niceboy HIVE AURA 4 ANC Wireless Headphones User Manual
- June 12, 2024
- niceboy
Table of Contents
HIVE AURA 4 ANC
User Manual / Wireless Headphones
PACKAGE CONTENTS
Travel case
Wireless headphones
USB-C charging cable
AUX cable jack (3.5 mm)
Airplane adapter
Instructions for Use
PRODUCT DESCRIPTION
- ANC switch
- Increase volume / Next track
- Multifunctional button
- Decrease volume / Previously played track
- 3.5 mm jack AUX port
- Microphone
- Operational LED indicator
- Charging LED indicator
- USB-C charging input slot
CHARGING
We recommend fully charging the headphones before their first use to maximize the battery’s lifespan. The speaker takes approximately 3 hours to fully charge. Low battery is announced by an audible signal. To charge the headphones, connect the enclosed USB-C cable to the char ging port (9) and connect to any charging adapter (voltage 5V and output current minimum of 1A) or to a USB port on your PC. Charging is signalled by the LED indicator (8) shining red, the diode will shine blue when charging is complete.
POWER ON THE HEADPHONES AND CONNECT TO BLUETOOTH
- Press and hold the multifunctional button (3) until the operational LED indicator (7) begins to flash blue-red and you hear the audio signal. The headphones are now in pairing mode.
- Activate Bluetooth on your device and select “Niceboy HIVE Aura 4 ANC” from the list of available devices. Your device will connect to the headphones. Successful pairing is announced by an audio signal and the operational LED indicator (7) will begin to shine red.
Note: The headphones will automatically connect to the device with which
they were last paired.
In an effort to extend battery life, the headphones will automatically power
off after 5 minutes of the connection to your device being lost or not being
connected to another device.
POWERING OFF THE HEADPHONES
Press and hold the multifunctional button (3) for approx. 3 seconds to power
off the headphones. An audio signal will sound and the LED indicator (7) will
shine red once before shutting off.
ANC FUNCTION
Press switch (1) to activate the ANC function (Active Noise Cancelling). The operational diode (7) will shine green while the ANC mode is active. This function may also be activated in the event that the headphones are powered off and you are playing music via the audio cable.
MUSIC CONTROLS
Play/pause: press the multifunctional button. (3)
Next track: press and hold the “+” button. (2)
Previous track: press and hold the “-” button. (4)
Increase volume: press the “+” button. (2)
Decrease volume: press the “-” button. (4)
TELEPHONE CALLS
Press the multifunctional button to accept and end calls. You may decline a
call by pressing the multifunctional button for approx. 2 seconds.
SIRI AND GOOGLE ASSISTANT
You may activate voice assistance while in standby mode or when listing to music by pressing the multifunctional button (3) twice.
CONNECTING TO THE APP
- Download the app by scanning the QR code using your mobile phone, or search for „Niceboy ION“ in the mobile app store and download the app.
- Start the „Niceboy ION“ app and sign up with a new account or use your existing account.
- After setting the password, go to the next step „Add device“.
- Switch on Bluetooth; nearby devices will be found based on the strength of the signal.
- Press the „+“ button
- Wait for the prompt „Connection“
- Adding the device successful: „completed“ is displayed
- Your device is successfully connected.
Note: Prior to pairing to any new device, it is necessary to reset the earphones to the factory settings each time when you wish to connect the earphones to the Niceboy ION app on the new device.
FACTORY SETTINGS
In case of technical problems, reset the earphones to the factory settings as follows.
- Switch off the earphones, remove them from the paired devices list and turn off Bluetooth.
- Switch on the earphones so that they are in pairing mode. The LED flashes alternately blue and red.
- Briefly press the multifunction button (3) twice.
- Immediately long press the same button to turn off the headphones.
- After turning the headphones back on, the process is complete.
SPECIFICATIONS
BT version: | 5.2 |
---|---|
Frequency band: | 2.4GHz |
Radio frequency power: | ≤ 2,5mW |
Supported BT profiles: | A2DP, AVRCP, HFP |
Supported codecs: | AAC, SBC |
Frequency: | 20Hz – 20kHz |
Sensitivity: | 97+/-3dB |
Playback time: | up to 60 hours (at 50% volume) |
Playback time with ANC: | up to 30 hours (at 50% volume) |
Range: | 10 m |
Speaker: | 40 mm |
Time to charge: | 2 – 3 hours |
SAFETY INFORMATION
Listening to music at excessive volume can damage your hearing. Do not subject
the equipment to fluids and moisture. Do not expose the device to excessively
high/low temperatures, and do not attempt to disassemble it. Protect the
device from sharp objects and falls from height. Batteries – Improper handling
(prolonged charging, short circuit, breakage by other objects, etc.) may
result in fire, overheating or battery leakage. The battery or accumulator
that may be included with the product has a life of six months because it is a
consumable item.
Information on all frequency bands in which the radio equipment operates and
intentionally transmits radio waves as well as the maximum radio frequency
power transmitted in the frequency band in which the radio equipment is
operated is included in the instructions and safety information.
The manual may be downloaded in its electronic form at www.niceboy.eu under
the support section. NICEBOY s.r.o. hereby declares that the type of radio
equipment Niceboy HIVE AURA 4 ANC complies with Directives 2014/53 / EU,
2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU
Declaration of Conformity is available on the following websites:
https://niceboy.eu/en/declaration/hive-aura-4-anc
USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME
USE)
This symbol located on a product or in the product’s original documentation
means that the used electrical or electronic products may not be disposed
together with the communal waste. In order to dispose of these products
correctly, take them to a designated collection site, where they will be
accepted for free. By disposing of a product in this way, you are helping to
protect precious natural resources and helping to prevent any potential
negative impacts on the environment and human health, which could be the
result of incorrect waste disposal. You may receive more detailed information
from your local authority or nearest collection site. According to national
regulations, fines may also be given out to anyone who disposes of this type
of waste incorrectly.
User information for disposing electrical and electronic devices (business and corporate use) In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.
MANUFACTURER:
NICEBOY s.r.o., 5. kvetna 1746/22, Nusle, 140 00,
Praha 4, Czech Republic, ID: 294 16 876.
Made in China.
References
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>