EVERET EVP220L 20X Low Light SDI HD PTZ Video Camera User Manual

EVERET EVP220L 20X Low Light SDI HD PTZ Video Camera

SAFETY GUIDES

1. Before operation, please fully read and follow all instructions in the manual. For your safety, always keep this manual with the camera.
2. The camera power input range is 100-240VAC(50-60Hz),ensure the power supply input within this rate before powering on.
3. The camera power voltage is 12VDC, rated currency is 2A. We suggest you use it with the original power supply adapter supplied by the factory.
4. Pease keep the power cable, video cable and control cable in a safe place. Protect all cables especially the connectors.
5. Operational environment: 0℃-50℃, humidity less than 90%.To avoid any danger, do not put anything inside the camera, and keep away from the corrosive liquid.
6. Avoid stress, vibration and damp during transportation, storage and installation.
7. Do not detetch the camera housing and cover. For any service, please contact authorized technicians.
8. RF cable and control cable should be individually shielded, and cannot be substituted with other cables. Do not direct the camera lens towards strong light, such as the sun or the intensive light.
9. Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent when there is need to clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing.
10. Do not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera head by hand. NEVER MOVE THE CAMERA MANUALLY WHEN IT IS WORKING.
11. Put the camera on fixed and smooth desk or platform, avoid leaned installation.
12. Power Supply Polarity(Drawing) Note: the video quality may be affected by the specific frequencies of electromagnetic filed.

ACCESSORIES

Check all bellow items when open the package:

• Camera ········································································1

• Power Adapter ·······························································1

• Power Cable ··································································1

• RS232 Control Cable ·······················································1

• Remote Controller ···························································1

• User Manual ··································································1
  Double-sided Adhesive ·····················································1

• QC certification ······························································1

QUICK START

1. Check all cable connections before power on.

2. Dial Switch Setting (at the bottom of the camera):
   Dial Switch（ARM）

    | SW-1| SW-2| Instruction
   1| OFF| OFF| Updating mode
   2| ON| OFF| Debugging mode
   3| OFF| ON| Undefined
   4| ON| ON| Working mode

PRODUCT HIGHLIGHTS

1. Adopted advanced DSP, 1/1.8”, 2.3MP sensor and 20x optical lens, provides ultra crystal image quality.
2. Fast switching between different video format.
3. Fast and accurate focus.
4. Support remote firmware update.
5. Daisy chain function: with both Visca in and Visca out port, max 7 cameras can be controlled by RS232 port at Visca protocol.
6. Support RS485 interface
7. Support 128 presets.
8. Be compatible with major video conferencing terminal, customization offered.
9. IR remote controller offered, video format swtiched by one push.
10. IR transfer/IR pass function: except receiving the camera remote controller signal, the camera can also receive other codec’s IR remote control signal, and pass these IR control signal to the codec’s IR receiver (via VISCA IN port).
11. Multi language menu: English, Chinese, Russian, Spanish.

CAMERA SPEC

CAMERA INTERFACE

1. Camera Lens

2. Camera Base

3. IR Receiver Panel

4. Power Indicator Light

5. Power Input 12VDC
   Dial Switch

6. Tripod Screw Hole

7. Installation Hole

8. RS232/485 control port

9. RS 232 control port

10. HD-SDI port

11. DVI-Iport

12. DC12V plug

13. Power Supply Light

14. Power Indicator Light

CAMERA DIMENSION(MM)

IR REMOTE CONTROLLER

POWER
Under normal working mode, short press POWER key, the camera will enter stand by mode;
Press it again, the camera will do self-configuration, then go back to HOME position.
It will go to preset position if power on model has been set before. FREEZE （Not Supported）
Short press FREEZE key to freeze/ unfreeze the image.
IRT(IR Transfer/IR Pass)
Open or close the IR pass function. Once press the IRT key, the camera will receive and
pass the IR remote control signal to the codec/terminal(via VISCA IN port). SET 1~SET4 ADDRESS SETTING
Long press for 3seconds until the key light ON, to set camera address.
CAM1~CAM4（CAMERA SELECTING）
Short press to select the relative camera. NUMBER KEY(1-9)
Set preset: long press(3 seconds) the number key to set preset. Run preset: Short press the number key to run preset.
CLR PRE(CLEAR PRESET)
CLR PRE+ number key: to clear the relative preset.
Long press to clear all preset.
LEARN
Reserved, not available now. FOCUS KEY( ON THE LEFT)
Manual focus, only valid under manual focus model.
ZOOM KEY( ON THE RIGHT SIDE)
Set the zoom rate
NAVIGATE KEY: UP/DOWN/LEFT/RIGHT
Under working mode, use navigate key to set the pan tilt, and select menu when enter OSD.
OK /HOME KEY
Under working mode, short press OK to make the camera go back to HOME position; and confirm the selection when enter OSD.

