ABBA CDR75 Cast Aluminum Spot Light Installation Guide
- May 15, 2024
- ABBA
Table of Contents
ABBA CDR75 Cast Aluminum Spot Light
Product Information
Specifications :
- Model: CDR75
- Rated Voltage: 12 AC/DC
- Warranty: 2 years from the date of purchase
- Usage: Low voltage landscape lighting
- Maximum Power: 25A, 15V
Product Usage Instructions
Safety Instructions:
For your safety, please follow these important safety instructions:
- Do not touch the hot lens, guard, or enclosure of the lamp.
- Avoid placing the lamp near materials that may burn.
- Only qualified persons should install this electrical product.
- Ensure all power connections are off before installation.
Installation Instructions:
- Ensure the light cable wires input are 12v AC/DC.
- Turn off power before installation.
- Attach the fixture wires to the main cable connector using waterproof wire nuts (WN12 – sold separately).
- Bury the main cable from power units for less than 6 inches under the ground level.
- Insert the spike into the ground for firm vertical mounting.
- Adjust the light angle as needed.
- Turn on power after installation is complete.
FAQ
-
Q: What should I do if the lamp gets too hot?
A: Do not touch the hot parts of the lamp. Use a soft cloth for handling. -
Q: Can the fixture(s) be installed near water bodies?
A: No, do not install within 10 feet of a pool, spa, or fountain.
CDR75
INSTALLATION GUIDE
www.ABBALightingUSA.com
RATED VOLTAGE 12 AC/DC
Thank you for purchasing this quality product. To ensure correct function and
safety, Please read and follow all instructions carefully before assembly,
installation and before using this product.
IMPORTANT SAFETY INSTRUNCTIONS
LIGHTEN LAMP IS HOT!
WARNING: TO REDUCE THE RIS K OF FIRE OR INJURY TO PERSONS:
- Lamp gets HOT quickly!
- Do not touch HOT lens, guard or enclosure.
- Keep lamp away from materials that may burn.
- Do not touch the lamp any time. Use soft cloth.
- It is recommended only qualified persons to install this electrical product.
- Before attempting to install this unit, ensure all power connections are off for your own safety.
WARRANTY
- This fixture is covered by a 2 year warranty. The warranty is from the date of purchase, not the date of installation. Please keep the proof of purchase
- Warranty will be void if there is any damage due to improper usage or modification to the fixture.
- Failure to comply with the instruction in this manual may increase the risk of damage or injury and will void warranty.
CAUTION:
- fixture(s) must be installed in accordance with all local codes and ordinances.
- Do not install within 10 feet of a pool, spa or fountain
INSTALLATION INSTRUCTION
Fixture(s) should be used “ONLY” with low voltage landscape power units that
do not exceed 25A, 15V.
The main cable from power units should be buried for less than 6 inches under
the ground level.
- Please ensure the light cable wires input are 12v ac/dc.
- Turn off power before installation.
- Attach the fixture(s) wires to the main cable connector suitable for direct burial. Use waterproof wire nuts. WN12 (Sold separately).
- Put the spike into the ground. Try to make firm vertical mounting.
- Adjust the light angle.
- Turn on power.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>