viatek MFC-45 2 In 1 Wet Dry Grinder Instruction Manual
- June 4, 2024
- Viatek
Table of Contents
2 In 1 Chopper™
Instruction Manual
READ THE MANUAL FULLY BEFORE USING IT.
INCLUDES:
2 in 1 Chopper (MFC-45)
PARTS DIAGRAM
OPERATION PROCEDURE
- Before use, please clean the parts that contact directly with food, such as the grinding cup. chopping blade and chopping cup.
- Install the chopping blade into the center of the chopping cup. (Make sure no foreign objects are in the chopping blade hole or shaft). Then place food for grinding.
- After placing the food in the cup. screw the chopping cup to the main body lining up with the indication mark.
- Place food in the grinding cavity for grinding
- Screw the grinding cup to the main body lining up with an indication mark. Both the chopping cup and griding cup have to be installed for proper operation.
- When the unit is working the indicator light will be white. The indicator light wilt turns red once power is low and the unit needs to be charged.
- With both cups installed on the main body. the indicator light will flash once. Press the switch to start and release the switch to stop. The 2-in-1 Chopper will automatically shut off after 40 seconds.
- A red light will always be on when the unit is charging. A white light will come on once the unit has fully charged.
PRODUCT PARAMETERS
Product Name | Chopper and Grinder 2 in 1 |
---|---|
Model Name | M FC-45 |
Rated Voltage | 3.7V **** |
Rated Power | 45W |
Rated Chopping Capacity | ≤ 60g |
Rated Grinding Capacity | 15-40g (Depend on the volume of ingredients) |
Rated Charging Voltage | 5V ****1A |
Charging Time | 2H |
Continuous Working Time | ≤ the 40S |
Motor Speed | 19000 RPM |
Product Size | 82 x 82 x 162mm |
Executive Standard:GB 4706.1-2005 GB 4706.30-2008
RECIPE GUIDE
Food | Quantity | Longest Chopping Time | Remarks |
---|---|---|---|
Pork | ≤ 60g | The 30S | Remove the bone, and cut it into pieces about .75″ x.75″ |
x.75″ in size
Beef| ≤ 60g| The 30S| Remove the bone, and cut it into pieces about .75″ x.75″
x.75″ in size
Garlic| ≤ 60g| The 20S| Pealed.
Small Chilli| ≤ 40g| The 20S| Remove the pedicle.
Carrot| ≤ 60g| The 20S|
Celery| ≤ 50g| The 20S|
Food| Quantity| Longest Grinding Time
---|---|---
Coffee Beans| ≤18g| The 40S
White Sugar| ≤18g| The 15S
Peanuts| ≤18g| The 40S
Sesame| ≤18g| The 40S
Food| Quantity| Longest Grinding Time
---|---|---
Sichuan Pepper| ≤15g| The 30S
White/Black Pepper| ≤30g| The 40S
Dried Chilli| ≤ lOg| The 30S
Mung Bean| ≤ 30g| The 40S
The above quantity and time for chopping and grinding can be adjusted
according to actual needs. The chopping and grinding time can be increased or
decreased appropriately.
Reminder: Peanuts and Sesame contain oil. Please do not grind these items
for too long of a time frame. This will avoid ground food particles from
attaching to the blade holder and the inner wall of the grinder. Which can
cause the motor to run idly. When grinding harder food please reduce the
amount of food being ground appropriately, and increase the grinding time.
When grinding, it is recommended to operate the grinder in intermittent mode:
Press the switch button to start, release it to stop, shake the grinder, and
then restart it. Repeat this operation until the ingredients are ground well.
ENVIRONMENTAL NOTICE
- This product meets the requirements of Measures for the Administration of the Restricted Use of the Hazardous Substances Contained in Electrical and Electronic Products.
- During the environment-friendly use period of this product, problems that affect consumer health will not occur during proper use, such as leakage or precipitation of hazardous substances. Please rest assured to use.
- The environment-friendly use period of this product is 10 years. It is valid only when this product is used properly under this instruction manual.
Name and content of hazardous substances in the product
Product Components | Hazardous Substances |
---|---|
Pb | Hg |
Plastic components | ◯ |
Hardware components | ◯ |
Container | ◯ |
Motor components | X |
Circuit board assemblies | X |
Power cord | X |
This form is in accordance with SJ/T 11364.
◯ : indicates that the content of that hazardous substance in all
materials of the corresponding component is below the limit requirement
specified in GB/T26572.
X: indicates that the content of that hazardous substance in at least one
kind of material of the corresponding component exceeds the limit requirement
specified in GB/T26572.
Remarks: Among the components marked with “X”, some contain hazardous
substances in excess of the standard due to the current limited technical
level of the industry. It is temporarily impossible to replace or reduce them.
PRECAUTIONS
Problem | Reason | Solution |
---|---|---|
The product cannot start or power off during use with a flashing red light. | ||
Low power. | Charge the product in time. | |
Shuts down during use with red light for 5 seconds. | Overload protection. |
Remove excess ingredients or cut the ingredients into small pieces and
restart.
Vibrates abnormally or is too noisy.| 1. The chopping blade has not been
installed properly.
2. The chopper has not been placed stably.
3. The proceeding ingredients are too much.| 1. Take out the ingredients and
reinstall the blade properly.
