Kimex 012-1027 Fixed TV Wall Mount Instruction Manual
- June 12, 2024
- Kimex
Table of Contents
Kimex 012-1027 Fixed TV Wall Mount
Product Information
- Model: Manuel d’installation / Instruction manual V1
- Part Number: 012-1027
- VESA Compatibility: 200×200, 300×300, 400×200, 400×400, 600×400
- Weight Capacity: 40kg (88lbs)
- Mount Type: Flat/Curved
- Mounting Holes: A (x1), B (x2)
- Screw Types: M-A (x4), M-B (x4), M-C (x4), M-D (x4)
- Screw Sizes: M6x30, M8x30
- VESA Washer Types: W-A (x4), W-C (x4)
- VESA Washer Sizes: ST6.3×55, D6
- Additional Components: D8, W-B, ST6.3×55
Product Usage Instructions
- Identify the VESA size of your display and ensure it is compatible with the mount (200×200, 300×300, 400×200, 400×400, or 600×400).
- Check the weight of your display and ensure it does not exceed the weight capacity of the mount (40kg or 88lbs).
- Attach the mounting holes A and B on the mount to the corresponding holes on your display using the provided screws M-A,M-B, M-C, and M-D.
- Use the appropriate screw size (M6x30 or M8x30) depending on the thickness of your display.
- If required, use the VESA washers W-A and W-C to ensure a secure fit between the mount and your display.
- Additional components such as D8, W-B, and ST6.3×55 may be needed depending on the specific installation requirements.
- Ensure all screws are tightened securely to prevent any movement or instability of the display.
INSTRUCTIONS
NOTE : Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION
Use with products heavier than the rated weights indicated may result in
instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only.
- Using this product outdoors could lead to product failure and personal injury.
IMPORTANT
Ensure that you have received all parts according to the component checklist
prior to installation. If any parts are missing or faulty, contact your place
of purchase for a replacement.
MAINTENANCE
Check that the product is secure and safe to use at regular intervals (at
least every three months).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>