Zhongshan Haibang Lighting Appliance 19416 The Fan Lights Instructions
- June 5, 2024
- Zhongshan Haibang Lighting Appliance
Table of Contents
Zhongshan Haibang Lighting Appliance 19416 The Fan Lights
Product Introduction
This product uses 2.4G wireless digital remote control technology, remote control one-to-one control, simple and convenient operation, and strong anti- interference ability.
Technical Parameters[
](https://manuals.plus/wp-content/uploads/2022/07/Zhongshan-Haibang-
Lighting-Appliance-19416-The-Fan-Lights-FIG-1.png)
- Wall switch segment sequence: All bright/white light/yellow light
- Input voltage： 200V-240V AC50Hz
- Power factor： ˃0.9
- Output voltage： 90-200VDC
- LED Output Power： 25-60W
- Motor rated power： <25W
- Controller efficiency： >84%
- Wind velocity： 1-6 gears
- Timing： 1 hour / 2 hours
- Receiving method: RF2.4G
- Remote control distance: 8-20 meters
- Remote control battery: Number 7 1.5V X2
- Remote control matching code
Turn on the power and press and hold the light switch button for a long time within 5 seconds of the light on, When you hear a beep or a light flashes, the code match is successful.If you need to match the code a second time, you need to wait 30 seconds before turning on the power and repeat the above operation.
CAUTION: The electronic switch is not an isolated product and needs to be operated by professional personnel during installation. The electronic switch is triggered by the remote control, and the wireless frequency of the remote control transmitter is 2.4GHz.
FCC Statment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with, the limits for a Class B digital device, pursuant to Part 15 of the FCC] Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,] there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
FCC ID: 2A7GS-19416