GARMIN IDC23 High 8155 Infotainment System Instruction Manual
- June 12, 2024
- Garmin
Table of Contents
GARMIN IDC23 High 8155 Infotainment System Instruction Manual
Model\Product: IDC23 High 8155
Version: 1.0 English
Date: Version
2022-10-18
1. Technical Information
1.1 Materials
IDC23 High 8155 Infotainment System – Conformity with RoHS, RED, ISO, etc .
The IDC23 High 8155 is an infotainment head unit for vehicles. It does not include a display. It contains GNSS, Bluetooth, BLE, and Wifi 802.11a/b/g/n/ac/ax (2.4GHz and 5GHz) MIMO capability. The external connections are:
- BT/WLAN – antenna connection
- USB1/2/3 – for USB 2.0 connections
- Main – power and CAN
- CID – APIX2 and APIX3 display link (HDCP2.3)
- AR-CAM – camera
- 100BASE-T1 (OABR) – ethernet
- 1GBASE-T1 – 1GBit ethernet
- GNSS – GNSS antenna connection
- DCS – driver camera system
- DFE – design front end (instrument panel displays)
- HUD – head up display
1.2 Declaration of Conformity to RED regulation 2014/53/EU Declaration of Conformity (DoC)
We declare that the radio equipment type IDC23 High 8155 is in compliance with
the radio equipment directive 2014/53/EU. EU declaration of conformity is
available at https://www.garmin.com/en-US/legal/compliance/.
1.3 Used Frequency spectrum
- BLE/Bluetooth 2402-2480 MHz
- WLAN 2402-2482 MHz
- WLAN 5170-5250 MHz
- WLAN 5250-5330 MHz (DFS)
- WLAN 5490-5600 MHz (DFS) Canada
- WLAN 5600-5650 MHz -> Not being used for Canada
- WLAN 5490-5725 MHz (DFS) USA
- WLAN 5650-5725 MHz (DFS) Canada
- WLAN 5735-5815 MHz
1.4 Manufacturer & Factory Units
Manufacturer:
Garmin Wurzburg GmbH Beethovenstrasse 1A 97080 Wurzburg, Germany
Factories:
Olathe AOEM Factory Garmin International 1100 E 151st St
Olathe KS, 66062
Poland AOEM Factory Garmin Wroclaw LLC ul. Ryszarda Chomicza 2, 55-040 Biskupice Podgorne, Polska
1.5 FCC/ISED statements
Model: IDC23 High 8155 FCC ID: IPH-03911
IC: 1792A-03911
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This radio transmitter has been approved by the FCC/ISED to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
This device complies with the FCC/ ISED RF exposure limits and has been evaluated in compliance with portable exposure condition.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.
This device has been shown to be capable of compliance for localized SAR for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and has been tested in accordance with the measurement procedures specified in ISED RSS-102 and IEEE Std. 15282013.
The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations.
To comply with the measured SAR value/SAR testing exclusion, the equipment
must be installed and operated with a minimum distance of 5 cm of the human
body.
The product complies with FCC/ISED regulations regarding transmission on 5GHz
bands.
Data transmission is always initiated by software, which is the passed down through the MAC, and finally to the RF chip. Several special packets are initiated by the MAC on an application request. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be ON only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure per 15.407(c) and RSS-247 § 6.4(a).
The product will be installed within a vehicle by OEM customer BMW. Service (as SW updated) will be executed by car service garages or Over-The-Air from OEM customer server. End customer has no possibility to do SW update. Additionally, all SW update packages are signed, and the signature is verified on the system before new SW can be installed per RSS-247 § 6.4(b).
For IDC23 High 8155, the maximum antenna gain permitted in the bands 5250-5350 MHz, 5470-5725 MHz and 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limit per RSS-247 § 6.4 (c).
FCC Class B device notice
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-003 (B)
This Class B digital apparatus complies with Canadian ICES-003.
1.6 Mexico declaration:
Modelo: IDC23 High 8155 Marca: BMW
Importador:
Company Name: BMW de México, S.A.
Address: Av. Javier Barros Sierra 495, Piso 14, Oficina 1401, Park Plaza III,
Col. Santa Fe, Alcaldía Álvaro Obregón, Ciudad de México
Postcode/Zip Code: 01376
Legal representative name: Bertino Blázquez González / Estela González Borja
Phone number: +52 55 8944 4444
Email: Estela.Gonzalez-Borja@bmw.com.mx
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>