YI GONG BC1043 Alloy Engineering Remote Control Car Instruction Manual

YI GONG BC1043 Alloy Engineering Remote Control Car

Preface

Thank you for purchasing our product. Please read this manual carefully before use and retain it for future reference.

Product Configuration

Major Parts Of The EXCAVATOR

1. Excavators arm
2. Track-Type Wheels
3. Simulation Control Deck
4. Battery compartment

Battery Installation And Use

Remote Control Rattery Installation
Unscrew counter clockwise to open the battery compartment cover, install 2X1.5″AA” batteries (batteries not included) into the battery compartment accroding to the given polarity, screw clockwise to close the battery compartment.

Excavator Battery Installation

Making sure that the power swich is in the OFF position, remove the screw form the battery cover and remove the battery compartment cover.insert the power connector of the 3.7V rechargeable battery into the power connector of the excavator battery compartment, screw clockwise to close the battery compartment.

WARNING:
Remove the battery if the Excavator is not going to be used for a long time

Excavator Battery Charging
Insert the power connector of the battery into the USB charging cable, and then connect the USB charging cable to the adapter or the USB port on the computer. When charging is peooeeding, the red light keeps solid on,when charging is finished, the red light is off. The charging time is about 3-4 hours.

• Please check whether the adapter input voltage is consistent with the current voltage before charging:
• The output voltage of the adapter should be consistent with the battery voltage;
• When charging, it must be done under adult supervision;
• Keep away from flammable materials when charging, and have an adult watch over when charging.

Operation Demonstration

After using the product, please wipe the surface stains with a dry cloth to avoid damage to the components and prolong the service life of the product.

Important Notices

Note! The products are manufactured by batches after performances have been strictly demonstrated and practically tested to verify meeting safety standards.For any use of the remote-controlled model,the manufacturer or dealer won’t bear any responsibility for accidents resulting from abnormal parts usage and wearing, improper assembling or operation under usafe environment. Please be sure to operate this product under safe environment.

• Dont play in dangerous places such as public roads, select a safe place for operating to avoid dangerous
• Dont use this product on elevated places such as tables or counters, and avoid falling or heavy falls
• Don’t place this product in direct sunlight or high temperature places to avoid deformation or even damage caused by sun exposure and hich temperatune.
• Don’t play on rainy days or water (mud) pits. Prevent being wetted by water, so as not to cause malfunction, if you accidentally get wet, please use a cloth with good water absorption to absorb the water.
• Be careful not to touch the wheels with fingers, hair, clothes, etc., to avoid injury.
• When the battery of the rie car or the remote control is low, the speed of the remote control car will slow down significantly. Please replace the battery or charge i& in time.
• Please do not violently move the excavator digging arm by hand to avoid damage to the excavator.
• Don’t break the remote control antenna to prevent injury.
• Maintenance: wipe the surface stains with a dry cloth.

NOTE
The hydraulic rods and crawlers of this product are easy to damage and fall off. If the parts are damaged or lost, you can purchase the same model parts from the manufacturer or dealer, and replace and install them yourself to ensure the complete structure of the product. Do not use parts of different models or different brands for installation to ensure the structural safety of the product.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

Troubleshooting

Note: The surrounding electromagnetic wave interference may cause the Excavator to malfunction, you can restart the remote control car to operate again.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>