Zambelis LIGHTS 180031-D LED Pendant Light Installation Guide

Zambelis LIGHTS 180031-D LED Pendant Light

Please read the instructions before commencing installation and retain for future reference.

PRODUCT SPECIFICATIONS

• Fitting: Aluminium+Arcylic
• Lamp type: LED 98W 3000K
• Protection against electric shock: CLASS I, requires earth connection
• Ingress Protection: IP20. Protection against entry of solid objects greater than 12mm in diameter
• Quality/Corrosive rating: QC21: Burning period: 12hrs/24hr cycle
• Commercial use, indoor mainly – painted or plated metals
• Not for use in corrosive environments

PRODUCT INSTALLATION INSTRUCTIONS

WARNING: Electrical products can cause death, injury, or damage to property. Installation of this product must be carried out by a qualified electrician.

1. Ensure mains supply is switched off.
2. Insert masonry plugs into mounting surface.
3. Fit mounting bracket onto mounting surface with self-tapping screws.
4. Connect main supply wires to terminal block making sure all connections are tight.
5. Fit ceiling cup onto the mounting bracket with screws.
6. Reconnect power.

NOTE: This product is not for outdoor use or in wet conditions. The IP20 rating indicates protection against solid objects greater than 12mm in diameter and no protection against water.

To install the LED pendant light, follow the below steps:

1. Turn off the mains supply.
2. Insert masonry plugs into the mounting surface where the light fixture will be installed.
3. Attach the mounting bracket to the mounting surface using self-tapping screws.
4. Connect the main supply wires (brown – live, blue – neutral, green/yellow – earth) to the terminal block. Ensure all connections are tight.
5. Attach the ceiling cup to the mounting bracket using screws.
6. Turn on the mains supply.

NOTE: It is important to hire a qualified electrician for installation to avoid any risk of injury or damage to property. The product is not suitable for outdoor use or in wet conditions. The IP20 rating indicates that it is protected against solid objects greater than 12mm in diameter but does not provide any protection against water.

SPECIFICATIONS

• Fitting: Aluminium+Arcylic
• Lamp type: LED 98W 3000K.
• Protection against electric shock: CLASS I,. Requires earth connection.
• Ingress Protection: IP20. Protection against entry of solid objects greater than 12mm in diameter.
• Quality/Corrosive rating: QC21: Burning period: 12hrs/24hr cycle. Commercial use, indoor mainly – painted or plated metals.
  • Not for use in corrosive environments.

INSTALLATION INSTRUCTIONS

Electrical products can cause death, injury, or damage to property. Installation of this product must be carried out by a qualified electrician.

• Ensure mains supply is switched off.
• Insert masonry plugs (1) into mounting surface.
• Fit mounting bracket onto mounting surface with self-tapping screws (2).
• Connect main supply wires to terminal block (3) making sure all connections are tight.
• Fit ceiling cup onto mounting bracket with screws (4).
• Reconnect power.

WARNING

• Not for outdoor use or in wet conditions.

Connecting the Terminal Block

• Connect main supply (brown – live, blue – neutral, green/yellow – earth) into terminal block making sure all connections are tight.

Symbols

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>