• AF: Auto Focus
• MF: Manual Focus
• RESET: Reset camera
• MENU: Enter OSD menu
• LEARN+LIMIT L key: Set the pan tilt left limit position.
• LEARN+LIMIT R key: Set the pan tilt right limit position.
• LEARN+LMT CLR key: Clear the limit position.
• BLC OFF/ BLC ON： Not Available
• BRIGHT-/BRIGHT+: Set image brightness, only valid under bright

Video Format Keys: Long press 3 seconds to select different video format output.
Note: In special enviroment, due to heavy infrared interfere,(for instance: the camera is put on the screen with infrared touch function or there is strong light iodine-tungsten lamp), the camera IR receival maybe effected to execute wrong command. In this case, turn off IR receival by set 3-4 dial switch on the bottom to be OFF if users don’t need IR remote controller.

VISCA IN （RS232 PORT）

VISCA IN &Mini DIN Connection

VISCA IN &RS485 Connection

VISCA IN & DB9 Connection

VISCA Network Construction

SERIAL PORT CONFIGURATION

VISCA PROTOCOL

Part1 Camera Return Command

Ack/Completion Message

 | Command Packet| Note
ACK| z0 41 FF| Returned when the command is accepted.
Completion| z0 51 FF| Returned when the command has been executed.

z = camera adderss+8

Error Messages

 | Command Packet| Note
Syntax Error| z0 60 02 FF| Returned when the command format is different or when a command with illegal command parameters is accepted.

Command Not Executable

|

z0 61 41 FF

| Returned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus.

Part 2 Camera Control Command

CAM_Power

| On| 8x 01 04 00 02 FF| ****

Power ON/OFF

Off| 8x 01 04 00 03 FF

CAM_Zoom

| Stop| 8x 01 04 07 00 FF| ****

Tele(Standard)| 8x 01 04 07 02 FF
Wide(Standard)| 8x 01 04 07 03 FF
Tele(Variable)| 8x 01 04 07 2p FF| ****

p = 0(low)~7(high)

Wide(Variable)| 8x 01 04 07 3p FF
Direct| 8x 01 04 47 0p 0q 0r 0s FF| pqrs: Zoom Position     (0(wide)

~0x4000(tele))

CAM_DZoom

| ON| 8x 01 04 06 02 FF|
OFF| 8x 01 04 06 03 FF
CAM_Focus| Stop| 8x 01 04 08 00 FF|
Command| Function| Command Packet| Note
---|---|---|---
 | Far(Standard)| 8x 01 04 08 02 FF|
Near(Standard)| 8x 01 04 08 03 FF
Direct| 8x 01 04 48 0p 0q 0r 0s FF| pqrs: Focus Position
One Push AF| 8x 01 04 18 01 FF|

CAM_AFSensitivity (new)

| ****

AF sensitivity

| ****

8x 01 04 68 0p FF

| p: AF sensitivity 1:High 2:Normal

3:Low

CAM_ZoomFocus

| ****

Direct

| 8x 01 04 47 0p 0q 0r 0s 0t 0u 0v 0w FF| pqrs: Zoom Position     (0(wide)~ 0x4000(tele))

tuvw: Focus Position

CAM_WB

| Auto| 8x 01 04 35 00 FF|
Indoor| 8x 01 04 35 01 FF|
Outdoor| 8x 01 04 35 02 FF|
OnePush| 8x 01 04 35 03 FF|
ATW| 8x 01 04 35 04 FF|
Manual| 8x 01 04 35 05 FF|

CAM_RGain

| Reset| 8x 01 04 03 00 FF| ****

Manual Control of R Gain

Up| 8x 01 04 03 02 FF
Down| 8x 01 04 03 03 FF
Direct| 8x 01 04 43 00 00 0p 0q FF| pq: R Gain     (0~0xFF)

CAM_Bgain

| Reset| 8x 01 04 04 00 FF| ****

Manual Control of B Gain

Up| 8x 01 04 04 02 FF
Down| 8x 01 04 04 03 FF
Direct| 8x 01 04 44 00 00 0p 0q FF| pq: B Gain     (0-0xFF)

