FRENCH FITNESS FFS-LPS Silver Seated Leg Press Sled Calf Raise Instruction Manual
- June 12, 2024
- FRENCH FITNESS
Table of Contents
FRENCH FITNESS FFS-LPS Silver Seated Leg Press Sled Calf Raise
Product Information
The FFS-LPS / FFB-LPS French Fitness FFS Silver & Black Seated Leg Press Sled / Calf Raise is a commercial fitness equipment designed for leg exercises. It has a sturdy frame and work arm, and it comes with a 10-year parts warranty and 1-year labor warranty.
FEATURES
- Paint Color: Black
- Vinyl Color: Black
- 11 Gauge Steel
- Steel pipe size: 50mm x 100mm x 3mm
- Secondary pipe : 40mm x 80mm x 3mm
- Urethane-covered handles
- Two layers of anti-static powder coating to ensure maximum adhesion and durability
- Standard rubber feet protect base of the frame and prevent the machine from slipping
- Contoured cushions utilize a molded foam for superior comfort and durability
- Grips retained with aluminum collars, preventing them from slipping during use
- 7×19 strand construction, lubricated, nylon-coated cable
- Easy-to-follow instructions illustrate proper use and muscles trained
- 4-1/2″ (11 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
- Standard rear shrouds
- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings
- 7/16″ (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss
- Movement Style: Sleigh (Seat slides, the leg press plate is fixed)
- California Residents see Prop 65 WARNINGS
TECH SPECS
- Weight Stack: 396.8 lbs (180 kg)
- Weight Stack to Pulley Ratio: 1:1
- Weight: 567 lb (257 kg)
- Dimension: 79.1″L x 40.1″W x 71.2″H (L:2010mm, W:1020mm, H:1810mm)
KEY LANGUAGE 1 2 3
Items with Black call-outs require the language to be listed within the order
notes. IE. English
UPHOLSTERY 1 2 3
Items with Gray call-outs require the upholstery color listed within the
order notes. IE: Putty
FRAME AND WORK ARM COLORS 1 2 3
Items with Blue call-outs require the powder coat frame color to be listed
within the order notes. Add ‘No Clear’ after color – IE. Platinum No Clear
CLEAN GUIDE RODS
- Step must be completed prior to installing. Failure to do so can leave residue from packaging and other sources stuck in the bushings
- Guide rods need to make sure they are cleaned prior to installation otherwise this will cause the top plate to get stuck. It causes buildup in the bushings of the top plates. They just need to be cleaned out as well as the guide rods. Use Silicon
- Spray and fiber to remove any excess residue. These can be found around the house or at a nearby hardware store, pics below. Use silicon Spray and fiber.
POWDER COATED COMPONENTS
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | POSSIBLE RMA | WLDMT, PSSLP MAIN FRAME |
| 2 | 1 | 7448799 | WLDMT, PSSLP CARRIAGE |
| 3 | 1 | POSSIBLE RMA | WLDMT, SIDE FRAME |
| 4 | 1 | 7301199 | PLATE, PULLEY |
ITEMS ON THIS PAGE ARE POWDER COAT PAINTED. REFER TO PAGE 2 FOR ORDERING INSTRUCTIONS.
