Carrier RMAP-ST Air Purifier User Guide

Carrier RMAP-ST Air Purifier

Note

This guide is for quick reference only. Please see the User Manual for complete product information and operational instructions.

CAUTION

• Be sure to unplug the unit before removing the filter packaging.
• Remove the plastic packaging from the filter before use.
• Keep plastic packaging away from children as it may cause suffocation.

How to Prepare/Change the Filter

1. Hold the top cover of the product with both hands and pull up. Remove any tape used to secure unit during transit.
   

2. Grasp the filter cover hole on the rear and pull cover out and then up to remove and access filter.
   

3. Remove the filter from the product and then remove the plastic packaging from the filter.
   ► Failing to remove the packaging will result in abnormal sounds and the filter will not work properly; and it may cause a fire or other damage to the product.
   

4. Slide the filter back into the unit with tabs on filter facing outward.

5. Replace filter cover.
   ► Insert the cover into the fixed groove at the bottom of the product.
   ► Slide the cover forward so that the cover fits into the top grooves.
   

6. Hold the top cover of the product with both hands and slide it back in place, making sure the logo appears in the front.
   

7. Place purifier in desired location and plug into wall outlet.

8. For filter replacement:
   When the filter installation is complete, press the +”Auto” button on the control panel for five seconds or more to reset the filter indicator light.
   ► The red filter light will turn off when the product is reset.

Display

Control Panel

Control Panel Descriptions

| Sleep mode / Timer
---|---
| LED ON/OFF & Wi-Fi® connection (LED off cycle lasts 6 hours)
| Decrease the timer and fan speed setting value
| Increase the timer and fan speed setting value

Auto

| Smart Auto mode
| Power ON/OFF

Normal Operation

Note

When the air purifier turns on, the sensor is initialized and the display shows during initialization.

1. Press the button to turn on.
   ► The previously selected operation mode will be displayed.

2. Press the button on the control panel to select your desired fan speed.
   ► You can adjust the fan speed from level 1 (F1) to level 18 (F18).
   Note: The default home display on Wi-Fi® models will show a PM2.5 reading. Once the button is pushed, the display will switch to show designated fan speed.
   

Note

Refer to the User Manual and the Carrier Home app for complete set up instructions for the Smart Air Purifier models.

How to Install Casters (Optional)

1. Inside of the air purifier package, there is a small box containing four casters and eight screws.
2. Remove the four bottom bases from the air purifier with a screw driver.
3. Replace each base with a caster, utilizing two screws per caster.
4. Retain the removed bottom bases and screws for future use.

Note

If there is no caster box inside the product box, please contact customer service at 1-888-320-0909.

Customer Support

Air Purifier Models
RMAP-ST | RMAP-XL

Smart Air Purifier Models
RMAP-SST | RMAP-SXL

carrierathome.com
1-888-320-0909

©2022 Carrier. All Rights Reserved.

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations. Third-party trademarks and Third-party trademarks and logos are the property of their respective owners.

01-811-20535-01
10/2022

References

• Carrier @ Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>