CAM_AE

| Full Auto| 8x 01 04 39 00 FF| Automatic Exposure mode
Manual| 8x 01 04 39 03 FF| Manual Control mode
Bright| 8x 01 04 39 0D FF| Bright mode(Manual control)

CAM_Shutter

| Reset| 8x 01 04 0A 00 FF| ****

Shutter Setting

Up| 8x 01 04 0A 02 FF
Down| 8x 01 04 0A 03 FF
Direct| 8x 01 04 4A 00 00 0p 0q FF| pq: Shutter Position      (0~0x15)

CAM_Iris

| Reset| 8x 01 04 0B 00 FF| ****

Iris Setting

Up| 8x 01 04 0B 02 FF
Down| 8x 01 04 0B 03 FF
Direct| 8x 01 04 4B 00 00 0p 0q FF| pq: Iris Position       (0~ 0x11)
CAM_Gain| Reset| 8x 01 04 0C 00 FF| Gain Setting
Command| Function| Command Packet| Note
---|---|---|---
 | Up| 8x 01 04 0C 02 FF|
Down| 8x 01 04 0C 03 FF
Direct| 8x 01 04 0C 00 00 0p 0q FF| pq: Gain Positon (0~0x0E)

CAM_Bright

| Reset| 8x 01 04 0D 00 FF| ****

Bright Setting

Up| 8x 01 04 0D 02 FF
Down| 8x 01 04 0D 03 FF
Direct| 8x 01 04 4D 00 00 0p 0q FF| pq: Bright l Positon      ()

CAM_WDR

| On| 8x 01 04 3D 02 FF| ****

Exposure Compensation ON/OFF

Off| 8x 01 04 3D 03 FF
Direct| 8x 01 04 2D pq FF| pq: ExpComp Position (0~0x6E)

CAM_BackLight(BLC)

| On| 8x 01 04 33 02 FF| BackLight On
Off| 8x 01 04 33 03 FF| BackLight Off

CAM_Sharpness

| Reset| 8x 01 04 02 00 FF| ****

Aperture Control

Up| 8x 01 04 02 02 FF
Down| 8x 01 04 02 03 FF
Direct| 8x 01 04 42 00 00 0p 0q FF| pq: Aperture Gain (0~0x0F)

CAM_Memory(preset)

| Reset| 8x 01 04 3F 00 0p FF| ****

p: Preset Number(=0 to 127) Corresponds to 0 to 9 on the Remote Commander

Set| 8x 01 04 3F 01 0p FF
Recall| 8x 01 04 3F 02 0p FF

CAM_LR_Reverse

| On| 8x 01 04 61 02 FF| ****

Image Flip Horizontal ON/OFF

Off| 8x 01 04 61 03 FF

CAM_PictureFlip

| On| 8x 01 04 66 02 FF| ****

Image Flip Vertical ON/OFF

Off| 8x 01 04 66 03 FF

CAM_RS485Ctl(new)

| On| 8x 01 06 A5 02 FF|
Off| 8x 01 06 A5 03 FF

CAM_VGACtl(new)

| VGA| 8x 01 06 B6 02 FF|
YPbPr| 8x 01 06 B6 03 FF

CAM_TransferCtl(new)

| On| 8x 01 06 1A 02 FF| Receive IR(remote commander) CODE from VISCA communication ON/OFF
Off| 8x 01 06 1A 03 FF

CAM_LanguageSet (new)

CAM_Contrast(new)

| ****

Language

Contrast

| ****

8x 01 06 D3 0p FF

8x 01 04 A2 00 00 0p 0q FF

| P:language:

1:English 2:Chinese 3:Russian 4:Spanish

pq :contrast level     0x00~0xff

CAM_Saturation(new)| Saturation| 8x 01 04 A1 00 00 0p 0q FF| pq :saturation level     0x00~0xff
Command| Function| Command Packet| Note
---|---|---|---

CAM_PWR_ACT(new)

| Preset 0| 8x 01 06 A8 00 FF| ****

Auto run to preset setted after power on

Preset 1| 8x 01 06 A8 01 FF
Off| 8x 01 06 A8 02 FF
CAM_SpeedByZoom (new)| On| 8x 01 06 A0 02 FF|
Off| 8x 01 06 A0 03 FF
CAM_PTSpeed(new)| PT Speed| 8x 01 04 C1 00 00 0p 0q FF| pq :PT speed 0x05~0x18
CAM_ZoomSpeed(new) (remote)| ****

