Ravaglioli AllOnWall Series Wheel Aligners Owner’s Manual

May 15, 2024
Ravaglioli

Ravaglioli AllOnWall Series Wheel Aligners

The High-tech Solution For Wheel Alignment

RAV 3D2.0WALL

Space-saving Design

wheel alignment operations are performed with maximum flexibility and without space occupied by a console, a data transfer tower or a PC

Fully Wireless

the sensors and tablet communicate via Bluetooth connection

Accurate Precision

upgraded 3D measuring heads with HQ resolution

The All On Wall Series allows you to have all that is necessary for performing wheel alignment operations to be placed on a convenient wall- mounted panel, in this way freeing up useful space in the workshop.
All alignment activities can be controlled from a 10” tablet that the operator can carry with him or place on the lifter during adjustment thanks to the built-in magnets.
The aligner boasts a well-tested measuring head technology with HD cameras and Real 3D target that is fully wireless with Bluetooth transmission.

Features Of The 3D Measuring Heads

  • LCD display for primary information
  • Five keys for software navigation, also remote controllable
  • 5MP resolution for measurement and compensation of the lifting platform level
  • Remote control function
  • LED repeaters to assist recording
  • Only one head installation position to measure different wheelbase vehicles
  • Weight 3 kg

Quick connection with pivoting coupling system to prevent damage in case of obstacles while descending.

Battery with quick release system.

The battery charge lasts

8
HOURS to permit extended full day activity.

WHEEL ALIGNERS

3D aligners

  • The charging stations are fitted with magnets so that the batteries can be positioned precisely while always indicating proper charging operation also due to the LED indicator.

Tablet Features

  • Dust-and water resistant (IP52)
  • Resistant to falls up to 76 cm
  • Complete with adhesive magnets
  • Rounded edges to ensure greater sturdiness
  • 64 GB memory
  • Display 800 x 1280
  • Camera front 2 MP + camera rear 5 MP
  • Weighs less than 700 g

Quick And Accurate Measurement

The 3D measuring heads instantly read all vehicle angles with maximum precision

Two Types Of Clamps Available

  • Set of 4 self centring 3-point clamps requiring no compensation.*

  • Set of 4 self centring 4-point clamps.

  • + STDA38K allows you to avoid run out compensation. (Optional for self-centring 4-point clamps)

The 3D targets installed on the clamps are extremely lightweight, maintenance- free and have no electronic comp

Thanks to the Real 3D targets, combined with the supporting 3 and 4-point clamps, the run out compensation procedure can be skipped to speed up the operator’s activity and maximize workshop efficiency.

The iconic Ravaglioli logo comes to life thanks to a LED backlit panel

Compatible with system

INTERNET CONNECTION Sending results to the customers.
Remote assistance.

The four supports of the clamps of the Light models can be also secured to the lift columns to have them near to the vehicles wheels. (Fastening kit of magnets needed – Item no. STDA165).

More efficient workshop in terms of space and operations

  • NO OBSTACLE Maximization of the available workspace.
  • ** RAPID WORK** Fast acquisition of vehicle alignment data.
  • MINIMUM EFFORT Run out compensation not required.
  • NO LIMITS One aligner for multiple working bays.

Light Version

3-point clamps support with handy hook

Console.
Weighs less than 14 kg.

4-point clamps support with handy hooks.

Large Version

  • A Charging stations for two batteries fitted with magnets.
  • B Tablet with 10” 800 x 1280 multi-touch display complete with adhesive magnets. Rechargeable on the panel.
  • C 3D measuring heads storage housing equipped with rubber impact-resistant matting

    3-point clamps with handy hooks fitted with impact resistance rubber.

MODEL OVERVIEW STANDARD EQUIPMENT

| Item no.| Version| Clamps
RAV3D2.0WALL.3L| RAV.3DWAL.701039
RAV.3DWAL.701008 RAV.3DWAL.701053| Large Light Light| 3-point
RAV3D2.0WALL.3S| 3-point
RAV3D2.0WALL.4S| 4-point

Technical Data

  • Large version

  • Light version

| RAV3D2.0 WALL.3L –
RAV3D2.0 WALL.3S
RAV3D2.0 WALL4.S
---|---
Individual toe front/rear axle| +/- 20°
Total toe| +/- 20°
Toe-out on turns| +/- 20°
Camber front/rear axle| +/- 10°
Caster| +/- 18°
SAI| +/- 18°
Set-back| +/- 5°
Set-back front axle| +/- 5°
Geometric centre line| +/- 5°
Thrust angle| +/- 5°
Max. steering angle| +/- 50°
Min. tyre size| 8″
Max. tyre size| 24″
Max. wheel diameter| 910 mm
Max. wheel base| 4500 mm
| | WALL.3L| RAV3D2.0
WALL.3S
| WALL.4S
---|---|---|---|---


| STDA35E/3D Self-centring 3-point clamps with quick locking arms| S| S|
**| STDA33EU/3D 4-point clamps| | | S
**
| STDA38K Set of quick locking arms to upgrade 4-point clamps (4 pieces)| | | O
**| S110A7 Pair of standard turn tables Ø 300 mm| | S| S
**
| STDA124 Pair of premium turn tables HD Ø 360 mm| S| |
**| STDA161 Steering wheel lock| S| S| S
**
| 10479 Brake pedal depressor| S| S| S
**| STDAPREMIUM PREMIUM Token for additional functions| S| S| S
**
| STDA141ADAS Advanced enabling of ADAS functions| O| O| O
**| STDA164 Extra set of 2 batteries| O| O| O
**
| STDA149 Kit of 4 spirit levels for targets| O| O| O
**| STDA Shoot Token for consulting database on-line| O| O| O
**
| TEq-Link Workshop connectivity software| O| O| O
**| STDA110 Vehicle data bank| S| S| S
**
| STDA165 Kit of magnets for clamp support| O| O| O
**| STDA162 Kit of lift mounting brackets (2 pieces)| S| S| S**

CUSTOMER SUPPORT

RAV UK
Vehicle Service Group UK Ltd
3 Fourth Avenue,
Bluebridge Industrial Estate
Halstead, Essex, CO9 2SY
United Kingdom
+44.1787.477711
+44.1787.477720
rav@ravaglioli.com
echnical data and composition presented in this catalogue may vary. Pictures reproduced are only indicative.
Member of VSG – Ve hicle Service Group Company

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals