PELI 3415M Z0 Right Angle Light Instruction Manual

: June 12, 2024
: PELI

Table of Contents

PELI 3415M Z0 Right Angle Light
Battery Installation / Replacement
General Operation
Documents / Resources

PELI 3415M Z0 Right Angle Light

Battery Installation / Replacement

Ensure that the tail cap lock is set in the ‘Unlock’ position.
Twist the tail cap counter-clockwise until it stops and pull the tail cap away from the body.
Remove and discard the battery insert
Insert 3 AA batteries in the direction indicated (T4 – Energizer™ E91, Philips™ LR6, Panasonic™ LR6 or Peli™ P-NiMH-AA; T3 – NX-Power LR6).
Replace tail cap, turn clockwise until it aligns with the body. For added security, turn the tail cap lock to the ‘Lock’ position with the lanyard attachment.
Replicate process for battery replacement. Refer to http://www.peli.com/eu/en/support/flashlightbattery- safety/ for complete text of Battery Safety warning for this Torch.

General Operation

Modes: Spot and Flood, Flood Only, Spot Only, Flashing

Spot and Flood : Press once.
Flood only : Press twice (within 0.5 second).
Spot only : Press three times (within 1 second)
Flashing : Press and hold the on/off switch for three seconds from any mode.
Off : From any operating position, press and release once.

The small LED in the switch indicates the battery status when the torch is turned on:

Green = 61% – 100%
Amber = 21% – 60%
Red =< 20%

Declaration of Conformity

Declaration No.003415-3180-003E
We, Peli Products, S.L.U. c/ Provença, 388, Planta 7 08025 Barcelona Spain Declare under our sole responsibility that the following apparatus:
Product Description: LED handheld torch
Model Type: PELI™ 3415MZ0
Brand: Peli™
Is in conformity with the following EU legislation: ATEX Directive 2014/34/EU Based on the following harmonized standards: EN60079-0:2018, EN60079-11:2012, EN60079-28:2015

The following Notified Body has been involved in the conformity assessment process:

Notified Body: INTERTEK TESTING CERTIFICATION LTD Intertek House, Cleeve Road Leatherhead, Surrey KT22 7SB, United Kingdom
Notified Body No.: 0359
Role: Issue of ATEX EU Type Examination Certificate
Certificate No.: ITS17ATEX201830X
ATEX Coding: ll 1 G Ex ia op is llC T4…T3 Ga
Technical File No.: 34152017

Name and position of person binding the manufacturer or authorized representative:

Signature: Piero Marigo
Name: Piero Marigo
Function: Managing Director
Location: Peli Products, S.L.U. c/ Provença 388, Planta 7 08025 Barcelona Spain
Date: 12 July 2020

Special conditions for safe use:

Only the following battery models are permitted to be used in conjunction with this product
T4 – Panasonic™ LR6, Philips™ LR6 ,Energizer™ E91 and Peli™ P-NiMH-AA
T3 – NX-Power LR6. The cells must be of the same manufacturer.
Do not replace battery cells when an explosive atmosphere is present. Battery cells must be replaced with the correct polarity.

*PELI LIMITED LIFETIME GUARANTEE OF EXCELLENCE**

Peli Products, S.L.U. (“Peli”) guarantees its torches and headlamps for a lifetime against breakage or defects in workmanship. This guarantee does not cover the lamp or batteries. Peli will either repair or replace any defective product, at our sole option. All claims under this guarantee, of any nature, are barred if the product has been altered, damaged or in any way physically changed, or subjected to abuse, misuse, negligence or accident. Lifetime guarantee not applicable where prohibited by law. For complete details, see: www.peli.com/eu/en/support/guarantee-of- excellence/