LED s light 1000428 Solar LED Garden Torch User Manual
- June 12, 2024
- LED s light
Table of Contents
LED s light 1000428 Solar LED Garden Torch User Manual
Safety
General Safety
- Read the manual carefully before use. Keep this manual for future reference.
- Only use the product for its intended purposes.
- Do not use the product for other purposes than described in the manual.
- Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
- This product shall not be used by children without the supervision of an adult. Children shall not play with the device.
- Do not modify the product in any way.
- Do not expose the product to water or moisture. (IP 20)
- Do not immerge the product into water. (IP 44 – IP 67)
- Keep the product away from heat sources.
- Do not block the ventilation openings.
- Do not look directly into the LED lamp.
- Keep a minimum distance of 1 meter between the lamp and the surface being illuminated.
Electrical safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an au- thorised repair agent.
- Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
- Make sure that the cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over
Warning
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Caution, risk of electric shock.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire has to be destroyed.
Features
During the day, the battery of the lamp will charge itself by means of the built in solar panel. This panel converts light into electricity, which is then stored in the battery. As soon as darkness falls, the lamp will automatically turn on. The brighter the light was during the day, the stronger the battery charge will be and the longer the light will shine.
Ideal positioning
- Put the solar lamp in a place where enough light can shine on the solar cell surface. Avoid dark or heavily shaded places.
- For optimal performance, the solar cell should be allowed to charge the battery for at least 8 hours.
- Choose the location of the lamp in such a way that the lamp is not in the direct influence of other light sources, as this will prevent the lamp from turning on after it gets dark.
First use
- Remove all parts from the packaging.
- Mount the lamp housing according the drawing (Fig. 1)
- Press the switch (*) 1x (On) (Fig. 2° )
Problem solving
Should the lamp not automatically switch on after it has become dark outside, please check the following:
- Problem: The battery didn’t fully charge. – solution: Make sure the lamp is placed in the optimal location, where it can collect sufficient light during the day to charge the battery. Without sufficient light conditions (for instance, when the sky is heavily overcast or because of other less then favorable weather conditions] The lamp will start charging again during the next more sunny day and continue it’s normal operation.
- Problem: The solar lamp is placed near a street lantern or other strong light source. Solution: place the lamp in a more favorable location, far enough away from interfering external light sources.
- Problem: There is insufficient direct sunlight. solution: make sure the lamp is placed in a location where it can collect sufficient direct light during the day, not directly next to the house or in the shade of a tree.
- Problem: the on-off, switch is switched off. solution: Turn the switch in the on, position, the lamp should automatically switch on when placed in a dark enough environment. You can test this by taking the lamp into a darkened room.
Attention!
Because of the type of battery, this product is not for winter usage. The
loaded battery can be deactivated and stored in winter frostfree to prevent
the Lithium Ion battery from discharging. Discharge of the Lithium Ion battery
does not give grounds for claims or refunds. Used batteries do not belong in
the garbage.
As end-user, you are responsible for recycling used batteries or for taking
them to a household hazardous waste disposal facility, a universal waste
handler (e.g., storage facility or broker), or an authorized recycling
facility.
Do not dispose of used batteries in fire!
Only use batteries of the same type and technical specifications as the one
that came with the lamp. Make sure you don’t mix old exhausted batteries with
new ones.
Battery included: 1 x 2200 mAh Li-ion – rechargeable.
Specifications | 1000428 |
---|---|
Power (W): | 1,7W |
Battery type (Ni-Mh): | 3,7V – 2.200mAh – 8,14 Wh |
Luminous flux: | 651m |
Colour temperature (K): | 2.200 |
LED-Lifetime: | 20.000 |
Beam angle: | 360° |
Dimensions (mm): | L 600x 0 120 |
Degree of Protection: | IP44 |
Care
Before cleaning the unit, disconnect it, if necessary form other components; do not use aggressive cleaning agents. The unit has been carefully checked for defects. If nevertheless you do have cause for complaint, please go back to the retailer where you have bought the product together with your proof of pur- chase. We are not liable for damage arising from incorrect handling, improper use or wear or tear. We reserve the right to make technical modifications.
Notes on Disposal
The product is designated for separate collection at an appropri- ate collection point. Do not dispose of the product with household waste. For more information, contact the retailer or the local author- ity responsible for waste management.
Documentation
The product has been manufactured and supplied in compliance with all rel-
evant regulations and directives, valid for all member states of the European
Union. The product complies with all applicable specifications and regulations
in the country of sales.
Formal documentation is available upon request. The formal documentation
includes, but is not limited to the Declaration of Conformity, the Material
Safety Data Sheet and the product test report.
CE declaration
This product complies with the following directives:
EMC: 2014/30/
EU RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) can be found here: http://www.shada.nl/uploads/Docs/index.html
Disclaimer
Designs and specifications are subject to change without notice. All logos,
brands and product names are trademarks or registered trademarks or their
respective holders and are hereby recognized as such.
Please visit us online on our website: www.shada.nl For more information about our company and our products,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>