carmanah MX 100 Solar Panel User Guide
- June 12, 2024
- carmanah
Table of Contents
MX Series
MX 100 SOLAR PANEL REPLACEMENT GUIDE
LEVEL 4
MX 100 Solar Panel
-
Disconnect solar connector and then battery connector(s).
-
Drill out four rivets securing solar panel assembly to MX 100 chassis, using a 0.161″ drill bit.
-
Ensure all rivets have been cleared from mounting holes and all metal debris has been removed from MX 100 chassis.
-
Fit replacement MX 100 solar panel assembly in the same manner using included rivets.
-
Ensure rivets protrude completely through MX 100 chassis before riveting.
-
Ensure housing flange is between lid flange and hinge.
NOTE
Ensure housing flange is between hinge leaf and lid flange before riveting. -
Reconnect battery connector(s).
-
Ensure you have enough slack with solar harness and reconnect to circuit board.
-
Close, latch and lock MX 100.
NOTE
Check MX Field App to ensure solar panel is producing suitable voltage.
Carmanah Technologies Corp.
250 Bay St, Victoria, BC V9A 3K5, Canada
1.250.380.0052
customersupport@carmanah.com
carmanah.com
References
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>