CANOPIA Palma 10 ft. x 16 ft. Carport Kit Instruction Manual

: June 12, 2024
: CANOPIA

Table of Contents

Palma 10 ft. x 16 ft. Carport Kit
WE ARE HERE TO HELP
TOOLS & EQUIPMENT
SITE PREPARATION & FOUNDATION
SAFETY ADVICE
CARE & MAINTENANCE
BEFORE ASSEMBLY
IMPORTANT!
DURING ASSEMBLY
IMPORTANT ASSEMBLY STEPS
Contents
10 YEAR LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOW TO
ASSEMBLE
PALMA” 10×17 / 3X5

CANOPIA Palma 10 ft. x 16 ft. Carport Kit

Palma 10 ft. x 16 ft. Carport Kit

IMPORTANT!
Please read these instructions carefully before starting assembly.
Keep these instructions in a safe place for future reference.

www.canopia.com
Amember of Palram Industries Ltd.

HAVE A CONCERN ?
WE CAN HELP.| You didn’t find what you
were looking for?
We can help at
canopia.shop/support.| Still can’t find what you are looking for?
Please see next page for local customer care.
---|---|---
Before returning your purchase:

WE ARE HERE TO HELP

For general questions: canopia.com/contact-us

https://canopia.shop/contact_us

NORWAY « SWEDEN « ARGENTINA « GREECE « GREENLAND « ICELAND « ESTONIA « JAPAN « LATVIA « LITHUANIA
MAURITIUS « MEXICO « ROMANIA « RUSSIA « TURKEY « UZBEKISTAN « UKRAINE « SWAZILAND « KOREA
+972-4-848-6816 | customer.service@palram.com

USA| CANADA| HUNGARY « SLOVAKIA|
---|---|---
877-627-8476
| generalsupport@poly-tex.com| 905-5646007
| sales@footprintproducts.com| +420-493-523-523
| servis@garland.cz
UNITED KINGDOM « IRELAND| GERMANY| NEW ZEALAND
01302-380775
| customer.serviceUK@palram.com| 0180-522-8778
| customer.serviceDE@palram.com| 0800800880
| customer.service@palram.com
FRANCE « BELGIUM| ISRAEL| DENMARK
+33-169-791-094
| customer.serviceFR@palram.com| 04-848-6800
| customer.service@palram.com| 07-575 4270
| post@nshnordic.com
ITALY « NETHERLANDS « PORTUGAL « SPAIN| AUSTRIA « LUXEMBURG « LIECHTENSTEIN| SOUTH AFRICA
+33-169-791-094
| customer.serviceFR@palram.com| +49-180-522-8778
| customer.serviceDE@palram.com| 011-397-7771
| receptionza@palram.com
AUSTRALIA| AUSTRALIA – GREENHOUSES| CROATIA « SLOVENIA
03-9219-4444
| salesvic@palram.com| 03-9544-6-999
| info@mazedistribution.com.au| 0599-37-057
| info@ms-viscom.com
CZECH REPUBLIC| SWITZERLAND| POLAND
0493-523-523
| servis@garland.cz| 062-287-33-77
| info@ritter.ch| Infolinia: 801-011-929
| 22-349-93-36
kontakt@ogrodosfera.pl
CYPRUS| FINLAND
0224-97113
| alpaco@alpacodomica.com
|www.alpacodomica.com| Neuvonta: 09-6866720 Tuki / Varaosat: 050-3715350
www.horisontenterprises.fi
tuki@horisontenterprises.fi

TOOLS & EQUIPMENT

CANOPIA Palma 10 ft. x 16 ft. Carport Kit - Fig 1

SITE PREPARATION & FOUNDATION

A – PREPARE THE SITE
The product must be positioned and fixed on a flat level surface.

