JAMARA 461819 Audi E-Tron Sportback Instructions
- June 12, 2024
- JAMARA
Table of Contents
JAMARA 461819 Audi E-Tron Sportback
Product Information
- Product Name: Audi E-Tron Sportback
- Model Variants:
- No. 461819 – white
- No. 461820 – red
- No. 461821 – black
- Manufacturer: Jamara e.K.
Product Usage Instructions
The customer is solely responsible for the correct operation and proper use of the product. This includes:
- Assembly: Follow the provided assembly instructions to correctly assemble the product.
- Charging: Ensure the correct charging process is followed as described in the user manual.
- Usage: Use the product according to the provided guidelines and limitations.
- Application Area: Choose the appropriate area for using the product, considering safety and suitability.
Please read and familiarize yourself with the operating and user manual, as it contains crucial information and warnings.
Important Safety Information:
- GB – Suitable for children over 3 years.
- Warning: Not suitable for children under 36 months. RISK OF
SUFFOCATION!
General information
JAMARA e.K. is not liable for any damage caused to the product itself or
through this, provided this is due to improper operation or handling errors.
The Customer alone bears the full responsibility for the proper use and
handling, including without limitation, the assembly, the charging process,
the use and choice of the operation area. Please refer to the operating and
user instructions, it contains important information and warnings. Suitable
for children over 3 years.
Warning: Not suitable for children under 36 months. RISK OF SUFFOCATION!
Contains small parts which can be swallowed. Keep away necessarily from
children Due to its top speed this toy is not suitable for children under 3
years!
- Before playing, remove all protective films from all parts
- This product is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge.
- Depending on development, a minimum age of 4 years could be appropriate
- Maximum weight: < 25 kg
Before assembly
- Adult required for assembly. Keep children away while assembling.
- Tools (not included) needed for assembly: screwdriver.
- Read the complete instructions and security instructions carefully before using the model.
- To prevent accidents and injuries, DO NOT leave your Child unattended during operation of the vehicle. Never let your Child out of your sight while the driving a vehicle.
- DO NOT use the vehicle on public roads or places or other dangerous locations. ONLY operate the Ride On Car in places such as private parking, private land or other safe locations. Make sure that no person or animal is endangered.
- The model stops after releasing the accelerator, independently on a horizontal surface. The vehicle has no brake or parking brake. Do not operate the vehicle uphill or downhill, and secure it when parking.
DANGER
- For safe driving, you should make sure that your Child understand and adheres to the following rules:
- Always sit tight, do not get up during the ride.
- Never take additional Children for a ride. (The vehicle is only suitable for 1 person)
- Hold tight.
- Never drive without shoes.
- Never drive in the dark.
- To be used with protective equipment.
- Keep hands, hair, loose clothing and any other item away from any rotating parts.
- The Model should not be used in rooms or halls with high humidity, in the rain or on wet surfaces. Risk of malfunction or damage to electronics and housing.
- The model is not water- or splash-proof. Only operate on asphalted surfaces (such as paving stones). The model is not suitable to be operated in grass or loose soil.
Attention!
Keep the not mounted kit away from small children as it contains swallowable
parts. It must be assembled or checked by adult to make sure the car is
assembled on the right way before playing.
Only use in direct supervision of an adult!
To control the vehicle a minimum skill level and caution is needed. Make sure
you are familiar with the operation of the model and its characteristics. The
model is heavy. This is an increased risk of injury and damage in the event of
loss of control. Avoid any kind of intentional or unintentional collisions
with objects or hazards to persons.
Box content
- Model
- Transmitter 2,4 GHz
- Battery pack
- Charger
- Assembly tool
- Instructions
PARTS
- Vehicle body
- Wheel
- Wheel cover
- Steering wheel
- Seat
- Windshield
- Rearview mirror
- Washer
- Nut
- Charger
- Remote control
- Spanner
- Instruction
INSTALLATION
Only use with 12V 500mAh charger, Ord. No. 413380
-
Assembly of the front wheels
Place the body with the underside facing up. Remove the nuts and the washer from the front axle. To mount the front wheels, slide a washer onto the front axle. Put a wheel on the axle and slide another washer onto it. Fix the whole thing with a nut and finally put on a wheel cover. -
Assembly of the rear wheels
Remove the nuts and the washer from the rear axle using the spanner. Slide a drive wheel and a washer onto the rear axle. Secure it with a nut. Now put the wheel cover on the wheel. Repeat on the other side. -
Mounting the Steering Wheel
Connect the cable from the steering wheel to the cable on the dashboard. Install the steering wheel (3) in the intended position until they click into place. -
Windshield assembly
Align the windshield with the corresponding openings on the car body, insert and push them into place. -
Battery connection
Connect all connectors as shown. Only connect plug connections that fit into each other and take care not to reverse polarity. Make sure that the red cable and the black cable are connected to the respective connectors of the same colour. Check the power supply by pressing the ON/OFF switch on the model. If the power supply is working, you will hear a motor noise. -
Assembling the seat
First remove the two screws at the front of the seat position. Slide the two pins at the rear of the seat into position in the body and secure the seat with two screws. -
Assembling the mirrors
Push the rear view mirrors into the intended position until they click into place. -
Charging your vehicle
- The power swich must be turned in OFF position when charging.
