VICTOR VCT1226 Thermal Printing Calculator Instruction Manual

VICTOR VCT1226 Thermal Printing Calculator Instruction Manual

VCT1226

SERIES 1226
12-DIGIT DISPLAY
(10-Digit Automatic Large Print)
Thermal Printer

PREFACE

Congratulations on your choice of a Victor printing calculator. Careful design, quality materials, painstaking workmanship, and advanced research and productions facilities have given you a calculator that, with proper care, will provide years of trouble-free service.

This operating manual describes the features and operation of the Victor 1226 Thermal Printing Calculator. This calculator also features the four basic arithmetic operations, grand total, sigma, percentage, percent of change, change sign, item count, non-date add functions, programmable tax rate, back space, cost, sell, margin, and four key memory functions.

SPECIFICATIONS

• Display: 12 digits LCD
• Printing Speed: 6.0 lines/second
• Printing Paper: Width 58mm, (2.25inch) MAX MUST USE THERMAL PAPER ROLLS
• Print Color: Black (Negative Numbers in Bold)
• Power Sources 1) AC100V-240V 2) 50/60Hz
• Ambient Temperature: 0°~40°C (32°~104°F)
• Power Consumption: 4.5W
• Dimensions: 260mm(L) x 198mm(W) x 65mm(H)
• Weight: 1.4 lbs

PREPARATION

A. Power Source
This unit receives its operating power from the AC power source. When power is in ON position, pressing [#/P] key will only print the digits displayed in the front panel.

B. Loading Paper (USE THERMAL PAPER ONLY)

SLEEP MODE FUNCTION

Product powers down after 5 minutes of inactivity. To Wake the calculator, press the [C/CE] key for 5 seconds

DISPLAY SYMBOL

M : A number has been stored in memory
E : Error or overflow of capacity
-: The display value is negative

KEYBOARD IDENTIFICATION

SLIDE SWITCHES

KEYBOARD FUNCTIONS

DATE & TIME KEYS

DATE FORMAT

While displaying the date, depressing the %± key allows changing the date format mode from MM-DD-YYYY to DD-MM-YYYY or YYYY-MM-DD. The default date format is MM-DD-YYYY.

SET DATE & TIME

1. Press TIME and then press and hold SET. (The first digit of the month will flash)
2. Enter the month MM using the number keys. (The first digit of the date will flash)
3. Enter the date DD using the number keys. (The first digit of the year will flash)
4. Enter the year YYYY using the number keys. (The first digit of the month will flash)
5. Press SET to confirm the date.
6. Press TIME and then SET. Enter the time using the number keys. Press AM/PM to toggle morning or afternoon and press SET to confirm the time.
7. Press 12/24 to switch between 12-hour or 24-hour clock.

REPLACING THE BACK-UP BATTERY

1. Using a screwdriver remove the three screws on the back cover of the calculator.
2. To separate the front and back cover halves, carefully insert and twist a flat-blade screwdriver between them.
3. Use a flat-blade screwdriver to gently pry out the battery.
4. Position the new battery so the positive (+) side is up. Slide one edge of the battery under the tab on the battery holder, then press the battery into place.
5. Snap the cover halves back together. Then reinsert and tighten the screws.

NOTE: Memory backup battery retains the tax rate, calendar, and clock setting, when the power is off or when the AC cord is disconnected.
Battery: 1 Lithium battery (Type: CR 2032) Battery life: Backup time 1000 hours
RESET: Electromagnetic interference or electrostatic discharge may cause the display to malfunction or the contents of the memory to be lost or altered. Should this occur, use the tip of a ball point pen (or similar sharp object) to press the [RESET] button on the bottom of the calculator. After resetting, be sure to set the tax rate, time, and date again.

CAUTION:
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.

OPERATION EXAMPLES

[OFF/NP/P/IP] = P, [Σ / GT / TAX SET] = Σ, [• 5/4T ] = ANY SETTING, [A/0/2/3/4/F] = F

Four fundamental arithmetic calculations

Constant multiplication and division calculation

Percentage calculation

Memory calculation

Correcting mistaken entry

Decimal select

Rounding calculation

Application calculation

Business sales calculation

Δ% key operation example

*Adds the total register to the GT register by the (/T) key**

Calculate included TAX or excluded TAX operation

Overflow

WARNING

WARRANTY

Your new VICTOR electronic calculator is guaranteed to the Original purchaser for two years for all parts and labor, providing repair work is performed at an authorized VICTOR
Regional Service Center and the unit are sent by prepaid mail. For Service Centers outside the USA please consult your local office supply Dealer or Victor’s Web Site.
Warranty repair requires a copy of the original purchase invoice or receipt to be packed with the machine.

Any warranty, statutory or otherwise, does not include service and or replacement or repair of parts when damage or defect is a result of accident, abuse, or the elements.
To register your warranty please emails us your registration through our website or by emailing it to registration@victortech.com.

Corporate Office and National Service Center:
Phone: 800-628-2420
Fax: 630-972-3920
Website: www.victortech.com

Read More About This Manual & Download PDF:

References

• Victor Technology - Calculators, Standing Desks, Sit-to-Stand Desks, Desktop Organization
• Victor Technology - Calculators, Standing Desks, Sit-to-Stand Desks, Desktop Organization

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>