Hanin Electronic TT4B2 Bluetooth Dongle User Manual

Hanin Electronic TT4B2 Bluetooth Dongle

Product Information

• Product Name: Bluetooth Dongle
• Input: 3.3V 0.5A
• Frequency Range: 2.4GHz-2.483GHz
• Operating Temperature: -40~105

Product Usage Instructions

1. 1. Installation:

To install the Bluetooth Dongle, follow these steps:

1. 1.       1. Open the machine shell.

   2. Locate the motherboard wireless module socket.
2. Bluetooth Setting:

To set up the Bluetooth connection, follow these steps:

1. 1. Access the Bluetooth settings on your device.

2. Enter the following details:

  *  **Bluetooth Name:** TT4B-XXXX (XXXX indicates the last four digits of the Bluetooth address)
  *  **Bluetooth Password:** 1234

Regulatory Information

The product complies with the following regulations:

• WEEE (Waste Electrical and Electronic Equipment) Directive: This directive applies to customers in the European Union, Europe, Middle East, and Africa (EMEA) regions. For recycling options in  other countries, please contact your local government
• RF Exposure Statement: Maintain a minimum distance of 20cm between the radiator of the device and any part of your body.
• FCC Warning: This device complies with Part 15 of the FCC Rules and should not cause harmful interference or reject any received interference.
• IC Warning: This device contains license-exempt transmitter(s) and should not cause interference or reject any received interference.

Product Certification

• FCC ID: 2AUTE-TT4B2
• IC: 26218-TT4B2
• Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd.

Product specifications

• Product Name: Bluetooth Dongle
• Input: 3.3V 0.5A
• Frequency Range: 2.4GHz-2.483GHz
• Operating Temperature:- 40~105℃

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WEEE(Waste Electrical and Electronic Equipment) Directive
This information only applies to customers in the European Union, according to Directive 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 04 July 2012 on waste electrical and legal systems, and to customers in countries in Europe, the Middle East, and Africa(EMEA) where they have implemented equivalent regulations . For other countries, please contact your local government to investigate the possibility of recycling your product.

RF exposure statement

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1 : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC WARNING

This device contains license-exempt transmitter(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC ID: 2AUTE-TT4B2
IC: 26218-TT4B2
Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd. Made in China

Installation

Open the machine shell and locate the motherboard wireless module socket

Bluetooth Setting

• Bluetooth Name : TT4B-XXXX( XXXX indicates the last four digits of Bluetooth
• addressBluetooth Password : 1234

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>