COMFIER BD-2205 Bidet Attachment for Toilet Seat User Manual

: June 9, 2024
: COMFIER

Table of Contents

PRODUCT INFORMATION
PRODUCT INSTALLATION
CUSTOMER SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COMFIER BD-2205 Bidet Attachment for Toilet Seat

COMFIER BD-2205 Bidet Attachment for Toilet Seat

PRODUCT INFORMATION

Features

High-quality ABS material with full body panel
Dual Nozzles with self-cleaning
Ambient temperature bidet wash
Adjustable water pressure
High-quality metal 7/8 “T adapter connector
Durable braided metal cold water hose
No electricity or batteries required
Easy installation and adjustable toilet fit
All accessories included for standard installation

Parts list

Installation Tools You May Needed ( not included)

Wrench
Plumbers Tape
Screwdriver

Dimensions

PRODUCT INSTALLATION

PREINSTALLATION

IMPORTANT
Please be advised that the provided T-Valve should be installed at the fill valve under the toilet tank. NOT down at the water supply coming from the wall.

Product Installation

INSTALLING

Shut off water supply to toilet. Flush toilet to drain all water inside the tank.
Release the bolts on both side of the existing toilet seat.
Remove existing seat and lid .
lnstall the rubber non-slip mats to the bottom of the the bidet.
Place the adjustable mounting brackets into the bidet seat coupling holes.
lnstall bidet on toilet.
Place bidet on toilet, and adjust its position, ensure the nozzles on the middle and won’t be blocked when spraying. And then adjust the mounting brackets angle, make them fit for the toilet seat installation holes on the toilet, and then mount toilet seat back and tighten.
Cold Water Installation
Connect supplied T adapter to fill valve underneath of toilet water tank and connect 65cm/25.59 inch metal braided hose between T adapter and cold water inlet of bidet

Completed installation

Completed installation

HELPFUL TIP

Over tightening can cause damage to the threads and result in water leakage.
Use only hand pressure first and check for any leakage.
Turn only less than quarter turn at a time making sure there is no leakage.

Product Installation

HOW TO USE

Product Installation

Knob 1: turn left to adjust water pressure, the more we turn it, the bigger the water flow
knob 2: rotate according to indicator on the knob for function selection

TROUBLE SHOOTING

If the nozzles are clogged for some reason, please simply try to move them up and down manually for few times.
Trouble Shooting

USERS GUIDE OF BUMPER

After the installation. If there’s gap between toilet seat and bowl like shows, let me help you!

Users Guide Of Bumper

Select appropriate places
Tear off the film on my back for us,and clean them
Stick me on the selected place, and push me.

WARRANTY

If you have any issue about the product, please feel free to contact us by sending email to supportus@comfier.com We will strive to provide the best service possible within 24 hours.

30 days unconditionally return Comfier product can be returned to receive a full refund for any reason within 30 days. Please contact our customers service (supportus@comfier.com), our staff will contact you within 24 hours.

90 days return/replace Comfier product can be returned / replaced within 90 days if the product break down in the period of proper use.

12 months Warranty If the product breaks down within 12 months in the period of proper use, customers can still seek for the relevant product warranty to get it replaced.

Attention! No warranty will be given to any force majeure or man-made causes for a defective product, such as improper care, personal tear down and willful damage, etc.

Extend Warranty for Free

1) Enter the following URL or scan the QR code below to find COMFIER facebook page and like it, enter “Warranty” to messenger to extend your warranty from 1 year to 3 years.

https://www.facebook.com/comfiermassager

OR 2) Send message “Warranty” and email us supportus@comfier.com to extend your warranty from 1 year to 3 years.

Tel: 248-819-2623 Monday-Friday 9:00AM-4:30PM

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.