ASSEMBLY
COMPONENT ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | – | ASSY, PSSLP BASE FRAME |
| 2 | 1 | – | ASSY, PSSLP SEAT |
| 3 | 1 | – | ASSY, PSSLP SIDE FRAME |
| 4 | 1 | – | ASSY, FZ/PS- SLP SEAT ADJ – SG |
| 5 | 2 | 3251501 | ROLLER ASSY |
| 6 | 1 | – | ASSY, FZ/PS- SLP SEAT HANDLE – SG |
| 7 | 1 | 7399199 | PAD, 17 X 18 1/2 |
| 8 | 1 | 7409895 | SHIELD, FZ/PS- SLP CAM – SG |
| 9 | 4 | 3236602 | WASHER, 3/8 ID X 1.25 OD SS |
| 10 | 2 | 3236211 | SCREW, M10 X1.5 70MM |
| 11 | 22 | 3236601 | WASHER, 3/8 SAE SS |
| 12 | 6 | 3236801 | NUT, M10 HEX NYLOCK SS |
| 13 | 4 | 3236212 | SCREW, M10 X1.5 75MM |
| 14 | 4 | 3236210 | SCREW, M10 X1.5 65MM |
| 15 | 4 | 3236204 | SCREW, M10 X1.5 35MM |
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
| --- | --- | --- | --- |
| 16 | 2 | 3236201 | SCREW, M10 X1.5 20MM |
| 17 | 4 | 3241401 | WASHER, FLAT 12MM SS |
| 18 | 2 | 3241320 | SCREW, M12 X1.75 120MM |
| 19 | 2 | 3236803 | NUT, M12 HEX NYLOCK SS |
| 20 | 1 | 7414501 | CAM, FZ/PS- SLP OBLONG |
| 21 | 1 | 7342201 | PLATE, CABLE END |
| 22 | 1 | 7511295 | PLATE, FZ/PS- SLP TORQUE – SG |
| 23 | 1 | 7322301 | PLATE, 1.97 OD X .44 ID 10GA |
| 24 | 1 | 3236202 | SCREW, M10 X1.5 25MM |
| 25 | 1 | 3238502 | CAP, 1/2 X 3 |
| 26 | 1 | 9132601 | LABEL, 1- 15 STRAIGHT |
| 27 | 1 | 8161195 | BRKT, FZ/PS- SLP CABLE RETAINER – SG |
| 28 | 4 | 3251204 | SCREW, M10 X1.5 X 35MM UNS HEX CS ST ZN |
| 30 | 3 | 9462701 | CAP, HAMMER, END 2 X 4 |
SIDE FRAME ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 2 | 1 | 3237801 | PULLEY, 4.5″ OD |
| 3 | 2 | 7352001 | BUMPER, 2- 1/8 X 4- 5/8 |
| 4 | 1 | 7450901 | BOARD, PSSLP LINEXED |
| 5 | 1 | 7494301 | BOARD, PSSLP LINEXED |
| 6 | 10 | 3237401 | PLUG, 7/16″ HOLE |
| 7 | 2 | 7352301 | CAP, END 2 X 3 |
| 8 | 4 | 9217401 | CAP, 1.5IN X 2IN – 10- 14GA, END |
| 9 | 2 | 7408895 | WLDMT, FZ/PS- SLP RAIL BRKT- SG |
| 10 | 1 | 3239601 | PULLEY, 6″ OD x 10MM ID |
| 11 | 2 | 7961101 | TUBE, RAIL |
| 12 | 2 | 7444601 | BUMBER, DONUT |
| 13 | 23 | 3236601 | WASHER, 3/8 SAE SS |
| 14 | 9 | 3236208 | SCREW, M10 X1.5 55MM |
| 15 | 9 | 3236801 | NUT, M10 HEX NYLOCK SS |
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
| --- | --- | --- | --- |
| 16 | 2 | 3236204 | SCREW, M10 X1.5 35MM |
| 17 | 2 | 3236212 | SCREW, M10 X1.5 75MM |
| 18 | 2 | 7348101 | WASHER, SPACER |
| 19 | 1 | 3236207 | SCREW, M10 X1.5 50MM |
| 20 | 2 | 3241315 | SCREW, M12 X1.75 90MM |
| 21 | 2 | 3236803 | NUT, M12 HEX NYLOCK SS |
| 22 | 4 | 7388201 | FOOTPAD, PS RUBBER |
| 23 | 1 | – | ASSY, FZ/PS- SLP RND CAM |
| 24 | 1 | 3243201 | BEARING, 6007 BALL |
| 25 | 1 | 7511395 | WLDMT, FZ/PS- SLP HUB – SG |
| 26 | 1 | 7511601 | KEY, .375 SQUARE X 1.25 |
