Edvivi EW6315BK Abigail 1-Light Matte Black Indoor Wall Sconce Installation Guide
- October 30, 2023
- Edvivi
Table of Contents
lnstallation lnstructions
Manufacturer Part Number: EW6315BK
IMPORTANT SAFETY INSTRUCTIONS:
Please read through all the instructions carefully and completely before
beginning assembly and installation
This product must be installed in accordance with installation instructions
and all safety and building codes. It is strongly suggested that all direct
wired fixtures be installed by a licensed electrician
Be sure the electricity to the wires you are working on is shut off; either
the fuse is removed or the circuit breaker is turned off. Turning the power
off using the light switch is not sufficient to prevent electrical shock
WARNING: This product can expose you to chemicals including lead,which is
known to the State of California to cause cancer or birth defects or other
reproductive harm. For more infomation go to
www.P65Warnings.ca.gov
PART LIST AND ASSEMBLY ILLUSTRATION
Note: Some parts may be pre-installed or pre-assembled.
ASSEMBLING, INSTALLATION, AND MOUNTING
MOUNTING AND WIRING
WARNING: Improper installation may cause electrical shock, fire, or equipment damage. The person performing the installation must be familiar with the construction and operation of the product and associated hazards
Please proceed in an alphabetical order:
- A.Existing EIextricaI BOX B.Crossbar C.Crossbar Screws
- D.Ground Wire E.Backplate F.Wire G.Junction Caps attach the crossbar(B)to the existing eIectricaI box(A) using the two crossbar screws(C)which are not suppIied and shouId aIready in your box.
- Pass the main wire(F)and ground wire(D)through the Backplate(E)and the crossbar(B)untiI the end of the main wire(F)reaches the eIectricaI box (A)where you can wire use eIectrician connections.Be sure when connecting the wire use eIectrician approved junction caps(G).stow the excess wire in the eIectricaI box(A).raise the Backplate(E),attach Backplate(E)to ceiIing,and hoId the Backplate(E).
Customer Service Number: (832) 478-8866
Customer Service Email: [email protected]
Please include your name, contact methods, product name, and model number in
the email.