tp-link TL-WR802N Portable Router Installation Guide

: June 9, 2024
: tp-link

Table of Contents

tp-link TL-WR802N Portable Router
Safety Information
Hardware Connection
Configure the Router
Operation Modes
FAQ (Frequently Asked Questions)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link TL-WR802N Portable Router

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/.

TP-Link portable routers are a versatile solution to provide internet connectivity to multiple devices. The router supports five operation modes – Standard Router Mode, Repeater Mode, Client Mode, Access Point, and WISP Client Router. The mode switch on the router can be used to select the desired mode. The Quick Installation Guide provides step-by-step instructions to connect and configure the router.

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Hardware Connection

Connect the hardware as per the diagrams in the user manual. If the router has a mode switch, switch it to the desired mode.

Standard Router Mode
Repeater Mode
Client Mode
Access Point
WISP Client Router

Connect the Hardware
Connect the hardware according to the diagrams in the opening chapter of this guide. If your router has a mode switch, switch it to the mode you need

Configure the Router

Connect your device to the router wirelessly. The SSID (wireless network name) and password are printed on the router’s label.
Launch a web browser and type http://tplinkwifi.net in the address bar. Create a password for future login attempts, or use admin for both username and password for some routers.
Go to Quick Setup and click Next to start.
Follow the step-by-step instructions to complete the initial configuration.

Enjoy the internet!
Note: If you have changed the default SSID and password, you have to reconnect your wireless devices to the new Wi-Fi network.

Operation Modes

Scenario	Operation Mode

The wired network is only limited to one device to connect at a Standard Wireless time, but I want to share the internet with more wireless devices.| Standard Wireless Router
I am in a Wi-Fi dead-zone or a place with weak wireless signal. I want to have a larger range of the wireless signal for a better internet connection throughout my home or office.| Repeater
I have a wired device with an Ethernet port and no wireless capability, for example, a Smart TV, Media Player, or game console. I wish to be able to play it online wirelessly in my home.| Client
I want to access the internet wirelessly, but this place only has an Ethernet port (wired network) available.| Access Point
I want to receive internet access from a wireless internet service provider(WISP), and share the internet with localdevices.| WISP Client Router

FAQ (Frequently Asked Questions)

Q1. How do I recover the router’s web management password or retrieve my Wi-Fi password?
- If you forget the password required to access the router’s web management or your Wi-Fi password, you must restore the router to its factory default settings.
- If you want to retrieve your Wi-Fi password, use a device that is connected to the router (wired or wirelessly) and log in to the router’s managment page, under Wireless > Wireless Security.
Q2. How do I restore the router to its factory default settings?
- With the router powered on, use a pin to press and hold the Reset button for about five seconds, and then release the button.
  Note: Resetting the router will clear all previous configurations.
Q3. What can I do if there is no internet access?
- If using a cable modem, reboot the modem, then wait until its Online LED is solid (ON). Reconnect the cable to the router.
- Set the router to Router Mode according to the instructions. If internet access is still not available after completing the steps above, contact TP-Link Technical Support.
Q4. What can I do if my wireless keeps dropping?
- By default, your wireless channel is set to Auto, which automatically selects the
  least-congested channel between 1 and 11 for best performance, but it may also cause frequent wireless drops. In this case, setting your wireless channel to a fixed one will prevent it from changing, and likely stabilize your network connection.
Q5. What can I do if I can’t access the router’s web management page?
- Set the computer to obtain an IP address automatically.
- Reboot your router and computer, and try again.
Q6. What can I do to maximize my signal strength?
When choosing an ideal location to optimize wireless signal in Repeater mode, please refer to the following recommendations.
- The Best Way is Halfway: Generally, the ideal location for the portable router is halfway between your main router and your Wi-Fi devices. If that is not possible, place the router closer to your main router to ensure stable performance.
- Less Obstacles Ensure Better Performance: Choose a location with less obstacles that may block the signal between the portable router and the main router. An open corridor or a spacious location is ideal.
- Less Interference Provides More Stability: Choose a location away from other bluetooth devices or radioactive devices such as cordless phones, microwaves, to minimize interference.