| 27 | 1 | 7690101 | BUMPER, SLEEVE – 1 INCH DIA |
| 28 | 2 | 3236213 | SCREW, M10 X1.5 80MM |
| 29 | 4 | 3241401 | WASHER, FLAT 12MM SS |
BASE FRAME ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 2 | 1 | 3237801 | PULLEY, 4.5″ OD |
| 3 | 2 | 7352001 | BUMPER, 2- 1/8 X 4- 5/8 |
| 4 | 1 | 7450901 | BOARD, PSSLP LINEXED |
| 5 | 1 | 7494301 | BOARD, PSSLP LINEXED |
| 6 | 10 | 3237401 | PLUG, 7/16″ HOLE |
| 7 | 2 | 7352301 | CAP, END 2 X 3 |
| 8 | 4 | 9217401 | CAP, 1.5IN X 2IN – 10- 14GA, END |
| 9 | 2 | 7408895 | WLDMT, FZ/PS- SLP RAIL BRKT- SG |
| 10 | 1 | 3239601 | PULLEY, 6″ OD x 10MM ID |
| 11 | 2 | 7961101 | TUBE, RAIL |
| 12 | 2 | 7444601 | BUMBER, DONUT |
| 13 | 23 | 3236601 | WASHER, 3/8 SAE SS |
| 14 | 9 | 3236208 | SCREW, M10 X1.5 55MM |
| 15 | 9 | 3236801 | NUT, M10 HEX NYLOCK SS |
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
| --- | --- | --- | --- |
| 16 | 2 | 3236204 | SCREW, M10 X1.5 35MM |
| 17 | 2 | 3236212 | SCREW, M10 X1.5 75MM |
| 18 | 2 | 7348101 | WASHER, SPACER |
| 19 | 1 | 3236207 | SCREW, M10 X1.5 50MM |
| 20 | 2 | 3241315 | SCREW, M12 X1.75 90MM |
| 21 | 2 | 3236803 | NUT, M12 HEX NYLOCK SS |
| 22 | 4 | 7388201 | FOOTPAD, PS RUBBER |
| 23 | 1 | – | ASSY, FZ/PS- SLP RND CAM |
| 24 | 1 | 3243201 | BEARING, 6007 BALL |
| 25 | 1 | 7511395 | WLDMT, FZ/PS- SLP HUB – SG |
| 26 | 1 | 7511601 | KEY, .375 SQUARE X 1.25 |
| 27 | 1 | 7690101 | BUMPER, SLEEVE – 1 INCH DIA |
| 28 | 2 | 3236213 | SCREW, M10 X1.5 80MM |
| 29 | 4 | 3241401 | WASHER, FLAT 12MM SS |
BOTTOM CAM ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | 7511495 | WLDMT, FZ/PS-SLP CAM SHAFT SG |
| 2 | 1 | 7511501 | SPACER, FZ/PS INTERNAL .403 |
| 3 | 1 | 7511502 | SPACER, FZ/PS INTERNAL 1.845 |
| 4 | 1 | 3243201 | BEARING, 6007 BALL |
| 5 | 1 | 7414401 | CAM, FZ/PS-SLP RND |
| 6 | 1 | 7511195 | PLATE, FZ/PS-SLP CAM THRD -SG |
| 7 | 4 | 3236601 | WASHER, 3/8 SAE SS |
| 8 | 4 | 3236204 | SCREW, M10 X1.5 35MM |
| 9 | 1 | 7342201 | PLATE, CABLE END |
| 10 | 1 | 7423803 | CABLE, PSSLP-2 |
SEAT ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 2 | 2 | 7352301 | CAP, END 2 X 3 |
| 3 | 2 | 3235801 | GRIP, 1.25 OD OPEN END |
| 4 | 2 | 7662901 | CAP, GRIP 1.25 OD |
| 5 | 4 | 3251501 | ROLLER ASSY |
| 6 | 2 | 7662801 | RING, GRIP 1.25 OD |
| 7 | 8 | 3241401 | WASHER, FLAT 12MM SS |
| 8 | 4 | 3241320 | SCREW, M12 X1.75 120MM |
| 9 | 4 | 3236803 | NUT, M12 HEX NYLOCK SS |
| 10 | 1 | 7354099 | PAD, BACK 32-1/2 X 11-1/4 |
| 11 | 4 | 3236601 | WASHER, 3/8 SAE SS |
| 12 | 4 | 3236204 | SCREW, M10 X1.5 35MM |
| 13 | 2 | 8039501 | LABEL, WARNING,TRIANGLE |
SEAT ADJUST ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | 9064495 | WLDMT, FZ/PS-SLP SEAT ADJ -SG |
