BRAUN 310s Wet and Dry Shaver Instruction Manual
- June 12, 2024
- Braun
Table of Contents
BRAUN 310s Wet and Dry Shaver
ASSEMBLY INSTRCUTION
Read these instructions completely, they contain safety information. Keep them for future reference.
Warning
This appliance is suitable for cleaning under running tap water. Detach the
appliance from the power supply before cleaning it with water.
Model 310s w &d only
This appliance is suitable for cleaning under running tap water and for use
in a bathtub or shower. For safety reasons it can only be operated cordless.
When using it in the shower, we recommend applying shaving foam or gel.
This appliance is provided with a special cord set, which has an integrated
Safety Extra Low Voltage power supply. Do not exchange or tamper with any part
of it, otherwise there is risk of an electric shock.
Only use the special cord set provided with your appliance.
If the appliance is marked 492, you can use it with any Braun power supply
coded 492-XXXX. Do not shave with a damaged foil or cord. This appliance can
be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning the safe use of
the appliance and understand the hazards involved. Children should not play
with the appliance. Cleaning and user maintenance should not be made by
children unless they are older than 8 years and supervised.
For hygienic reasons, do not share this appliance with other persons.
Description
- Foil & Cutter cassette
- On/off button
- Charge indicator
- Shaver power socket
- Special cord set ( design may differ)
- Protection cap
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 5 °C to 35 °C. The battery may not charge properly or at all under extreme low or high temperatures. Recommended ambient temperature for shaving is 15 °C to 35 °C. Do not expose the shaver to temperatures higher than 50 °C for extended periods of time
- Using the special cord set (5), connect the shaver to an electrical outlet with the motor switched off. When charging for the first time or when the shaver is not used for a few months, leave the shaver to charge continuously for 4 hours.
- Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour.
- A full charge provides up to 20 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles.
- 5-minute quick charge is sufficient for a shave.
- Models 301 s/300s only: You can also shave by connecting the shaver to an electrical outlet via the special cord set.
Charge indicator (3)
The charge indicator shows the battery status.
- Charging: slow flashing
- Low battery: fast flashing
- Fully charged / during operation: continuously lighting up
Shaving
Press the on/off button (2) to operate the shaver. The flexible shaving foils
automatically adjust to every contour of your face.
Tips for a perfect dry shave
For best results, Braun recommends you follow 3 simple steps:
- Always shave before washing your face.
- At all times, hold the shaver at right angles (90°) to your skin.
- Stretch your skin and shave against the direction of your beard growth.
Cleaning
Regular cleaning ensures better shaving performance.
Cleaning under running water
- Switch the shaver on (cordless) and rinse the shaver head under hot running water until all residues have been removed. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
- Next, switch off the shaver, remove the Foil & Cutter cassette ( 1) and let it dry.
- If you regularly clean the shaver under water, then once a week apply a drop of light machine oil (not included) onto the Foil & Cutter cassette ( 1).
Cleaning with a brush
- Switch off the shaver. Remove the Foil & Cutter cassette and tap it out on a flat surface.
- Use a small brush with soft bristles (not included) and clean the inner area of the shaver head. However, do not clean the Foil & Cutter cassette with a brush as this may damage it.
Keeping your shaver in top shape
Shaving parts
To maintain 100% shaving performance, replace the Foil & Cutter cassette (1),
after about 18 months or when worn.
- Foil & Cutter cassette: 21 B
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the
shaver has to be fully discharged by shaving every 6 months approximately.
Then recharge the shaver to full capacity.
Environmental notice
Product contains batteries and/or recyclable electric waste. For environment
protection do not dispose of in household waste, but for recycling take to
electric waste collection points provided in your country. Subject to change
without notice.
Guarantee
We grant a 2 year guarantee on the product commencing on the date of purchase.
Within the guarantee period we will eliminate any defects in the appliance
resulting from faults in materials or workmanship, free of charge either by
repairing or replacing the complete appliance at our discretion. This
guarantee extends to every country where this appliance is supplied by Braun
or its appointed distributor. This guarantee does not cover: damage due to
improper use, normal wear and tear (e.g. shaver foil or cutter block) as well
as defects that have a negligible effect on the value or operation of the
appliance. The guarantee becomes void if repairs are undertaken by
unauthorized persons and if original Braun parts are not used. To obtain
service within the guarantee period, hand in or send the complete appliance
with your sales receipt to an authorized Braun Customer Service Centre
(address information available online at
www.service.braun.com).
For UK only:
This guarantee in no way affects your rights under statutory law.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>