DMI DMTGWPWMBTCC Swift Bluetooth Adapter Instruction Manual
- June 12, 2024
- DMI
Table of Contents
DMI DMTGWPWMBTCC Swift Bluetooth Adapter
Product Information
The SWIFT Bluetooth Adapter is a component that can be pasted to an asset to detect its acceleration information and transmit it to the server through Bluetooth-based access to the network. It is designed for indoor use only. The product features a switch on its rear side, which must be turned ON before pasting it to any asset. Inside the product, there is a coin cell with a parameter of 3V and 70mAh capacity. It is important not to inject any water or liquid into the product intentionally to prevent damage. To ensure the longevity of the product, avoid punching or crashing it with hard objects. Using the equipment in a manner not specified by the manufacturer may result in damage to the equipment and its protective features.
The SWIFT Bluetooth Adapter complies with Part 15 of the FCC Rules, ensuring that it does not cause harmful interference and accepts any interference received. However, any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.
Product Usage Instructions
- Ensure that the switch on the rear side of the product is turned ON before pasting it to any asset.
- Avoid intentionally injecting water or liquid into the product, as it may cause damage.
- Avoid punching or crashing the product with hard objects to prevent any damage.
- Only use the product indoors.
- Follow FCC guidelines for reorienting or relocating the receiving antenna if necessary.
- If experiencing interference, increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a different circuit than the receiver’s circuit.
- For any assistance or further information, contact DMI LLC at nathan@precisionreality.com or call 563-587-8778.
Please keep reading the following safety notes before use or examination.
Product Description
- This product is a component that can be pasted to an asset and detect its acceleration information to the server through Bluetooth-based access to the network.
FOR INDOOR USE ONLY
Warning
- There is a switch on the rear side of the product, please ensure the switch is ON before pasting it to any asset.
- There is a coin cell (parameter 3V, 70mAh) inside of the product, please do not intentionally inject any water or liquid into the product to avoid any damage.
- Please do not intentionally punch or crash it with hard things to avoid any damage.
- If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be damaged.
FCC Warning statements
- FCC Supplier’s Declaration of Conformity
- Product Name： SWIFT BLUETOOTH ADAPTER
- Model number: SWIFT; DMTGWPWMBTCC
- Suppliers Name: DMI LLC
- Suppliers Address (USA): 140 E 9th Street, Dubuque, IA 52001, United States
- Suppliers Website: www.precisionreality.com
- Contact Email/Telephone: nathan@precisionreality.com / 563-587-8778
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and the receiver.
- connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>