| 2 | 4 | 7778501 | BLOCK, FZ/PS-SLP |
| 3 | 1 | 9064302 | WLDMT, FZ/PS-SPL ADJ |
| 4 | 1 | 7414301 | STUD, M10 BALL END M10 X 1.5 |
| 5 | 1 | 7354301 | SPACER, 7/16 ID X .75 OD X 1 |
| 6 | 2 | 3236601 | WASHER, 3/8 SAE SS |
| 7 | 1 | 3236205 | SCREW, M10 X1.5 40MM |
| 8 | 1 | 3272301 | SPRING, GAS 135N – 350MM |
| 9 | 1 | 7351301 | PIN, PULL |
| 10 | 1 | 7351501 | SPRING, PULL PIN LARGE |
| 11 | 1 | 6140701 | GLIDE 1 X 1 |
| 12 | 8 | 3241707 | SCREW, M6 X1 50MM |
| 13 | 8 | 3241801 | WASHER, FLAT 6MM SS |
| 14 | 8 | 3236802 | NUT, M6 HEX NYLOCK SS |
| 15 | 1 | 3236701 | WASHER, FENDER 3/8″ ID X 1.5″ OD SS |
| 16 | 1 | 3102802 | NUT, NYLOCK 3/8-16 |
SEAT HANDLE ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION | COLOR |
|---|---|---|---|---|
| 1 | 1 | 7412295 | WLDMT, FZ/PS-SLP LEVER SG | – |
| 2 | 2 | 3104901 | .75″ ID 1.00″ OD BRONZE BUSHING | – |
| 3 | 1 | 7324802 | SHAFT, TAPPED 0.75 DIA X 1.800 | – |
ASSEMBLY DIRECTIONS
WEIGHT STACK ASSEMBLY
- STEP 1. RUBBER BUMPERS
- STEP 2. GUIDE RODS – TILT OUT
- STEP 3. WEIGHT PLATES
- STEP 4. T OP PLATE/SELECTOR ROD- REMOVE FROM CABLE FOR NOW + INSTALL THE TOP PLATE
- STEP 5. TILT IN GUIDE RODSRAISE THEM IN ORDER TO BOLT THEM IN
- STEP 6. INSTALL THE WEIGHT SELECTOR PIN AND REATTACH CABLE TO THE TOP PLATE AND THEN STORE WEIGHT ADAPTERS ON THE CHROME BRACKET AT THE TOP SO THAT THE CABLE CAN BE TIGHTENED AND ADJUSTED
WEIGHT STACK ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | 7353901 | HEADPLATE, WT. STACK |
| 2 | 1 | 7356601 | STEM, PRO2 19 HOLE |
| 3 | 19 | 7328401 | WEIGHT PLATE, 20 LB |
| 4 | 1 | 3236001 | BUSHING, SPRING PIN |
| 5 | 2 | 7338001 | BUSHING, HEADPLATE |
| 7 | 1 | 7353001 | ASSY, SELECTOR PIN |
| 8 | 1 | 7356501 | PLUG, LANYARD ATTACHMENT |
| 9 | 1 | 7523601 | CRIMP, CABLE |
| 10 | 1 | 7927201 | LABEL, 390 LB STACK |
| 11 | 7927301 | LABEL, 195 KG STACK |
INCREMENT WEIGHT ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 1 | 2 | 8047001 | ASSY, PS, INCREMENT WEIGHT |
| 2 | 1 | 8700801 | PLATE, INCREMENT WEIGHT STRIKER |
| 3 | 2 | 3236202 | M10 X 1.5 X 25 SHCS, LOW HEAD |
| 4 | 2 | 3236801 | NUT, NYLOCK M10 X 1.5 SS |
| 5 | 2 | 7767601 | BUMPER, PS INCREMENT |
| 6 | 2 | 3237401 | PLUG, 7/16″ HOLE |
REAR SHROUD ASSEMBLY
| ITEM NO. | QTY. | PART NO. | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | 9475705 | SHROUD, HS REAR 58.25 X 21.43 |
| 2 | 6 | 7655301 | BRKT, PS REAR SHIELD |
| 3 | 12 | 3236601 | WASHER,3/8 SAE STAINLESS STEEL |
| 4 | 12 | 3236201 | M10 X 1.5 X 20 SHCS, LOW HEAD |
WARRANTY
- 10 Years Parts, 1 Year Labor (Commercial)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>