– Clear the site
– Level the ground

B – CHOOSE YOUR FOUNDATION TYPE
Option (1) : Concrete / Wooden surface CANOPIA Palma 10 ft. x 16 ft. Carport
Kit - Fig 4 The screws and masonry anchors supplied with the kit are suitable for concrete fixing only.
Please consult with an expert regarding which fasteners are suitable for other surfaces types (not supplied).

B- CHOOSE YOUR FOUNDATION TYPE

Dig holes into the ground and fill with concrete.
For frozen areas, please check the required depth needed for these holes.

Option (2) : Paving stones CANOPIA Palma 10 ft. x 16 ft. Carport Kit -
Fig 5

Option (3) Solid ground | Asphalt CANOPIA Palma 10 ft. x 16 ft. Carport
Kit - Fig 6

C- DIMENSIONS
The lllustration describes center-to-center distance between poles. CANOPIA Palma 10 ft. x 16 ft. Carport Kit - Fig 7

SAFETY ADVICE

It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps
Always wear work gloves during panel siding
Always wear shoes and safety goggles when working with extruded aluminium
if using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
Do not touch overhead power cables with the aluminium profiles
Do not dimb or stand on the roof.
Keep children away from the assembly area
Do not attempt to assemble the product in windy or wet conditions
Dispose of all lastic bags Keep them out of reach of small hildren
Do ot ean against or push the products during construction
Do not position your praduct in an area expased to excessive winds.
Do not attempt to assemble this product ifyou are tired. have taken drugs or alcahol or i you are prone to dizzy spells
Make sure there are no hidden pipes or cables in the ground before anchoring to foundation
This product is designed to be used mainly as a carport.
Heavy snow load on the roof can make it unsafe to stand below or nearby.
Keep roof and gutters clear of snow, dirt & leaves,
Make sure to anchor the product directly to a solid foundation to increase the product’s stability and wind resistance, especially in areas with severe weather conditions.

CARE & MAINTENANCE

When your product needs to be cleared, use a mild detergent solution and rinse with cold clean water.
DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels.
Clean the product once assembly is complete:

BEFORE ASSEMBLY

Selecting a site:
Choose your ite carefully before beginning assembly.
Choose a sunny position away from overhanging trees,
The product must be positioned and fixed on a flat evel surface
The product must be secured directly to 2 solid foundation
Take all components & parts out of the packages. Sort the parts and check against the content parts list.
Parts should be laid out dlose at hand. Keep all small parts (screws etc) in a bow so they do not get lost.
Please note multi-sided profiles are used in this product. As a result some holes in the profiles are not used during assembly
Please review entire instructions before starting, Carry out the assembly steps in exact order
Please consult your local authorities if any permits are required prior to constructing the product.
Use only the parts registered in the content list, some parts may be surplus.

IMPORTANT!

Firmly connect the product o a level surface immediately after completion of the assembly.
Anchoring this product to the ground is essentia o is stabilty and rigidity. It is required to complete this stage in order for your warranty to be valid
During assembly use a soft surface below the parts to avoid sratches and damages
We recommend checking for restrictions or covenants for builing this product in your area In addition we advise to checkif you need to submit any forms orifany permit is required prior to buiding the product.

DURING ASSEMBLY

During assembly, you will encounter different icons for different products.
Please see below for more information:

| You may use silcone lubricant spray on the frame in order to help you slide the panels into the profiles. Do not spray the panels.
---|---
| Use a rubber mallet if necessary.
| All panels with the stamped words “THIS SIDE OUT” must be facing out o create full UV protection
Remove plastic sticker as panels are locked in place.
| Steps marked with dashed outlines refer to Extensions only.
Some of the steps are irrelevant for an assembly of a single product.
When assembling 2 single or an extended product some parts may be surplus.
| These 2 icons below indicate If screw’s tightening is required or not Temporary tightening ofa few screws may be needed to prevent a profile from sliding out.
Tighten all screws once assembly is completed.

IMPORTANT ASSEMBLY STEPS

When encountering this information icon during assembly,

please refer the relevant assembly step for important additional comments.