Zoom Speed

| ****

8x 01 04 D1 00 00 0p 0q FF

| ****

pq :Zoom speed     0x01~0x07

CAM_TrackMode(new)

| Fluent| 8x 01 06 C5 02 FF|
Precise| 8x 01 06 C5 03 FF

CAM_MenuMirror(new)

| Normal| 8x 01 06 C8 00 FF|
Mirror| 8x 01 06 C8 01 FF
CAM_SYSReset(new)| Reset| 8x 01 06 D2 01 FF|
CAM_CAMReset(new)| Reset| 8x 01 06 D2 02 FF|
CAM_ALLReset(new)| Reset| 8x 01 06 D2 03 FF|
CAM_ZoomDisplay (new)| On| 8x 01 06 C2 02 FF|
Off| 8x 01 06 C2 03 FF|
CAM_IRaddress(new)| IR address| 8x 01 06 D8 0p FF| p:IR address 1~4
CAM_Gamma(new)| Gamma set| 81 01 04 5B 0p FF| P:Gamma NO.

CAM_MountMode

| UP| 8x 01 04 A4 02 FF| Mount Up
Down| 8x 01 04 A4 03 FF| Mount Down
CAM_ColorGain| Direct| 8x 01 04 49 00 00 00 0p FF| (0~0x0E)
CAM_2D

Noise Reduction

| Direct| 8x 01 04 53 0p FF| (0~0x05)
CAM_3D

Noise Reduction

| Direct| 8x 01 04 54 0p FF| (0~0x03)

FLICK

| 50HZ| 81 01 04 23 01 FF|
60HZ| 81 01 04 23 02 FF|
OFF| 81 01 04 23 00 FF|

Freeze

| Freeze On| 81 01 04 62 02 FF| Freeze On Immediately
Freeze Off| 81 01 04 62 03 FF| Freeze Off Immediately
Preset Freeze On| 81 01 04 62 22 FF| Freeze On When Running Preset
Preset Freeze Off| 81 01 04 62 23 FF| Freeze Off When Running Preset

VideoSystem Set

|  | ****

8x 01 06 35 00 pp FF

| pp: 0~9 Video format 0:1080P59.94      5:1080P25

1:1080P50            6:720P59.94

2:1080I59.94        7:720P50

3:1080I50             8:720P29.97

SYS_Menu

| Menu On| 8x 01 06 06 02 FF| Turn on the menu
Menu Off| 8x 01 06 06 03 FF| Turn off the menu
Menu Back| 8x 01 06 06 10 FF| Menu step back
Menu Ok| 8x 01 7E 01 02 00 01 FF| Menu ok

IR_Receive

| On| 8x 01 06 08 02 FF| ****

IR(remote commander)receive ON/OFF

Off| 8x 01 06 08 03 FF
On/Off| 8x 01 06 08 10 FF

Pan_tiltDrive

| Up| 8x 01 06 01 VV WW 03 01 FF| ****

VV: Pan speed 0x01 (low speed) to 0x18 (high speed)

WW: Tilt speed 0x01 (low speed) to 0x14 (high speed)

YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD)

Down| 8x 01 06 01 VV WW 03 02 FF
Left| 8x 01 06 01 VV WW 01 03 FF
Right| 8x 01 06 01 VV WW 02 03 FF
Upleft| 8x 01 06 01 VV WW 01 01 FF
Upright| 8x 01 06 01 VV WW 02 01 FF
DownLeft| 8x 01 06 01 VV WW 01 02 FF
DownRight| 8x 01 06 01 VV WW 02 02 FF
Stop| 8x 01 06 01 VV WW 03 03 FF
AbsolutePosition| 8x 01 06 02 VV WW

0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

RelativePosition| 8x 01 06 03 VV WW

0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

Home| 8x 01 06 04 FF
Reset| 8x 01 06 05 FF

Pan-tiltLimitSet

| Set| 8x 01 06 07 00 0W

0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

| W:1 UpRight  0:DownLeft YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit Position(TBD)
Clear| 8x 01 06 07 01 0W

07 0F 0F 0F 07 0F 0F 0F FF

PART 3 INQUIRY COMMAND

FF

| pq: R Gain
CAM_BGainInq| 8x 09 04 44 FF| y0 50 00 00 0p 0q

FF

| pq: B Gain

CAM_AEModeInq

| ****

8x 09 04 39 FF

| y0 50 00 FF| Full Auto
y0 50 03 FF| Manual
y0 50 0A FF| Shutter priority
y0 50 0B FF| Iris priority
y0 50 0D FF| Bright
CAM_ShutterPosInq| 8x 09 04 4A FF| y0 50 00 00 0p 0q

