SURDYKE 66000130 HD Booster Battery Kit Instruction Manual
- June 3, 2024
- SURDYKE
Table of Contents
HD Booster Battery Kit
Installation Instructions
66000130 HD Booster Battery Kit
-
Determine a good mounting location for the battery on your mower. Options:
a.) Option 1 Remove the two bolts that secure your mower’s handlebar to the frame. Install the Battery Support Bracket and reinstall bolts using included washers.
b.) Option 2 Purchase two 2″ x 3″ square U-bolts from the hardware store (or us) and mount the Battery Support Bracket to a section of your mower’s tube frame.
c.) Option 3 Drill (4) holes and Use 1/4″ bolts to secure the Battery Support Bracket to Mower Deck Cover.
d.) Option 4 Purchase with or use (12) cup magnets to secure the battery to Mower Deck Cover magnetically.
-
Install battery box with lid off. Install Lawn & Garden battery (not included). Use 7/16″ wrenches to secure auxiliary wire harness loop connectors to battery terminals. (Red first to positive battery terminal). Then install the Battery Box lid and secure the battery box to the Battery Support Bracket using included bungee cords.
-
Run the other end of the auxiliary wire harness over to your mower engine wiring. Connect the (2) bullet nose connectors from the booster battery to the matching connectors on your original wire harness. Note: These instructions assume that you have already followed the original installation instructions for your Green Guard Complete Installation Kit. Which would have included splicing into your engine wiring to power The Green Guard. This will allow the engine to recharge the HD booster battery when the mower is running.
-
Secure the wiring with the included zip ties. Be sure the wiring is kept clear of rotating and hot parts.