Step 5:| According to the desired drainage direction, please select the preferred side to place the shorter legs.
Please verify both legs are mounted on the same side.
---|---
Step 6:| Note the parts’ direction and placement in the corners.
Make sure the diagonals are identical in size.
Step 19:| Perform gradually in accordance with the previous steps.
Step 25:| Level the poles with the foot-pads on to the flat surface, and then attach to the surface of your choosing using accordant screws and anchors.

10 YEAR LIMITED WARRANTY

PALRAM – CANOPIA | 10 YEAR LIMITED WARRANTY
Palram Canopia Ltd. (Company number: 512106824) whose registered office is at Teradion Industrial Park, M.P Misgav 2017400, Israel (*Canopia”) warrants that the product will be free from defects in material or workmanship for a period 0f 10 years from the original date of purchase.

This warranty s valid only f the product is installed. handled, cleaned and maintained in accordance with Canopia’s written specifications.
This warranty does not cover defects resulting from normal wear and tear including, but not limited to: damage caused by use of force, incorrect handing, inappropriate:
use. negligence, accidents, impact from foreign objects, vandalism, pollutants, alteration, painting, damage resulting from
cleaning with incompatible detergents or minor deviations of the product.
This warranty does not apply to damage resulting from “acts of Nature’, which includes but is not limited to hail storm, tornado, hurricane, blizzard, flood, of fire.
Upon submitting proof of purchase and evidence of the claimed product failure, and subject to reporting the failure in writing within 30 days after discovery of the defect, Canopia, at is sole discretion, will replace defective parts of the Product, or refund you a prorated portion of the purchase price on a straight-line depreciated basis for the length of the warranty.

Palram Canopia Ltd.
Teradion Industrial Park, M.P Misgav 2017400, P.0O.B 53, Israel
Tel +972.4.848.6900 | Fax +972.4.848.6901
canopia@palram.com | www.canopia.com

Declaration of Performance
According to Construction Products Council Directive UE N°305/2011 and EN 14963:2006
Issue Date 01/01/2022

Identification code: Palma™ 5000, refer to CE label no 039
Type: A light transmitting self-supporting Twin-wall PC roofing structure with upstand made of aluminum and galvanized steel elements
Intended use: open multi-purpose covering where the ground slope is less then 5%
Manufacturer: Palram Canopia Ltd. Teradion Industrial Park, M.P Misgav 2017400, P.0.B. 53, Israel
Importer and EU representative PALRAM Applications UK, Unit 40 J3 Industrial Estate Carr Hill, Doncaster DN4 8DE
Assessment and verification of constancy of performance: System 3
Declared performance:
Resistance to upward load: UL 600
Resistance to downward loads: DL 1000
Reaction to fire: B, 51, dO
For mountlng and ﬁ><|ng prowsmns see EN 16153:2013
Re5|stance to fire: NPD
External fire performance : FROOF
Watertightness.
For the rooflight with upstand: Pass
For the sheet material: Pass
Impact resistance:
For the small hard body: Pass
For the large soft body: Pass
Thermal transmittance:
For the rooflight: NPD (not relevant to an open multi purpose cover)
Forthe sheet material: 3.60 W/l(m2.K)
Direct airborne sound insulation NPD (not relevant to an open multi purpose cover)
Radiation transmittance:
– Light transmittance: Tv – 4146%
– Solar direct transmittance: Te – 43.6%
– Solar factor: g value – 0.58
Air permeability:
For the rooflight: NPD (not relevant to an open multi purpose cover)
For the sheet material: Pass
Durability (of the sheet material): AA, Cu1, Ku1
The performance of the product identified in points 1and 2 is in conformity with the declared performance in point 7.
This declaration of performance is issued, in accordance with Annex ZA.2.2 – EN 14963:2006, under the sole responsibility of Palram Canopia Ltd.
ITT reports and Factory Production Control records are available upon request at www.canopia.com