carmanah MX Series Solar Panel Top of Pole Mount Kit Installation Guide
- June 12, 2024
- carmanah
Table of Contents
SOLAR PANEL TOP OF POLE MOUNT KIT INSTALL GUIDE
LEVEL 4
MX Series Solar Panel Top of Pole Mount Kit
-
Install included grommet and six bolts into casting.
Discard single longer bolt. Only thread in a few turns so bolts do not protrude inside.
-
Fasten sheet metal brackets to casting with four bolts and flat washers.
-
Place casting/bracket assembly on back surface of solar panel. Align bracket holes with solar panel frame holes and fasten as shown with included hardware: four bolts, four lock nuts and eight flat washers.
When exposed to light, solar panels generate electricity that can produce a shock or burn. To render them safe during installation, fully cover their front surface with an opaque material. -
Slide casting over top of pole and orient so panel faces south (in North America). Tighten six casting bolts to secure casting to pole.
-
Route solar cable provided with cabinet down pole. Make cabinet connections before mating connectors from solar panel. See LEVEL 2 MX 300/400 Solar Cabinet Module Install Guide for details.
-
If using 3/4″ flexible conduit mount kit, route conduit as shown and fasten conduit clamps with supplied bolts and nuts.
NOTE: READ ALL INCLUDED INSTALL GUIDES BEFORE SYSTEM INSTALLATION
Carmanah Technologies Corp.
250 Bay St, Victoria, BC V9A 3K5, Canada
1.250.380.0052
customersupport@carmanah.com
carmanah.com
References
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>