Incommonwith Luca Wall Mount Artist Edition Instruction Manual
- June 12, 2024
- Incommonwith
Table of Contents
Incommonwith Luca Wall Mount Artist Edition
Product Information
Luca Wall Mount, Artist Edition
The Luca Wall Mount, Artist Edition is a stylish and contemporary lighting fixture designed to enhance the ambiance of any space. It features a durable backplate (Part A) for secure installation, Wago Clips (Part B) for easy wiring connections, and a Luca Artist Fixture (Part G) that adds an artistic touch to your walls or ceilings. The fixture comes with two light bulbs (Part D) and all the necessary screws and tools for installation.
Product Usage Instructions
-
Step 1: Before starting the installation process, ensure that you turn off the electrical power at the main fuse box or circuit panel.
-
Step 2: Use a Phillips head screwdriver to mount the backplate (Part A) to the junction box. Tighten the mounting screws (Part E) securely.
-
Step 3: Connect the fixture’s wires to the corresponding wires from the junction box using the Wago Clips (Part B). The white wire is neutral, the black wire is live, and the green/yellow wire is ground. Strip 3/8 of the insulation from
each wire if needed before inserting them into the Wago Clips. One ground wire should be attached to the backplate (Part A), and the other ground wire should come from the junction box. -
Step 4: Align the holes of the backplate (Part A) with the holes of the canopy cover attached to the fixture (PartG). Secure the set screws (Part F) by tightening them using the included L-shaped hex key (Part C).
-
Step 5: Screw in the included light bulbs (Part D) gently into the sockets of the fixture (Part G).
Note: If you encounter any issues or have any missing components, please reach out to us for assistance.
How to Install Your New Light
Please check that you received all of the components pictured in this guide.
Reach out to us if anything is missing. It’s very rare, but it happens. Don’t
forget to turn off the electrical power source.
Tools you will need that aren’t included: standard wire stripper, Phillips
head screwdriver.
CAUTION
Electrical shock risk. Turn off electrical power at the main fuse box or
circuit panel before beginning installation, servicing the light, or
installing accessories. We recommend working with a qualified electrician
familiar with the type of work you’d like done.
Contents
Installation
- Step 1: Turn off electrical power at the main fuse box or circuit panel before beginning installation.
- Step 2: Mount the backplate (A) to the junction box using a phillips head screwdriver to tighten the mounting screws (E).
- Step 3: Use the wago clips (B) to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/ Yellow is ground. One ground wire will be attached to the backplate (A), the other ground wire should come from the junction box. If needed use a wire stripper to remove 3/8” of the insulation from each wire before inserting them into the corresponding wago clip.
- Step 4: Align the holes of the backplate with the holes of the canopy cover attached to the fixture (G) and secure the set screws (F) by tightening using the included L-shaped hex key (C).
- Step 5: Gently screw in the included lightbulbs (D) into the sockets of the fixture (G).