Bravy 201A Baby Walker Instruction Manual
- June 1, 2024
- Bravy
Table of Contents
Bravy 201A Baby Walker
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This product is manufactured per the requirements of the Directive 2001/95 / EC “General Product Safety”, of the European Standards EN 1273:2020“Child care articles. Baby walking frames. Safety requirement and test methods” and the National Consumer Protection Act.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING!
- Never leave the child unattended.
- The child will be able to reach further and move rapidly when in the baby’s walking frame. Ensure a safe environment for the child when using the product.
- Prevent access to stairs, steps and uneven surfaces.
- Guard all fires, heating and cooking appliances.
- Remove hot liquids, electrical cables and other potential hazards from reach.
- Prevent collisions with glass in doors, windows and furniture
- This product is intended only for a child who can sit up by himself until he can walk by himself or weighs more than 12 kg.
- This baby walking frame should be used only for short periods (e.g., 20 minutes).
- Do not use the product if any components are broken or missing.
- Do not use accessories or replacement parts other than those approved by the manufacturer.
- Use the product only for its intended purpose. The walker is not a toy, do not allow other children to push it and play with it while your child is in it.
- Do not make changes, improvements or modifications to the construction, because this may risk the safety of your child. If a problem arises during the use and operation of the product, contact an authorized repair shop or the sales agent you bought the high chair from for consultation or repairs.
ASSEMBLY INSTRUCTIONS
IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only. Follow exactly the instructions and sequence for assembling and operating the product. Check the securing of the fixation after each operation. Fixing a certain position in most cases is accompanied by a clicking sound.
COMPONENTS – FIGURE 1
PARTS
- Soft upholstery seat;
- Baby walker’s body;
- Frame connecting the body to the base of the walkerм
- The base of the walker;
- Wheels;
- Music board with toys.
PRODUCT ASSEMBLY
Strictly follow the instructions and sequence for assembling the product as
shown in the diagrams from 1 to 5.
- Unfold the walker (figure 1). Position the walker at the desired height, then lock it as shown in Figure 1a.
- Attach the seat to the walker, as you insert the clamps in the corresponding openings. Tighten with a screw (figure 2).
- Put the music toy board into the groove on the upper tray. The soundboard is correctly positioned when you hear a clicking sound.
- Place front and back wheels under the walker’s base, as shown in Figure 4. Place the stoppers on the walker’s basis (figure 4). You don’t need any tools to secure them.
IMPORTANT INFORMATION FOR THE BATTERIES – FIGURE 5:
Find the battery compartment cover. Use a screwdriver to loosen the cap
screws. Take it off. Insert 2 1.5 V type AA batteries (not included),
observing the polarity marked on the bottom of the compartment. Put the
battery cover back on and tighten the screws with a screwdriver. Do not over-
tighten. Always use 2*1.5V “AA” batteries.
WARNING!
- Only an adult should handle the batteries.
- Keep children away from batteries. NEVER allow children to play with or charge the battery.
- Always use new batteries.
- If you are not going to use the product for a long time, remove the batteries.
- Remove used batteries from the product and dispose of them in the designated areas, not in household waste containers.
- Do not dispose of batteries in a fire as there is a risk of explosion or leakage.
- Non-rechargeable batteries are not to be recharged.
- Use only the type of battery recommended by the manufacturer.
- Different types of batteries are not to be mixed.
- New and used batteries are not to be mixed.
- Batteries are to be inserted with the correct polarity.
- Do not place the battery or adapter for another product. This may result in overheating, fire or explosion.
- Keep the adapter away from children.
- Before you start charging the product you must check whether the adapter, battery and cables are in good working order. If there is damage on any of these parts, you must stop using them, until the damage is removed.
- Do not let the battery discharge entirely. You must recharge it after each use or once a month if you are not going to use it regularly.
- Protect the environment by not disposing of this product in household waste containers (2002/96 / EU). Check the recommendations of local authorities.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Regularly check the condition of main parts and fastening elements for damages or breakage. Do not repair the product yourself, but contact an authorized service centre or the sales agent from whom you purchased the product. Otherwise, your warranty will be void. Periodically clean the product. The plastic parts must be cleaned with wet soft cloth. The fabric of the walker must be cleaned with warm water and soft soap. After cleaning leave the walker to dry well before using it. Do not leave the product to the harmful effects of external factors – direct sunlight, rain, snow or wind. This can damage metal and plastic parts and bleach upholstery. Store the product in a dry and ventilated place, not in dusty, damp rooms with very low or very high room temperatures.
Manufactured for Moni in PRC Manufacturer and Importer: Moni Trade Ltd. Address: Bulgaria, Sofia, Trebich, 1 Dolo Str., Phone number: 003592/936 07 90, Website: www.moni.bg
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>