SVAVO V-880D Automatic Spray Dispenser User Manual

AUTOMATIC SPRAY DISPENSER
(MODEL V-880D)
USER MANUAL

Specification & Accessories

Accessories|
---|---
Unit Name| Automatic Spray Dispenser
Unit Size| L3.39W3.27H9.37inch
Unit Weight| 0.881b(400g)
Material| ABS+PP
Battery| 2*AA Batteries(Not Included)
Working Current| 500mA
Rated Voltage| DC3V

Button Function

Applicable Refill Can:

Available Brands of Refill Can:
Air Wick, Glade, Time Mist
Applicable Volume of Refill Can:
5oz～10oz（142ml～300ml）
Applicable Sizes of Refill Can:
Φ ≤2.55inch (6.5cm)
H ≤6.1inch (15.5cm)

How to Use

I Install Batteries
Open the front cover and install 2*AA batteries correctly. Do not install the refill can during this step.

• Factory Default Setting: Spray every 15 minutes, 00:00-24:00, from Monday to Sunday.
  Ⅱ Set Start and Stop time
  Press Power button. When ON appears on the LCD screen, press MODE for 2 seconds to entering setting.
  Set Start Time: Press MODE button. When START appears on the LCD screen, press HOUR and MIN to set starting time.
  Set Stop Time: Press MODE button again. When STOP appears on the LCD screen, press HOUR and MIN to set stopping time.
• Note: Long press HOUR / MIN button to speed up.
  Ⅵ Set Current Time:
  Press MODE button. When CLOCK appears on the LCD screen, press HOUR and MIN buttons to set the current time. Press WEEK button to set the current day of the week.
  Note:1.2.3.4.5.6.7 represents in sequence from Monday to Sunday.
  For example, 1 is Monday,2 is Tuesday.
  Ⅶ Exit Setup Mode, Battery Replacement Reminder and Reset
  Exit Setting: After Clock setting is completed, press MODE button to exit quickly or wait for 5 seconds without any operation to exit setting mode automatically.
  Battery Reminder: The battery icon（ ）on the LCD screen indicates power level. When the battery box （ ）appears, it reminds that there is no power and the dispenser will stop working.
• When there is no power supply, the previous setting will be maintained for 60 seconds, and the factory default settings will be restored if more than 60 seconds.
  Reset: Press RESET button to directly reset to Factory Default Setting.
  Ⅷ Install Refill Can & Test Spray
  Refill Can Installation: Slide the refill can’s neck into the metal bracket until a “Bang” sound is heard, which indicates correct installation.
  Note: Make sure the lever is pushed up before installing refill can.
  Spray Test: Make sure the nozzle is away from your face then press the test button, the dispenser will spray and green light will flash once.
  After testing completed, close the front cover.
  Warning: Please keep your face away from the spray nozzle to avoid spraying into your eyes and causing your discomfort.

Installation & Maintenance

Note: Please take out refill can before wall mount installation.

Wall mount Installation:

1. It is recommended to install the dispenser 6.5-8.2ft above the floor.
2. Open the front cover to mark the mounting hole on the wall.
3. Drill holes at the marks, install the plastic plugs, drive part of the screw into the plug and reserve 0.16inch space to mount the dispenser.
4. Hang up the dispenser on the wall.

Routine Maintenance:

1. Please use a damp cloth to clean the outside.
2. Please use a dry cloth to clean the inside. Do not drip water into the inside.
3. Please take out batteries and refill can when under a prolonged unused time and keep the cover closed.

Safety Precautions

Attention
Install the dispenser in a dry place where it cannot be exposed to sun or strong light for a long time.
Do not rinse directly with water to avoid any damage to the dispenser.
Please take out batteries and refill can when under a prolonged unused time to avoid damage to the dispenser.

Warning
Please keep the spray dispenser away from children.
Please keep the spray dispenser away from food.
Please keep the spray dispenser away from your face when it’s working.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>