EMWL 87301 Nikon Full Frame or Micro User Manual
- June 12, 2024
- EMWL
Table of Contents
EMWL 87301 Nikon Full Frame or Micro User Manual
INTRODUCTION
Thank you for purchasing this Nauticam product.
Before using the product, please read this manual thoroughly to familiarize yourself with full scope of functions on the product as well as ensuring that you will use the product correctly
PACKAGE CONTENTS
Make sure that you have all the included items listed below before using this product. If some items are missing or damaged, contact your local Nautica dealer.
EMWL set packages:
87 301 EMWL Set #1 | 87302 EMWL Set #2 | 87303 EMWL Set #3 |
---|---|---|
1 x Focusing Unit #1 | 1 x Focusing Unit #2 | **1 x Focusing Unit |
3**
- 1 x Relay Lens 150mm
- 1 x Objective Lens 60°
- 1 x Objective Lens 100°
- 1 x Objective Lens 130°
- 5 x Lens Protective Case
- 1 x Filter Sleeve
- 3 x Cleaning Cloth
- 1 x Nautica T-shirt
- 1 x Manual Card
- 1 x Nautica Package Case (with strap)
* all EMWL lens units can be purchased separately
EMWL 160° Objective Lens packages:
- 1 x Objective Lens 160°
- 1 x Lens Protective Case
- 1 x Cleaning Cloth
- 1 x Manual Card
IMPORTANT INSTRUCTIONS
- Water-tight test of the housing (without camera inside) along with EMWL before usage is recommended.
- Do not use any kind of abrasive solution to clean the glass surfaces.
- Do not expose the housing in direct sunlight for a prolonged period
- Do not point of the lens directly towards the sun.
- Do not sealed the housing system when travelling by air.
- Defective products should be shipped to our distributors for service. Do not attempt to disassemble and /or modify any part of the lens
- Do not open the housing system in wet or sandy environment. Protect the housing and lenses from moisture and debris in order to prevent malfunction or leakage.
- Prevent any sand or dust or water penetration inside the housing and in between lenses. Be extra careful when changing lens and inserting or removing the camera.
- The housing setup should be positioned on the a stable and safe surface on land.
- Do not jump in water carrying the housing setup. Always have the setup handed to you when you are in water
- This product is not intened for use by children, or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised and/ or given instruction by a responsible person concerning use of the product to ensure that they can use it safely.
PART NAMES
Lens mount release button
Air release ring close
Air release ring
Air release ring open
Lens mount index mark
FUNCTIONS
We recommand to set the desire focusing range before approaching the subject underwater.
There are 3 focusing ranges that can be set and adjust in water:
∞-55mm
55mm-25mm
25-0mm
The EMWL objective lenses generate an inverted image, making the image appear upside down. The relay lens corrects the inverted image and relays the image back to the focusing unit and into the camera sensor.
With Relay Lens Setup
The relay lens is 150mm in length and only 62mm at its widest point.
This allows the front of EMWL to be placed extremely close to the subject
while keeping the bulk of the camera system and the photographer at an
extended distance.
Without Relay Lens Setup
It is possible to use the EMWL without the relay lens if you do not need
the extended working distance, but you will want a camera or a monitor that
can correct the inverted image in EVF or LCD.
The EMWL modular system is designed for exchangability underwater, each module can assemble and disassemble in water. When entering the water or each time after interchanging lenses, air bubbles might be trapped in between lenses. The air release ring is to allow water to pass through and therefore releasing the air bubbles.
- Interchanging lenses in sandy bottom and murky water is not recommanded.
- We recommand to open and close the air release ring only when the water is clear.
