MIJ Etereo TC2 eBuddy Headset User Manual

MIJ Etereo TC2 eBuddy Headset

Product Information

The product is a device that complies with Part 15 of the FCC Rules. It is designed to operate within certain parameters to ensure it does not cause harmful interference and can accept any interference received, including interference that may cause undesired operation.
Please note that any modifications made to the device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.

Product Usage Instructions

To ensure proper usage of the device, please follow these guidelines:

1. Do not make any modifications to the device that are not expressly approved by the party responsible for compliance.
2. Operate the device within the specified parameters to avoid causing harmful interference.
3. If you experience any interference while using the device, it is important to note that it must accept such interference and may continue to operate as intended.
4. Ensure that the device is used in accordance with any additional instructions provided by the manufacturer.

By following these instructions, you can ensure the proper operation of the device while maintaining compliance with FCC regulations.

Product Features

Volume Up Kit

Option

Product Specification

• Pairing Device Bluetooth Profile:
  Bluetooth v5 (HFP 1.7 HSP 1.2 A2DP 1.3 AVRCP 1.6 PBAP 1.2)

• EMC MIC
  -38dB

• Operating Range
  10m

• Equalizer
  5 band EQ Frequencies

• Headset Frequency Response Range
  230Hz ~ 10,000Hz

• Battery Capacity
  220mAh (110mAh * 2)
  Applied battery use balancing technology.
  Running time

  • Normal Mode – 6 hrs.
  • Hearing-aid Mode – 6 hrs.
  • Charging Time: 2 hrs.

• Low Power Design

  • Reduced power consumption by miniaturization PCB
  • Approximately 20% usage time improved as compared to existing products.

• Pairing Device Bluetooth Profile: Bluetooth v5
  (HFP 1.7 HSP 1.2 A2DP 1.3 AVRCP 1.6 PBAP 1.2

• Operating Range
  20m

• Equalizer
  Separate right/left vibrator equalizer

• MEMS MIC
  42dB ± 3

• Design
  Headset Net Weight : 65g Headset Dimension : 508617(mm)

• Audio Input Option
  Bluetooth, AUX(3.5mm)

• Additional Function
  Temperature Sensor : 2° c to 150° c

• OLED
  1.3inch distinct Display

• Battery Capacity
  950mAh Applied Large Capacity Battery Running time

  • Normal Mode – 24 hrs.
  • Charging Time: 2 hrs
    

Buttons Control

Power Buttons

• Press Once Shortly
  Hearing aid mode

  • Press the button shortly you will hear the voice guidance instruction and LED flicker in every 5 seconds.

• Headset mode

  • Press the button once shortly you will hear the voice guidance instructions and the green LED continues to flicker in every second.

• Press and hold (3secs)

  • The power off.

• Press once to receive the call

  • Answer the call
  • End the call

Volume Button

• Press short
  • +, – tap to adjust volume.
• Bluetooth pairing mode
  • Press and hold the Vol -(MINUS) button for more than 3 seconds. You will hear the voice guidance.
• Press and hold + button for 3 seconds
  • To run BTS function
  • Exit BTS function

Bluetooth Connection

(Smartphone connection)

1. Power Button
   When the headset is in power-off state, press and hold the power button for more than 3 seconds to turn on.

2. Pairing Mode
   Press and hold the -(MINUS) button for more than 3 seconds to enter pairing mode. (It is residual if the connection is wrong).

3. Smartphone
   Go to setting

   • Connection
   • Bluetooth
   • Find Device
   • SelectTC2

< e-suoov>

1. Power Button
   When the headset is in power-off state, press and hold the power button for more than 3 seconds to turn it on.

2. Hearing Aid Mode
   Press and hold the power button and check if the green LED flickering in every 0.5 seconds. (Follow the instruction given in page 14)

3. Press and turn on the power of e·Buddy.

4. Press and hold the power button (e·Buddy) briefly to set it to master mode (continued in page 17)

Button Control

Power Function

• Press and hold the button for 3 second
  The power will on and off

• Press the button shortly
  Switch to Toggle
  Switch to Bluetooth Mode
  (Headset Connection)

Volume Control

• Press once
  Press (right/left) preferred button to adjust volume.

• Press left plus { +) button and hold it for more than 3 second
  To run the BTS function. ON/OFF sign displays on the screen.

• Press left minus {-) button and hold it for more than 3 second
  Enter to the EQ change mode. (For more information, please check our website)

• Press right plus { +) button and hold it for more than 3 second
  To initialize the Bluetooth pairing function. Enter the key setting mode

• Press right minus {-) button and hold it for more than 3 seconds
  Enter to the EQ change mode. (For more information, please check our website)

Addition Statements

Attention

• The product has a built-in battery. Be sure to charge the built-in battery before use.

• The battery charger takes two hours to charge.

• Never attempt to remodel or disassemble the headset or e·BUDDY. It causes major malfunctions or fails in function.

• Keep it out of moisture and in a dry place.

• The product has a built-in lithium-ion battery.
  Avoid intense radiation such as sunlight or fire to prevent products from exploding.

• High charge after fully charged and fully discharged will gradually reduce cycle life of batteries.

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution

Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Compliance Information :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

mijkorea.com

Head Office.
24461 #204, 882, Baksa-ro, Seo-myeon, Chuncheon-si, Gangwon-do, Republic of Korea
8 +82-33-252-8995

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>