FF

| pq: Shutter Position
CAM_IrisPosInq| 8x 09 04 4B FF| y0 50 00 00 0p 0q

FF

| pq: Iris Position
CAM_GainPosiInq| 8x 09 04 4C FF| y0 50 00 00 0p 0q

FF

| pq: Gain Position
CAM_ BrightPosiInq| 8x 09 04 4D FF| y0 50 00 00 0p 0q

FF

| pq: Bright Position
CAM_ExpCompModeIn q| 8x 09 04 3E FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_ExpCompPosInq| 8x 09 04 4E FF| y0 50 00 00 0p 0q

FF

| pq: ExpComp Position
CAM_ApertureInq| 8x 09 04 42 FF| y0 50 00 00 0p 0q

FF

| pq: Aperture Gain
CAM_MemoryInq| 8x 09 04 3F FF| y0 50pp FF| pp: Memory number last operated.
SYS_MenuModeInq| 8x 09 06 06 FF| y0 50 02 FF| On
 |  | y0 50 03 FF| Off
CAM_LR_ReverseInq| 8x 09 04 61 FF| y0 50 02 FF| On
 |  | y0 50 03 FF| Off
CAM_PictureFlipInq| 8x 09 04 66 FF| y0 50 02 FF| On
 |  | y0 50 03 FF| Off
CAM_IDInq| 8x 09 04 22 FF| y0 50 0p 0q 0r 0s FF| pqrs: Camera ID
CAM_VersionInq| 8x 09 00 02 FF| y0 50 ab cd

mn pq rs tu vw FF

|

VideoSystemInq

| ****

8x 09 06 23 FF

| ****

y0 50 pp FF

| pp: 0~9 Video format 0:1080P59.94       5:1080P25

1:1080P50            6:720P59.94

2:1080I59.94        7:720P50

3:1080I50             8:720P29.97

4:1080P29.97        9:720P25

IR_Transfer| 8x 09 06 1A FF| y0 50 02 FF| On
y0 50 03 FF| Off
IR_Receive| 8x 09 06 08 FF| y0 50 02 FF| On
y0 50 03 FF| Off

IR_ReceiveReturn

|  | y0 07 7D 01 04 00

FF

| Power ON/OFF
y0 07 7D 01 04 07

FF

| Zoom tele/wide
y0 07 7D 01 04 38| AF On/Off
 |  | FF|
---|---|---|---
y0 07 7D 01 04 33

FF

| CAM_Backlight
y0 07 7D 01 04 3F

FF

| CAM_Memory
y0 07 7D 01 06 01

FF

| Pan_tiltDrive
Pan-tiltMaxSpeedInq| 8x 09 06 11 FF| y0 50 ww zz FF| ww: PanMaxSpeed zz: Tilt Max

Speed

Pan-tiltPosInq| 8x 09 06 12 FF| y0 50 0w 0w 0w 0w

0z 0z 0z 0z FF

| wwww: PanPosition zzzz: Tilt

Position

Note: 【x】 means the camera address ;【y】=【x + 8】.

VISCA PAN TILT ABSOLUTE POSITION VALUE

VISCA PAN TILT SPEED VALUE

VISCA EXPOSURE VALUE

Shutter speed

|  | 60/30mode| 50/25mode| ****

Iris

| 0D| F1.55
---|---|---|---|---|---|---
21| 1/10000| 1/10000| 0C| F2.22
20| 1/6000| 1/6000| 0B| F2.51
19| 1/4000| 1/3500| 0A| F2.68
18| 1/3000| 1/2500| 09| F2.8
17| 1/2000| 1/1750| 08| F2.89
16| 1/1500| 1/1250| 07| F2.96
15| 1/1000| 1/1000| 06| F3.03
14| 1/725| 1/600| 05| F 3.08
13| 1/500| 1/425| 04| F3.13
12| 1/350| 1/300| 03| F3.18
11| 1/250| 1/215| 02| F3.22
10| 1/180| 1/150| 01| F3.4
9| 1/125| 1/120| 00| CLOSE
8| 1/100| 1/100|  |
7| 1/90| 1/75|  |
6| 1/60| 1/50|  |
5| 1/30| 1/25|  |
4| 1/15| 1/12|  |  |
3| 1/8| 1/6|  |  |
2| 1/4| 1/3|  |  |
1| 1/2| 1/2|  |  |
0| 1/1| 1/1|  |  |

