HELY WEBER 6893410 Titan Thumb Lacing Orthosis Instruction Manual
- June 12, 2024
- HELY WEBER
Table of Contents
Titan Thumb
455
459
6893410 Titan Thumb Lacing Orthosis
Warnings and Instructions: Review carefully, proper applicat ion is
required
⚠ Warning: This device will not prevent or eliminate risk of injury. Do
Not Overtighten. If swelling, pain, skin irritation, or an unusual reaction
occurs, discontinue use immediately and consult your medical professional.
This device should not be worn by persons with known allergies to neoprene.
Care: Hand wash using mild soap. Rinse thoroughly. Air dry only. Do not tumble
dry.
|
---|---
1. Position hand in brace.| 2. Position the brace so the palm stay is below
the midhand crease.
|
3. Position the long thumb stay to follow the outside contour of the thumb
and arm.| 4. Pull and secure the narrow thumb strap to the brace.
|
5. Pull and secure the remaining two thumb straps.| 6. Attach the stay pod
along the side of the arm.
| 
7. Pull and fasten the lacing straps.
If necessary, re-adjust the stay pod so that the hook closure does not overlap
the laces.| 8. The finished application should fit below the forehand crease
and should not obstruct the knuckles.
https://qrco.de/bdwHol
Scan to watch application video
U.S. Patent No. 6893410, 6960176, 7033331, 7056298
1185 E Main St., Santa Paula, California 93060
California: 800-221-5465, National:
800-654-3241
International: 805-525-4244, fax:
805-933-2348
U.S. fax: 800-559-5975, www.hely-
weber.com
© 2023 Weber Orthopedics Inc. DBA
Hely & Weber all rights reserved
Rev E 4/23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>