MeLaSen Electronics MLSH11 Fan Remote Controller Instruction Manual
- June 12, 2024
- MeLaSen Electronics
Table of Contents
MeLaSen Electronics MLSH11 Fan Remote Controller
Product Information
- Model: MLSH11
- IC: 26807-MLSH11
- FCC ID: 2AYGE-MLSH11
- Manufacturer: MeLaSen Electronics Ltd.
- Address: No.29 Industrial Road, Xiaolan Industrial Estate, Xiaolan Town, Zhongshan, 528415 Guangdong, P.R. China
Product Usage Instructions
- Ensure that the product is placed on a stable and level surface before use.
- Connect the power cable to the appropriate power source and the product.
- Turn on the product using the power button located on the front panel.
- Use the control panel or remote control to navigate and select desired settings.
- If applicable, refer to the user manual for specific instructions on advanced features and functions.
- To turn off the product, press the power button again or use the designated power-off option.
- When not in use, unplug the power cable from the power source and store the product in a safe place.
Please note that this is just a brief overview of the product usage instructions. For detailed instructions and safety information, refer to the complete user manual provided with the product.
Model: MLSH11
IC: 26807-MLSH11
FCC ID: 2AYGE-MLSH11
Manufacturer: MeLaSen Electronics Ltd.
Address: No.29 Industrial Road, Xiaolan Industrial Estate, Xiaolan Town,
Zhongshan, 528415 Guangdong, P.R. China
OVERVIEW
FCC
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>