Hanin Electronic TT4W2 WIFI Dongle User Manual
- June 12, 2024
- Hanin Electronic
Table of Contents
Hanin Electronic TT4W2 WIFI Dongle
Product Information
- Product Name: WIFI Dongle
- Input: 3.3V 0.5A
- Frequency Range: 2.4GHz-2.483GHz
- Operating Temperature: -40~105
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
WEEE (Waste Electrical and Electronic Equipment)
Directive: This information only applies to customers in the European Union,
according to Directive 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL OF 04 July 2012 on waste electrical and legal systems, and to
customers in countries in Europe, Middle East and Africa (EMEA) where they
have implemented equivalent regulations. For other countries, please contact
your local government to investigate the possibility of recycling your
product.
RF Exposure Statement: This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to.
- Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC Warning: This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- FCC ID: 2AUTE-TT4W2
- IC: 26218-TT4W2
- Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd.
- Made in: China
Product Usage Instructions
Installation: Open the machine shell and locate the motherboard wireless
module socket.
WI-FI Settings:
- Printer Wi-fi factory default is Off , and it needs to be turned on through men before use.
- In AP mode , the IP address is 192.168.1.1, SSID is TT4W Ap-xxxx (last four digits of Wi-fi Mac address).
- If you need to change the Wi-fi settings, please set it by the Utility tool.
Product specifications
- Product Name: WIFI Dongle
- Input: 3.3V 0.5A
- Frequency Range :2.4GHz-2.483GHz
- Operating Temperature :-40~105℃
- Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
WEEE(Waste Electrical and Electronic Equipment) Directive
This information only applies to customers in the European
Union, according to Directive 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL OF 04 July 2012 on waste electrical and legal systems, and to
customers in countries in Europe, Middle East and Africa(EMEA) where they have
implemented equivalent regulations . For other countries, please contact your
local government to investigate the possibility of recycling your product.
FCC RULE
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
This equipment meets the exemption from the routine evaluation limits in
section 2.5 of RSS-102. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC ID: 2AUTE-TT4W2
IC: 26218-TT4W2
Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd.
Made in China
Installation
Open the machine shell and locate the motherboard wireless module socket
WI-FI Settings Printer
Wi-fi factory default is Off , and it needs to be turned on through men before use . In AP mode , the IP address is 192.168.1.1 , SSID is TT4W Ap-xxxx( last four digits of Wi-fi Mac address ) . If you need to change the Wi-fi settings ,please set it by the Utility tool