BLACK WIDOW ATVRB-ALUM Aluminum Rear ATV or Trailer Box Instruction Manual
- June 12, 2024
- BLACK WIDOW
Table of Contents
BLACK WIDOW ATVRB-ALUM Aluminum Rear ATV or Trailer Box
GENERAL GUIDELINES & SAFETY
- It is the user’s responsibility to read and follow all instructions.
- Keep these instructions with the product at all times and review before each use.
- It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product.
- Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and free of defects.
- Never modify this product in any way.
- All circumstances cannot be addressed in these instructions .
- Please use common sense and practice general safety measures when using this product.
- Parts and/or instructions are subject to change without notice.
- This box is designed to work with a variety of ATV tube racks. It is the user’s responsibility to ensure the box is suitable for their ATV and the box is properly installed.
- Make sure all parts are properly assembled and firmly tightened before use. When on the trails, periodically check to make sure the box is securely attached. Re-tighten mounting hardware, if necessary.
- Always properly tie down cargo. While traveling, periodically check to make sure cargo is secure.
- Evenly distribute cargo inside the box.
- Use caution and reduce speed when driving on rough terrain.
- As with ANY ATV or trailer mounted accessory, check for tightness BEFORE each ride; excessive vibration will cause nuts and bolts to loosen over time.
- If mounting to an A-Frame trailer tongue, appropriate bolts, washers, and lock nuts must be used (not included).
- The use of power tools requires safety glasses.
PARTS
TOOLS (NOT INCLUDED)
Tools Required:
Power Drill, 5/16 drill bit, 7/16 wrench , Felt Marker Safety Glasses
Step 1. Place and center toolbox on the rear rack. Check for clearance
from the seat.
Step 2. Carefully mark the drilling locations for your rack or trailer.
Step 3. Drill holes, install hardware and secure
PRODUCT WARRANTY & LIABILITY
GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained. This product warranty is effective for the period of time stated below, unless otherwise stated in the product instructions or depicted in the product advertisement. All Authorized Dealer warranties are NON-TRANSFERABLE and cover only the original end purchaser. This limited warranty does not cover products purchased through non-authorized dealers. Non-authorized dealer receipts are not accepted for warranty verification.
**WARRANTY CLAIMS MUST BE MADE DIRECTLY TO THE ORIGINAL PLACE OF
PURCHASE.
**
WARRANTY PERIOD: This warranty remains in force for one year from the
date of the product’s accepted delivery. The Authorized Dealer offers a one
year manufacturer’s warranty for most products unless otherwise specified on
the product advertisement.
WARRANTY SERVICE : The Authorized Dealer will replace any defective or
malfunctioning part at no charge, including payment of the shipping costs of
parts or replacement product to and from the manufacturer. The purchaser is
responsible for labor charges. If the product does not meet specifications as
depicted in the advertisement, the Authorized Dealer will refund the full
purchase price of the product.
Questions regarding the warranty on a specific product and warranty claims
should be directed to the Authorized Dealer with whom the purchase transaction
was made.
WARRANTY LIMITATIONS: The above warranty does not apply to products that
are repaired, modified or altered by any party other than the Authorized
Dealer; are subjected to unusual physical stress or conditions (such as
overloaded ramps or corrosion), natural disaster, governmental actions, wars,
strikes, labor disputes, riots, theft, vandalism, terrorism or any reason
beyond reasonable control; are damaged due to improper installation, misuse,
abuse, accident or negligence in use, storage, transportation or handling, or
tampering; or to products that are considered consumable items or items
requiring repair or replacement due to normal wear and tear.
Product should be inspected prior to signing for delivery. Product damage
incurred during shipping, unless noted on the Bill of Lading at the time of
delivery, renders this warranty void.
LIMITED LIABILITY: In no event shall THE AUTHORIZED DEALER be liable
to the purchaser or any third party for any indirect, incidental,
consequential, special, exemplary or punitive damages arising out of the use
of the product, including, without limitation, property damage, loss of value
of the product or any third party products that are used in or with the
product, or loss of use of the product or any third party products that are
used in or with the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>