bol com XQN-898 Electric Mosquito Swatter User Manual
- June 12, 2024
- bol com
Table of Contents
bol com XQN-898 Electric Mosquito Swatter
Product Information
- Product Name: Electric Mosquito Swatter
- Model: XQN-898
- Power: 2W
- Voltage: 3000 V
- Certificates: RoHs and CE (EN 55014-1: 2017 +
- A11: 2020; EN 55014-2: 2015; EN 61000-3-2: 2014; EN 61000-3-3: 2013 + A1: 2019)
- Manufacturer: Jieyang Kailiya Electricals Co, LTD
Product Usage Instructions
- Ensure that the electric mosquito swatter is fully charged or connected to a power source before use.
- To activate the electric mosquito swatter, press the power button located on the handle.
- When using the electric mosquito swatter, keep in mind that there is high voltage on the metal mesh surface. Do not touch the metal mesh surface with your hands or any metal objects to avoid electric shock.
- Keep the electric mosquito swatter away from the reach of children to prevent accidents.
- To effectively kill mosquitoes or other flying insects, swing the electric mosquito swatter towards them and make contact with the target. The high voltage on the metal mesh surface will electrocute the insects upon contact.
- After use, make sure to turn off the electric mosquito swatter and disconnect it from the power source if applicable.
- Clean the metal mesh surface of the electric mosquito swatter regularly to remove any dead insects or debris. Ensure that the swatter is disconnected from the power source before cleaning.
Product feature
- The product has a built-in lithium battery for power supply;
- After the electric mosquito swatter is out of use, it has the function of automatically eliminating the residual electricity on the high-voltage network;
- The product is equipped with mosquito-trapping violet light, and the 360-400mm mosquito-trapping wavelength is specially selected;
- The power grid voltage is about 3000V during operation;
- Product charge display function;
- The product is equipped with overcharge, over discharge, over current, and load short circuit protection to accurately detect the charging voltage, ensure the safety of charging;
Product usage
- For the first time, please charge the product for 3-4 hours; The product can be used while charging:
- When charging, insert the USB plug of the 5V charger into the charging port of the product, and first push the power switch to the lowest OFF position when the charging indicator on the product turns to normally on, it indicates that the product is full charged, the charging time is about 3 hours;
- Conventional mosquito control method: push the power switch on the right side of the product to the ON1 position (middle position), and press and hold the front handle high voltage button switch, high voltage working indicator light — red light is on, at this time, the metal mesh is provided with high voltage, and the mosquito will be killed immediately when waving the swatter and mosquito contact the net. When the button switch is released, the indicator light goes out, and the metal net is still on if there is residual voltage, please do not touch the metal net. After a few seconds, the voltage will be eliminated automatically;
- Intelligent mosquito control method: push the product power switch to ON2 (top), and the LED mosquito trap violet light will be on, the power grid is equipped with high-voltage electricity, and then the tail of the electric mosquito swatter is inserted into the self- contained base to form a standing mode, the mosquito and harmful flying insects will be killed by touching when they are attracted by the purple light on the product and fly to the electric net;
- Turn off the mosquito killing function: push the power switch to the OFF position (the lowest part);
- When using the intelligent mosquito control mode, please insert the charging cable into the handle to ensure that the electric mosquito swatter can be used continuously for one night. If the charging line is not inserted, the working time of the product is about 2 hours;
Matters needing attention
- When the electric mosquito swatter works, there is high voltage on the metal mesh surface!Do not touch the metal mesh surface with hands or metal objects. Keep away from children, please pay attention to safety!
- Do not use this product in places where there may be flammable gas or dust, and do not often use conductive materials on the metal net;
- After use, please push the power switch to the OFF position and turn off the power!
- In order to ensure the service life of lithium battery, if there is no obvious effect of striking mosquitoes, or when the indicator light of the power of lithium battery flashes, it means that the battery power has been basically used up. Please stop using and charge the product in time, otherwise, when the voltage of the lithium battery is lower than 2.8V, the low-voltage protection function of the product will make the product enter the protection state and fail to work. it can only be used after charging;
- If it is not used for a long time, charge it every other month for about 3 hours, and store the product in a ventilated and dry places with relative temperature less than 80% where shall be free of corrosive chemicals.
- Do not use a wet towel to wipe or wash the mosquito remains on the net with water. Use a long soft brush or tap a few times to let mosquitoes fall off (mosquito remains may cause short circuit of metal mesh and damage the electric mosquito swatter, please remove it in time).
- Please do not pat other hard parts of the product or press the metal mesh to avoid damage.
- Please operate in strict accordance with the use instructions and precautions, and do not dismantle at will.
- The company shall not bear any responsibility for the adverse consequences caused by illegal operation;
- Product Name: Electric Mosquito Swatter
- Model: XQN-898
- Power: 2W, 3000 V
- Certificates: RoHs and CE (EN 55014-1: 2017 + A11: 2020; EN 55014-2: 2015; EN 61000-3-2: 2014; EN 61000-3-3: 2013 + A1: 2019)
- Manufacturer: Jieyang Kailiya Electricals Co, LTD
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>