- The charging port is under the seat.
- Insert the charger into the socket – the LED lights up green. Connect the charger to the charging socket.
- The LED on your charger lights up red as long as the battery is being charged. If the LED lights green again, the battery is fully charged.
- The charge time is 6 hours.
- When the vehicle begins to run slowly, recharge the battery.
- Do not charge the battery more than once within 24 hours.
- Charger and battery heat up during the charging process.
Warning!
- The charger is not a toy. Only use the charger supplied.
- The battery may only be charged by or under the supervision of an adult.
- The terminals must not be short-circuited.
- The charger must be checked regularly for damage to the cable, plug, housing and other parts. If any damage is found, the charger must not be used until the damage has been repaired.
- Let the model cool off sufficiently after each use before putting it back into operation. When using an additional batteries let it cool off for minimum 15 minutes until the model is operated again. Overheating can damage the electronics or may result in fire.
- Always disconnect the model from the charger immediately after charging. Always disconnect the charger from the power supply immediately after disconnecting the model. Inserting the rechargeable model or charger after charging will result in damage tothe model, charger or the power supply (fire hazard).
- Only use the charger in dry rooms.
Functions
-
Soundboard
-
ON/OFF switch With the ON/OFF switch you start the vehicle.
-
Light button
-
Speed
High speed – Change the speed of the car more quickly.
Low speed – Change the speed of the car more slowly -
Shift Lever:
-
Forward: Press the “Forward-backward switch” on the “Forward” position.
Press the “Foot pedal”, the model drives forward -
Stop: The model will brake automatically, when your child’s foot remove from the “Foot pedal”. Press the “Forward-backward switch” in the middle.
-
Reverse: Press the “Forward-backward switch” on the “Backward” position.
Press the “Foot pedal”, the model drives backward.
Important! The vehicle must be stationary before changing direction or speed. Otherwise the gear unit and/or the motor could be damaged.
-
Soundboard
-
USB
-
Micro SD
After inserting a Micro SD card or USB stick, the soundboard starts playing the tracks one after the other. Only files with the extension .mp3 can be played back. -
Aux
Connect MP3 device / mobile. -
Music/V-
Press = previous, long press = Volume down -
Pause & play
-
Music/V+
Press = Next, long press = Volume up -
Sound
-
Voltage display
Attention! Your vehicle displays the total voltage of the two batteries in volts immediately after switching on. The fully charged batteries will usually display a total voltage of approx.
12.6 – 13 volts unloaded. The display is load dependent. This means that the displayed voltage will drop under load. If a voltage of less than approx. 11.8V is displayed in the unloaded state, you should switch off the Ride-on and charge the battery (see charging procedure). Otherwise the battery may be deeply discharged and irretrievably damaged. Otherwise, the battery may become deeply discharged and be irretrievably destroyed. A completely discharged battery is not covered by the warranty and must be replaced at the owner‘s expense.
Functions transmitter
- Forward
- Backward
- Speed
- Power LED
- Left
- Brake
- Right
- Battery compartment
Fitting the transmitter batteries
Open the battery compartment cover on the back of the transmitter and put 2
AAA batteries making sure that it is corectly put in. Then close the
cover.
Battery warning:
- Non-rechargeable batteries are not to be recharged!
- Do not open!
- Do not dispose of in fire!
- Do not mix old and new batteries!
- Do not mix alkaline batteries, standard (carbon-zinc) or rechargeable batteries!
- Rechargeable batteries are to be removed from the toy before being charged!
- Rechargeable batteries are only to be charged under adult supervision!
- The supply terminals are not to be short-circuited!
Binding transmitter and model
If the model does not respond to the transmitter, press the for-wards (1) and
backwards (2) buttons for about 3 sec until the Power LED (4) flashes. Now
switch on the model, the Power LED is lit continuously.If this does not work,
repeat the process.
Caution
Always switch off the model immediately after each use. Immediately after each
use the battery should be disconnected from the model. The battery can be
deeply discharged by leaving it switched on accidentally or leaving it plugged
in. Deep discharge causes the bat-tery to lose power or can be damaged to such
an extent that charging or discharging is no longer possible or the battery
can self-ignite during charging or discharging (fire hazard). Ne-ver attempt
to charge or discharge deeply discharged batteries. The battery voltage should
never fall below 11,9 volts to avoid deep discharge. The fully charged battery
has a voltage of approx. 13 Volt. After use, the intact battery should be
fully charged immediately after a cooling phase of at least 10 minutes but at
the latest after 12 hours to avoid subsequent deep discharge by self-
discharge. If the battery is not used or stored for a longer period of time,
the battery should be checked for voltage (min. 12,3 volts) or damage at least
every 3 months and charged or disposed of if necessary.
Problem/Solution
Problem | Source | Solution |
---|---|---|
The battery can no longer be charged | Carger or battery defective. | Check |
charger and battery
The battery can no longer be charged although the battery and charger are OK.|
Charging socket defective| Check or replace the charging socket.
