TalkGo TSO-BLK-01 Talket Charger User Guide
- June 4, 2024
- TalkGo
Table of Contents
TalkGo TSO-BLK-01 Talket Charger
Overview
SET UP
Once your device is fully charged, return to the TalkGo app for easy setup. During this process, the app will walk you through a series of easy steps. During the setup process, you will be asked to click the side button once, then the device will begin to rapidly tlash blue until it has been properly paired. You will select the name that appears in the app: TalkSocket or Talket. Once it has paired successfully, the LEDs will Hlash green. IF the pairing setup is not successful, it will flash red after 2 minutes letting you know it didn’t pair and to try again. When the device has been properly paired, you will be directed to the Alexa app to finish the last step in connecting your device. Now i’s time to start talking!
MUTE
To mute the product, click the side button once and a light will turn red indicating you are now on mute. To turn it off mute, click the side button once again and the red light will turn oft. You can start talking to your device again.
POWER ON/OFF
- To turn ON the device, click the side button once. The device will blink blue until it blinks green two times signaling that it’s now connected to the phone. If the device can not connect to the phone it will flash red letting you know it could not pair properly.
- To turn OFF the device, press and hold the side button for 3 seconds. You’ll see the device flash white twice indicating that you disconnected from Bluetooth and powered off.
TalkSocket
With integrated PopSockets PopGrip Peel clear film off the bottom of the product and stick it to the back ot your phone or case. Push down and turn the TalkSocket 90° to remove the device from the PopGrip base. To apply the TalkSocket to the PopGrip base, align the two pieces and turn 90° until you hear a click to ensure it is properly connected.
Talket
Peel clear film off the bottom of the product and adhere to the back of your phone, case or MagSafe accessory products.
How to use
Step 1
Start charging. Place the device face down on the charger. The device will flash yellow to acknowledge it’s charging. Once it’s fully charged, the light will show green.
Step 2
While the device is charging, download the TalkGo app on the App Store or Google Play. Once the device is fully charged, open the TalkGo app and begin the onboarding process.
Your smart speaker away from home
- Truly hands-free – no unlocking, clicking or swiping.
- 2-3 days of battery (depending on usage)
- Water/dust/impact resistant – IP67
- Always evolving to be compatible with other voice assistants.
- Enables your headphones and car speakers to work with your favorite voice assistant.
How? TalkSocket hears your commands then your voice assistant answers through the audio device your phone is connected to.
Compliance Information
Hereby, TalkGo Inc., declares that this device is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. SAR: This device has been tested and meets applicable limits for radio frequency exposure. The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.
Battery Safety
Your device contains rechargeable lithium-ion polymer batteries and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery.
Operating Information
Frequency:
Bluetooth (2402-2480 MHz) Maximum Radio Power < 10 dBm, Wireless Power
Consortium (111-205 kHz) Input rating: 5V⎓300mA, Battery Rated: 3.7V⎓129mAh.
iPhone®, iPad®, and iPod Touch® are trademarks of Apple Inc., registered in
the U.S. and other countries. Use of the Made for Apple badge means the an
accessory has been designed to connect specifically to the Apple product(s)
identified in the badge and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operations of the
device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with an Apple product may affect wireless
performance.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the userʼs authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a class B Digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with ISEDʼs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.
Support
For support and troubleshooting information, please go to
www.TalkGo.io/FAQ or reach out to us at
Contact@TalkGo.io.
We are here to ensure you have a great experience with our products.
Warranty
We offer a 1-year limited warranty on all TalkGo products. Exclusions and limitations may apply. Visit us at www.TalkGo.io/Warranty
TalkGo, Inc.
3518 Fremont Ave N #473 Seattle, WA 98103 USA
www.TalkGo.io