Edvivi EW2625BK Arlo 13 Inch 2 Lights Black and Antique Brass Vanity Light Instruction Manual
- June 12, 2024
- Edvivi
Table of Contents
Edvivi EW2625BK Arlo 13 Inch 2 Lights Black and Antique Brass Vanity
Light
Product Information
- Model: EW2625BK/ EW2634BKAB/ EW2641BN/ EW2725BK/ EW2734BKAB/ EW2741BN/ EW2825BK/ EW2834BKAB/ EW2841BN
- Customer Service Number: 832-478-8866
- Customer Service Email: WeCareWeFix@gmail.com
- Manufacturer’s Warning: Improper installation may cause electrical shock, fire, or equipment damage. The person performing the installation must be familiar with the construction and operation of the product and associated hazards.
- Important Safety Instructions:
- Please read through all the instructions carefully and completely before beginning assembly and installation.
- This product must be installed in accordance with installation instructions and all safety and building codes.
- It is strongly suggested that all direct wired fixtures be installed by a licensed electrician.
- Be sure the electricity to the wires you are working on is shut off; either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
- This product can expose you to chemicals including lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Product Usage Instructions
- Wire Connection Diagram:
- A. Existing Electrical Box
- B. Crossbar
- C. Crossbar Screws
- D. Ground Wire
- E. Canopy
- F. Wire
- G. Junction Caps
- Attach the crossbar (B) to the existing electrical box (A) using the two crossbar screws (C) which are not supplied and should already be in your box.
- Pass the main wire (F) and ground wire (D) through the canopy (E) and the crossbar (B) until the end of the main wire (F) reaches the electrical box (A) where you can wire using electrician connections. Be sure to use electrician approved junction caps (G) when connecting the wires.
- Stow the excess wire in the electrical box (A).
- Raise the canopy (E), attach it to the ceiling, and hold it in place.
Note: Some parts may be pre-installed or pre-assembled.
Part List and Assembly Illustration:
- 1 Light Bulb (Not included)
- 3 E26
- (1)*4PC
- (2)*4PC
- (3)*2PC
- (4)*1PC
- (5)*1PC
MOUNTING AND WIRING
WARNING:
Improper installation may cause electrical shock, fire, or equipment damage.
The person performing the installation must be familiar with the construction
and operation of the product and associated hazards
Please proceed in an alphabetical order:
- A. Existing Electrical BOX
- B. Crossbar
- C. Crossbar Screws
- D. Ground Wire
- E. Canopy
- F. Wire
- G. Junction Caps
Attach the crossbar(B)to the existing electrician box(A) using the two crossbar screws(C)which are not supplied and should aired in your box. Pass the main wire(F)and ground wire(D)through the canopy(E)and the crossbar(B)until the end of the main wire(F)reaches the electrical box (A)where you can wire use electrician connections. Be sure when connecting the wire use electrician approved junction caps(G).stow the excess wire in the electrician box(A).raise the canopy(E),attach canopy(E)to ceiling, and hold the canopy(E).
installation instructions
Model: EW2625BK/ EW2634BKAB/ EW2641BN/ EW2725BK/ EW2734BKAB/ EW2741BN/ EW2825BK/ EW2834BKAB/ EW2841BN
- Customer Service Number: 832-478-8866
- Customer Service Email: WeCareWeFix@gmail.com
Please include your name, contact methods, product name, and model number in the email.
IMPORTANT SAFETY INSTRUCTIONS:
- Please read through all the instructions carefully and completely before beginning assembly and installation
- This product must be installed in accordance with installation instructions and all safety and building codes. It is strongly suggested that all direct wired fixtures be installed by a licensed electrician
- Be sure the electricity to the wires you are working on is shut off; either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock
EW2625BK/ EW2634BKAB/ EW2641BN 
EW2725BK/ EW2734BKAB/ EW2741BN 
EW2825BK/
EW2834BKAB/ EW2841BN.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
PART LIST AND ASSEMBLY ILLUSTRATION
- Note: Some parts may be pre-installed or pre-assembled.
ASSEMBLING, INSTALLATION, AND MOUNTING
EW2625BK/
EW2634BKAB/ EW2641BN 
EW2725BK/ EW2734BKAB/ EW2741BN 
EW2825BK/ EW2834BKAB/ EW2841BN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>