ipega PG-P5V002L Charging Station for PS VR 2 and P5 Controllers User Manual

: June 12, 2024
: ipega

Table of Contents

Charging Station for PS VR 2 & P5 Controllers
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Charging Station for PS VR 2 & P5 Controllers

User Manual(PG-P5V002L)

Product illustration

VR headset stand
VR controller charging slot L
P5 controller charging slot L
Charging on/off
Light on/off
Charging indicator L
Charging port(output)1-2
AC power port
Charging adapter storage
VR controller charging slot R
P5 controller charging slot R
Light bar
Charging indicator R

Product Description

This product can be used for storage of VR headset, VR controller and P5 controller.
Charging for VR headset, VR controller and P5 controller
The structural layout is compact, simple and practical.
Equipped with a charging cable with two USB-A plug.
With 2 USB data expansion ports
Dazzling RGB light effect.

Compatible with P5 controller and P5 edge controller

Specifications

Input : DC 5V/3A
Output: DC 5.2V/2.8A
VR controller charging current: 550mA (single)
VR controller charging hours: ~1.5 hours
P5 controller charging current: 650mA (single)
P5 controller charging hours: ~3 hours

Assembly Instructions:

Step-By-Step Assembly Instructions
ipega PG-P5V002L Charging Station for PS VR 2 and P5
A3

Product instructions:

1.Assemble the product components according to the assembly diagram. Please use the accompanying charging cable to power the product from the USB port of P5 console.

2. “P5 controller charging slot L” and “P5 controller charging slot R” can be used to charge the P5 controller. When charging, the corresponding “P5 controller charging indicator L” and “P5 controller charging indicator R” will light up in red, and turn blue when fully charged.

3. Insert the magnetic head provided with the product into the Type-C interface of the VR controller. “VR controller charging slot L” and “VR controller charging slot R” can be used to charge the VR controller through the magnetic head. When charging, the corresponding “VR controller charging indicator L” and “VR controller charging indicator R” will light up in red, and turn blue when fully charged.

4. Total 10 lighting effect will switch in sequence: 1. Horse racing lamp, 2. Spectrum cycle, 3. Seven-color jump, 4. Red constant light, 5. Green constant light, 6. Blue constant light, 7.Yellow-green constant light, 8. Cyan constant light, 9. Purple constant light, 10. White constant light.
Short press the RGB light effect switch key to switch among the 10 lighting effects and turn off the lights. When the power is off, the current light mode will be saved automatically. Long press the RGB light effect switch key for three seconds to save the current light effect and turn off the RGB light. When the RGB light effect is switched again, the saved light mode will be turned on.

5. Controller charging control switch: can turn on or off the controller charging function and charging indicators.

6. Two USB charging output (without data connection function)

Note

When charging the controller, please make sure to correctly place it into the controller charging slot.
Please note that the P5 Elite Edition controller cannot be charged when equipped with lever-style back buttons.
TYPE-C is the charging input interface, and USB is the charging output interface. Do not reverse the connections.
Please make sure to fully insert the charging adapter into the VR2 controller.
This product has charging protection function: if a short circuit or reverse placement of the controller is detected, it will automatically shut off. If charging is not possible, please try removing the controller from the base and correctly re-placing it to restore the base’s functionality.
Please keep away the fire or heating area while charging the controller.
Non professional personnel should not disassemble the product, otherwise it will not be covered in the after-sales warranty service.
Please do not store this product in wet or high-temperature areas.