There are 2 types of air release ring :
Type 1: Objective Lens 60°
air release ring in open position
air release ring in close position
Type 2:
Objective Lens 100° Objective Lens 130° Objective Lens 160° Relay Lens
air release ring in open position
air release ring in close position
To prevent particles being trapped in between lenses in murky water, we suggest to wrap fi lter sleeve provided over the air release ring before going into bad water condition. The air release ring on/off position can function as usual after wrapping.
wrapping filter sleeve over the air release ring
filter sleeve can be peeled off easily by hand
EMWL LENS TO LENS MOUNT
The EMWL uses the Nautica bayonet mounting system for assembling and disassembling.
To Assemble
To disassemble
EMWL SYSTEM TO LENS PORT
Before mounting the EMWL onto the lens port, it is necessory to fi rst attach a M67 to bayonet converter (#83250).
To attach
To remove
SPECIFICATIONS
*For compatible lenses, please refer to EMWL port chart on the website.
Focusing Units| #87201 Focusing Unit #1| **#87202 Focusing Unit
2| #87203 Focusing Unit #3**
---|---|---|---
Optical Design| 6 elements in 3 groups| 6 elements in 3 groups| 6 elements in
3 groups
Bayonet| Nauticam bayonet mount| Nauticam bayonet mount| Nauticam bayonet
mount
Largest Diameter| 96mm| 96mm| 96mm
Length| 83.4mm| 71.4mm| 66.9mm
Weight| In air 740g / In water 480g| In air 627g / In water 400g| In air 616g
/ In water 410g
Depth Rating| 150m| 150m| 150m
Lens Body| Hard anodized aluminium alloy| Hard anodized aluminium alloy| Hard
anodized aluminium alloy
Lens Coating| Anti-reflection| Anti-reflection| Anti-reflection
Objective Lenses| #87221 Objective Lens 60 °| #87222 Objective
Lens 100 °| #87223 Objective Lens 130 °
---|---|---|---
Optical Design| 9 elements in 6 groups| 9 elements in 6 groups| 9 elements in
6 groups
Focus Range| 15 mm to ꝏ| 15 mm to ꝏ| 10 mm to ꝏ
Bayonet| Nauticam bayonet mount| Nauticam bayonet mount| Nauticam bayonet
mount
Largest Diameter| 62mm| 62mm| 62mm
Length| 97.0mm| 88.5mm| 123.2mm
Weight| In air 378g / In water 260g| In air 218g / In water 130g| In air 510g
/ In water 290g
Depth Rating| 150m| 150m| 150m
Lens Body| Hard anodized aluminium alloy| Hard anodized aluminium alloy| Hard
anodized aluminium alloy
Lens Coating| Anti-reflection| Anti-reflection| Anti-reflection
CARE/STORAGE
- Soak the housing system along with the EMWL in fresh water after salt water usage
- Operate all controls and buttons at least 3 times while immersed in fresh water\
- We recommend cleaning and inspecting the main O-ring each time after diving for any damage and every time the housing is opened.
- Protect the housing and lenses with robust and shock-proof travel case during transportation. Do not travel with camera inside housing.
- We recommend to ship the housing to our servic centers for a complete overhual after 200 dives/every 2 years.
WARRANTY
All NAUTICAM Housing Products and Viewfi nders are warranted against any material and manufacturing defects for two years from the date of purchase for consumer use. NAUTICAM Optical Accessories are warranted against material and manufacturing defects for a period of one year, and HDMI cables carry a year warranty. This warranty only applies to products purchased from authorized NAUTICAM dealers and does not extend beyond the original retail purchaser.
To return your product for service, please contact your regional authorized service center(s). Please note that this warranty only applies when the product is purchased in the territory where the service center is located.
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the owner to carefully follow the instructions in our manuals.
NAUTICAM does not hold responsibility for damage, of any nature, to any equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning of our products.
Unauthorized modifi cations and/or repairs of our products will automatically invalidate the warranty
Nauticam Internationl Ltd.
Rm 2203, CCT Telecom Bldg, 11 Wo Shing St, Fo Tan, Hong Kong
Tel. +852 – 26902711
Fax. +852 – 26909778
URL. www.nauticam.com
Gallery. www.nauticam.smugmug.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>