ZEEVA ET-0780 Remote Control Gel Bead Tank Instruction Manual

ET-0780 Remote Control Gel Bead Tank
Instruction Manual ET-780 REMOTE CONTROL GEL BEAD TANK INSTRUCTION MANUAL
Size:420x110mm
Instruction Manual

 ET-0780 Remote Control Gel Bead Tank

Thank you for purchasing the Remote Control Gel Bead Tank. This manual provides more information about this RC Tank, please read the instructions before using.
WARNING: Keep gel beads out of reach of children

Product Overview

WARNING: CHOKING HAZARD Small balls. Not for children under 3 years

Package Contents

Includes:
1(One) Remote Control Gel Bead Tank
5.3in. x 5.8in. x 6.6in. (13.4cm x 14.7cm x 16.8cm)
1(One) Remote Controller 4.2in. x
4.1in. x 1.7in. (10.7cm x 10.5cm x 4.2cm)
1(One) Instruction Manual
2(Two) Bags(500pcs per Bag) Gel Beads

Specifications

Power supply:
Remote Control Gel Bead Tank:
Five (5) AAA 1.5V Alkaline Batteries (Not Included).
Remote Controller:
Two (2) AA 1.5V Alkaline Batteries (Not Included).
Frequency: 2.4 GHz

Remote Controller

Standard Control

Note: To avoid losing control, always pay attention when controlling the Remote Control Tank.
The joystick push to forward, the Remote Control Gel Bead Tank go forward
The joystick push to backward, the Remote Control Gel Bead Tank go backward
The joystick push to left, the Remote Control Gel Bead Tank turn left
The joystick push to right, the Remote Control Gel Bead Tank turn right
Press the Automatic Demonstration Button, The Remote Control Gel Bead Tank will move automatically
Press the Bullet Fired Button to shoot the gel bead
Power On/Off
Remote Control Gel Bead Tank:
Slide the ON/OFF Switch to ON to turn on the Remote Control Gel Bead Tank.
Slide the ON/OFF Switch to OFF to turn off the Remote Control Gel Bead Tank.
Remote Controller:
The Remote Controller will be turned on automatically when the batteries have Installed.
“Remove batteries it product is not being used.

Batteries Installation

For Remote Control Gel Bead Tank
To install batteries into the Remote Control Gel Bead Tank. unscrew the screw on the battery box cover to open the cover. Insert 5 x -AAA’ 1.5V batteries (Not Included) into the battery box. Batteries should be placed as shown on the diagram. Replace battery box cover and tighten the screw.
For Remote Controller
To install batteries into the Remote Controller, unscrew the screw on the battery box cover to open the cover. Insert 2 x ‘AA” 1.5V batteries (Not Included) into the battery box. Batteries should be placed as shown on the diagram, Replace battery box cover and lighten the screw.
(Notice: When inserting the batteries. you must insert according to the correct polarity, the Remote Control Gel Bead Tank and the Remote Controller won’t function if batteries are reversed )

Soak Gel Beads Steps

Pour 500 pcs of the bag gel beads into a container or and inject purified water for about 6.09 oz. After soaking the bullets for 4 hews or more, the diameter of the gel bead increases to 0.276 inches 0.315 inches (the increase of water volume and the duration of immersion cannot make the gel beads continue to increase). It can then be used in conjunction with the emitter. Light and heat cause the gel beads to shrink and can be repeatedly dropped into the water, making it larger again.

Operation Method of Gel Beads

Open the lid on the top of the tank, then pour in the right amount of gel beads, then close the lid.
(Note: do not add water when adding gel beads to prevent short circuit of the circuit version.)
ATTENTION: If the gel beads are not launched as usual, please move the car back and forth, and then try to launch again.

Performance Tips

1. Do not drive the Remote Control Gel Bead Tank on grass. sand or go through water.
2. Do not drive the Remote Control Gel Bead Tank in windy or rainy weather.
3. Do not drive the Remote Control Gel Bead Tank into any sharp object.
4. Keep fingers, hair and loose clothing away from Remote Control Gel Bead Tank.

Care and Maintenance

Always use dry and soft cloth to clean this product.
Avoid this product from being exposed to sunlight or heat.
Avoid immersing these toys in water, otherwise, the electronic parts may be damaged.
Check the product regularly. If any damages are discovered, please stop using immediately, until It is completely repaired in good working condition

IMPORTANT: BATTERY INFORMATION
For AA Batteries
WARNING: TO AVOID BATTERY LEAKAGE

1. Be sire to insert the battens correctly. and always follow the toy/game and battery manufacturers’ instructions
2. Do not mix old and new batteries or alkaline. standard (carbon-zinc) or rechargeable (nickel-cadmum) batteries.
3. Always remove weak or dead battenes from the product.
4. Remove the battery if the product is is left unused for a long period of One.

IMPORTANT: BATTERY INFORMATION

For AAA Batteries
**** WARNING: TO AVOID BATTERY LEAKAGE

1. The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone American Association of Poison Control Centers (1-800-222-1222).
2. Always purchase the correct size and grade of battery most suitable for intended use.
3. Do not mix old and new batteries, alkaline, standard (Carbon – Zinc) or rechargeable (Nickel-cadmium) batteries.
4. Clean the battery contacts and those of the device prior to battery installation.
5. Ensure the batteries are installed correctly with the regard to polarity (+ and -).
6. Always remove batteries if consumed or if product is to be left unused for a long time.

Warning

This product is suitable to be used by people who has operating experience in remote toy or aged no less than 8 years old.
Please do not put the product in your mouth to prevent choking hazard of small parts. Please do not put the finger into available interspaces
Please do not play the product in a brutal way such as throwing, crashing or twisting it.
Please store the smaller-sized product accessones in places that are out of reach of children, in order to avoid the occurrence of accidents.
Avoid placing the batteries in places in high temperatures and avoid exposure to heat
When young children are operating the product, it shall be ensured that the adults are guiding and making sure the product control is within the viewing range of the controller (or instructor) so that it makes the control of the toy more convenient.
When the product is not in use, please switch off the power supplies of the toy, and remove the batteries from the product
Please note that we wont take any responsibility for any wrong operation as this may result in severe injury or loss of properly, and we cannot control the operating process during the time
when the user assembles or uses this product.
Once this product is sold we won’t be responsible for any safety responsibility during the time the user operates or uses controls this products.

FCC Statement

This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference recerved, including interference that may cause undesired operation.
Caution: changes or modifications not expressly approved by the party responsible for complance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with instructions may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/ TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2ADM5-ET-0780
Distributed by 1616 Holdings. Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106
Made In Shantou, China
Keep All Relevant Information for Future Reference
Item,* ET-0780

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>