SONOFF Micro 5V Wireless USB Smart Adaptor User Guide
- June 12, 2024
- SonOFF
Table of Contents
Micro
Quick Guide v1.2
USB Smart Adapter
Download the ewe link App
Power on
After powering on, the device will enter the pairing mode by default during
the first use, and the WiFi LED indicator is “flash quickly”.
The device will exit the pairing mode if do not operate within 3mins. If you
want to enter the pairing mode again, press and hold the device button for SSD
until the WiFi LED indicator is “flash quickly”.
Add Device
Tap “+” and select “Scan QR code” to add the device by scanning the QR code on
the device.
User Manual
https://sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the detailed user manual and help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
TX Frequency/RX Frequency:
WiFi: 2412-2472MHz/2422-2462MHz
Output Power:
11.49dBm(802.11b), 10.61dBm(802.11g), 11.09dBm(802.11n20), 11.44dBm(802.11n40)
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio
equipment type Micro is In compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet
address: https://www.sonoff.tech/usermanuals
Shenzhen Soloff Technologies Co., Ltd.
1001, BLDG8, Jianhua Industrial Park, Shenzhen, GD, China
ZIP code: 518000
Website: sonoff.tech
Service email: support@itead.cc
MADE IN CHINA