Gain

| 0| 0dB|  | ****

Gain

| 8| 16dB
1| 2dB|  | 9| 18dB
2| 4dB|  | 10| 20dB
3| 6dB|  | 11| 22dB
4| 8dB|  | 12| 24dB
5| 10dB|  | 13| 26dB
6| 12dB|  | 14| 28dB
7| 14dB|  |  |

OSD MENU

1. Under working mode, press the MENU key on the IR remote controller, to enter the OSD menu as bellow:

2. After enter the main menu, use the
   navigate UP/DOWN key to select the main menu. Once been selected, the main menu will change to blue background, and the right side will show all sub menu options .

3. Press the navigate RIGHT key to enter sub menu; use UP/DONW key to select the sub menu;use LEFT/RIGHT key to select parameter.

4. Press the MENU key again to return to previous menu. Press the MENU key continuously to exit the OSD menu. Before exiting, will show up a window to select whether need to save all settings(useLEFT/RIGHT key to set). As bellow:

5. OSD Menu Setting List

SYSTEM

| PROTOCOL| VISCA
---|---|---
ADDRESS| VISCA:1~7               PELCO-P/D:1~255
BAUD RATE| 2400,4800,9600,115200
PTL LOCK| Protocol lock: once set, above protocol setting will be locked, to avoid changes
RS485| RS485 ON/OFF
VGA OUT| VGA output can be YPbPr or VGA output (customized)
TRANSFER| IR Transfer/IR Pass function
LANGUAGE| Chinese, English, Spanish, Russian

EXPOSURE

| EXPOSURE MODE| AUTO、MANUAL、BRIGHT, SHUTTER, IRIS
---|---|---
SHUTTER| Shutter speed:1/8~1/10000, only valid under manual mode
IRIS| Iris setting:CLOSE~F1.5, only valid under manual mode
GAIN| Gain setting:0dB~28dB , only valid under manual mode
 | BRIGHT| Bright setting:0~15, only valid under bright priority mode.
---|---|---
EC MODE| Exposure compensation ON/FF
EC POSI| Set exposure compensation lever
BLC| Back light compensation ON/FF

IMAGE

|

WB MODE

| White Balance:AUTO 、 INDOOR 、 OUTDOOR 、 MANUAL 、

OUTAUTO、ONEPUSH, ATW

---|---|---
R GAIN| Red gain level: 0~255, only valid under manual white balance mode.
B GAIN| Blue gain level:0~255 , only valid under manual white balance mode.
COLOR G| Color gain setting: 0~14 (Not Available)
FLICK| Anti-Flicker setting:50/60HZ, to reduce the video flicker
FREEZE| Image freeze when run preset(customization)
DZOOM| Turn on/off digital zoom
FOCUS| Select focus mode

QUALITY

|

2D NR

| 2D noise reduction:0~5, the bigger value, the less noise on image, the

lower resolution

---|---|---
3D NR| 3D noise reduction:0~3, the bigger value, the less motion noise on image.
SHARPNESS| Sharpness setting: 0~6, the higher value, the higher resolution.
CONTRAST| Set contrast level
SATURATION| Set saturation.
TRACK MODE| Absolute position mode selection: PRECISE/FLUENT
GAMMAR| Select gammar level

PTZ

| PWR ACT| Set power on action: OFF, PRE1, PRE2
---|---|---
SPEEDBYZ| Speed by zoom: proportional speed, the bigger zoom, the slower speed.
MOUNT M| Mount mode: up, down
FLIP.HOR| Flip horizontal
FLIP VER| Flip vertical
PT SPD| Set pan tilt speed
ZOOM SPD| Set zoom speed
MENU MIR| Turn on/off left/menu mirror function.

VIDEO FORMAT

| 1080P59.94| 1080P25|

Once selected, press OK key to confirm.

---|---|---|---
1080P50| 720P59.94
1080I59.94| 720P50
1080I50| 720P29.97
1080P29.97| 720P25

RESET

| SYS RESET| System reset
---|---|---
CAM RESET| Camera reset
PT RESET| Pan tilt reset
ALL RESET| All reset
ZOOM

DISPLAY

| Select if zoom display

MESSAGE

| IR ADDR| Camera IR control address
---|---|---
FOCUS| Focus mode
CLIENT| Client protocol, can’t be changed
MODEL NO.| Model number
ARM VER| ARM version
FPGA VER| FPGA version
CAM VER| Camera version
RELEASE| Software release date

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>