The journey time is very short.| The battery has been deep discharged or is
worn out.| Use a new battery and avoid deep discharge.
No function| Battery is not or incorrectly connected.| Connect the battery
(see instructions)
ON/OFF switch defective.| Check or replace switch.
Can be switched on but does not drive.| Motor cable incorrectly connected or
not connected.| Check and connect motor cable (see instructions).
Can be switched on but does notmove, or only direction.| Gas or direction
switch defective.| Check or replace switch.
Can be switched on but only travels in one direction| Directional switch
defective.| Check or replace switch.
The active fuse blows and switches the unit off for a few seconds. You will
hear a single click at the beginning
| Oberload or electrical short circuit.| Do not overload or have the until
checked.
Vehicle does not respond to remote control| Not bound.| Carry out the binding
process (see instructions).
No sound function on the steering wheel/andlebar| the cable was torn or
crushed during assembly.| Check or replace the steering wheel.
Vehicle has very high wear on switches.| Dirt and moisture damage the
switches.| Do not drive in moisture or dirt such as meadows, gavel, sand, etc.
The rubber tyres come loose on the wheels| Ridden on too hot a surface or in
dirt.| Change tyres and avoid hot surfaces and dirt.
You can find further solutions to problems on the Internet in our FAQ at:
Spare parts
-
Battery
No. 412620 12V 4,5Ah -
Light button
No. 412865 -
Charger
No. 413380 12V 500mAh -
Steering wheel
No. 413432 -
Steering column
No. 413435 -
Transmission incl. motor
No. 413438 -
Accelerator switch
No. 412760 -
Switch forward/reverse
No. 412866 -
Windshield
No. 413430 -
Wheels
No. 413433 -
Rear axle
No. 413436 -
Receiver electronics
No. 413439 -
On/Off switch
No. 412864 -
High/low switch
No. 413206 -
Rearview mirror
No. 413431 -
Wheel caps
No. 413434 -
Steering linkage
No. 413437 -
Transmitter
No. 413440
Disposal restrictions
Batteries and accumulators must not be disposed of in domestic waste. You are obliged to dispose of batteries (seperate collection) appropriately. After use you can return batteries free of charge to the retail store. As batteries contain substances that can be irritant, can cause allergy and are highly reactive, separate collections and proper recycling is important to the environment and to your health. If the batteries are marked with a chemical symbol Hg, Cd or Pb below the crossed-out waste bin on wheels it refers to that more than 0.0005% of mercury (Hg), more than 0.002% of cadmium (Cd) or more than 0.004% Lead (Pb) is included.
Service center
Reitter Modellbau Versand
Patricia Reitter
Degerfeldstrasse 11
DE-72461 Albstadt
Tel + 49 (0) 7432 9802700
Fax + 49 (0) 7432 2009594
Mail info@modellbauversand.de
Web www.modellbauversand.de
JAMARA e.K.
Manuel Natterer
Am Lauerbühl 5 DE-88317 Aichstetten
Tel + 49 (0) 7565 9412-0
Fax + 49 (0) 7565 9412-23
Mail info@jamara.com
Web www.jamara.com
Janus Trade D.O.O.
Distributor Jamara for Slovenia
Koroška cesta 53c
SI-4000 Kranj
Mail info@janustrade.si
Web www.janustrade.si
Nettrade Kft.
Distributor Jamara for Hungary 1033 Budapest, Hévízi út 3/b
Tel +36 30 664 3835
Mail
ugyfelszolgalat@kreativjatek.hu
Mooser T-Trade
Thomas Mooser
Bürgermeister-Koch-Str. 32a DE-82178 Puchheim
Tel + 49 (0) 89 1792 9867
Fax + 49 (0) 89 1792 9869
Mail info@mooser-t-trade.de
Web www.mooser-t-trade.de
PenTec s.r.o.
Distributor Jamara for Czech Republic and Slovakia
Veleslavínská 30/19 CZ-162 00 Praha 6
Tel +420 235 364 664
Mobil +420 739 075 380
Mail servis@topdrony.cz
Web www.topdrony.cz
Viva-net d.o.o.
Distributor Jamara for Croatia
Ante Topic – Mimare 8
HR-10000 Zagreb-Susedgrad
Mail info@viva-net.hr
Web www.viva-net.hr
JAMARA e.K.
Inh. Manuel Natterer
Am Lauerbühl 5 – DE-88317 Aichstetten
Tel. +49 (0) 75 65/94 12-0 –
Fax +49 (0) 75 65/94 12-23
info@jamara.com
www.jamara.com
Service –
Tel. +49 (0) 75 65/94 12-777
service@jamara.com
References
- jamara.com
- Naslovnica - Net.hr
- t-trade.de is available for purchase - Sedo.com
- jamara.com
- Janus Trade
- Reitter Modellbau & Robotics - Zubehör, Ersatzteile, Bausätze
- Mooser T-Trade: Dein neuer Lieblings-Online-Shop für Plastik Modellbau
- FAQ - Fragen und Antworten
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>