2. Lever the product.
3. Remove excess ingredients.
The product does not start and is accompanied by alternately flashing red
and white lights.| Protection program of the
the machine is not connected.| 1. Check if the magnet at the lip of the cup
is missing.
2. Assemble both the grinding cup and chopping cup properly, then the
indicator light flashes once
FOOD SAFETY
This product and food contact materials are in compliance with the relevant standard for food safety.
Part| Materials| Standard
Chopping cup and Grinding cup| PC| GB 4806.7-2016
Chopper case and Grinding cavity| ABS| GB 4806.7-2016
Chopping blade and Grinding blade| POM + sus304
GB 4806.7-2016| G
GB 4806.9-2016
Screw plug| Silicone oil(Silicone rubber)| GB 4806.11-2016
Reminder:
The food contact parts and materials are different between different product
models.
The finally purchased model shall prevail.
Conditions:
1. Stainless steel parts avoid strong acid substances.
2. The operating temperature of POM shall not be higher than 120° C.
WARRANTY CARD
Customer Name| | Telephone No.|
---|---|---|---
Address|
Machine Type Purchased| | Production Lot Number|
Date of Purchase| | Place of Purchase|
Customer Opinion|
Maintenance Time| Reason| Mode| Maintenance Location
| | |
| | |
WARNINGS
In order to avoid injury by misusing, please read this user manual
carefully before using this product, and follow all instructions strictly when
using it.
- In addition, please completely clean and dry all the parts that come in contact with food before using it.
- The main body can be removed only after the product has been powered off and the blade has totally stopped working.
- This product can not be used to process very hard foods, such as meats with bones, frozen foods, etc.
- Before using the grinder, please check for proper blade installation. Turn the grinder on and make sure the blade runs freely. If the blade does not rotate or rotates slowly, check for a blockage in the cup and remove it.
- After adding food, please check whether the blade has deviated from the right position. If the blade fails to run quickly within a few seconds, please level it or remove some food before continuing to use it.
- Please clean the powder in the grinding cup and container after grinding to avoid affecting the next use.
- To avoid injury, do not place fingers in the cup when pouring out the ground powder
- This product cannot continuously work for more than 40 seconds each time. It is recommended to use the grinder in 2-minute intervals to avoid overloading the electronic components.
- This product is equipped with an overload protection function. If the blade becomes stuck due to excessive or hard food the unit will shut down for protection, and the red indicator light will come on for 5 seconds. The unit can be restarted after the obstruction has been removed.
- All parts of the unit cannot be sterilized with hot water over 6o degrees or in the microwave. The heat will cause damage and deformation to the unit.
- Do not put the main body of the unit in the dishwasher. No water can come in contact with the parts inside the main body of the unit.
- Do not use steel wool, abrasive cleaners, or corrosive products to clean any part of this appliance.
- Do not immerse the main body in water or rinse it under the tap. Use only a moist cloth to clean the outer surface. so as to avoid water immersion then causing malfunction.
- When removing the blades for food or cleaning, do not touch the blades with any part of your body to avoid injury. Hold the upper part of the blades for assembly and disassembly.
- Please disconnect the power when the unit is not in use when disassembling, and cleaning. Children are prohibited from using this product.
- Please turn off the switch and disconnect the power before replacing accessories, or touching moving parts.
- This product is designed for household use only. If this product is used improperly, with professional or semi-professional purposes, or the user does not follow the instructions, the warranty of this product will be invalid, and the company will not be responsible for the losses caused thereby.
Read Instructions
Before Operating
MADE IN CHINA
PATENT PENDING
Rev:091721
VIATEKPRODUCTS.COM
For questions, assistance, or replacement pads, do not return to your
retailer. Contact Viatek° customer service below. For refunds on items not
purchased from Viatele directly, please contact your retailer.
VIATEK® 1-YEAR LIMITED WARRANTY
Viatek warrants this product to be free of manufacturing defects. Should any
such defect develop or become evident within one year from the date of
purchase, Viatee will replace the entire product or, at its option, repair or
replace the defective part(s) without charge. Contact Viatele customer service
at 888.784.2835 or at cs@viatek.com to determine
whether it is necessary to return the unit. To return, securely pack the
entire unit. Be sure the carton clearly identifies the sender by name and
address. Attach a letter or card describing the defect and the original sales
receipt. Mail prepaid to Viatek Consumer Products Group, Inc. 6011 Century
Oaks Dr. Chattanooga, TN 37416. This warranty is void if damage or malfunction
is due to abuse or failure to operate the product in accordance with
instructions and on recommended electrical current. This warranty gives you
specific legal rights and you may also have other rights which vary from state
to state. If you have any questions or would like to learn more about Viatek.
please contact us at 888.784.2835 or at
cs@viatek.com. Register your product online at
viatekproducts.com/register-your-product-
warranty/
** Customer Service
888384.2835
(+1.423.402.9010)
cs@viatek.com
Model: MFC-45**
DO NOT DISPOSE OF BATTERIES IN FIRE. ALWAYS DISPOSE OF BATTERIES PER LOCAL & FEDERAL GUIDELINES.
C2020 VIATEK CONSUMER PRODUCTS GROUP, INC.
All specifications are subject to change without notice. All rights reserved.
Viatek Consumer Products Group, Inc. 6011 Century Oaks Dr. Chattanooga, TN
37416
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>