Incommonwith Helena Table Lamp Instruction Manual
- June 12, 2024
- Incommonwith
Table of Contents
Incommonwith Helena Table Lamp
Helena Table Lamp
The Helena Table Lamp is a stylish and functional lighting fixture that adds a touch of elegance to any room. It comes with all the necessary components for easy installation and is designed with safety in mind.
Product Information
- Part A: Power Cord
- Part B: Bulb (x5)
- Part C: Set Screws (x2)
- Part D: Hex Key
- Part E: Helena Table Shade
- Part F: Helena Table Base
The lamp features a polarized plug with two flat prongs and a circular prong for added safety. Please make sure to check that you have received all the components before proceeding with the installation. If anything is missing, contact us for assistance.
CAUTION: If the plug does not fit easily into the outlet, do not force it. Contact a qualified electrician for assistance.
Product Usage Instructions
- Step 1: Feed the cord from the shade (E) through the floor lamp base (F) and align the shade with the base connector.
- Step 2: Insert the set screws (C) using the provided hex key (D).
- Step 3: Gently screw in the included lightbulbs (B) into the fixture sockets of the lamp shade.
- Step 4: Carefully tilt the table lamp to its side. Connect the wire from the shade to the power cord and twist to secure. Once connected, gently tilt the lamp and slide the quick connect under the base of the lamp.
- Step 5: Plug in the table lamp.
- Step 6: Spin the finial on the top of the Helena table shade (E) to turn on the fixture and control brightness.
How to Install Your New Light
Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.
You won’t need any additional tools.
CAUTION
As a safety feature, this lamp has a polarized plug to reduce the risk of
electric shock. This means it has two flat prongs and a third circular prong
underneath, and it will fit in an outlet one way only. If the plug does not
fit fully and easily into the outlet, do not force it; contact a qualified
electrician.
Contents
Instruction
Step 1: Feed the cord from the shade (E) through the floor lamp base (F) Align the shade with the base connector.
Step 2: Insert set screws (C) using hex key provided (D).
Step 3: Gently screw in the included lightbulbs (B) into the fixture sockets of the lamp shade.
Step 4: Carefully tilt the table lamp to it’s side. Connect the wire from the shade to the power cord. Twist to secure. Once connected, gently tilt the lamp and slide the quick connect under the base of the lamp.
Step 5: Plug-in the table lamp.
Step 6: Spin the finial on the top of the Helena table shade (E) to turn on the fixture and control brightness