elo SEL 19.5 Inch Touchscreen Monitor Kit Instruction Manual

: June 12, 2024
: elo

Table of Contents

elo SEL 19.5 Inch Touchscreen Monitor Kit
Product Information
Product Usage Instructions
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)
2 Phillips screwdriver

elo SEL 19.5 Inch Touchscreen Monitor Kit

elo-SEL-19.5-Inch-Touchscreen-Monitor-Kit-product

Product Information

This kit includes all the components necessary to install the included Elo 19.5 touchscreen monitor into a standard 19 rack While following these installation instructions, ensure the touchscreen monitor is always safely supported by hand until all fasteners are installed. We recommend having a second person to assist with the installation. The following items are included in the kit:

19.5″ touchscreen monitor (includes mounting screws and USB, VGA, and DVI cables)
DisplayPort cable
Power supply
Line cord (North America, NEMA 5-15)
19″ rack-mount bracket/bezel
Power supply bracket with four M4x6 mm screws

Tools and Supplies Required (Not Included in the Kit)

2 Phillips screwdriver
Four mounting screws for your 19 rack
Cable ties
Optional for hardwired power connection: wire cutter, stripper, crimper tools, and crimp terminals

Product Usage Instructions

Unpack the touchscreen monitor, rack-mount bezel, and power supply bracket, and place them face-down on a clean, flat, and smooth work surface.
Install the rack-mount bezel onto the 19 racks by using the proper screws and fasteners for your rack (not provided).
Note: Refer to Figure 1 in the user manual for visual instructions.
Align the power supply bracket with the VESA mounting holes on the back of the touchscreen monitor, and use the supplied M4x6 mm screws to attach the bracket.
Note: Refer to Figure 2 in the user manual for visual instructions.
Align the touchscreen monitor with the opening in the rack-mount bezel. Tip the touchscreen monitor slightly and set the bottom edge into the bezel, flush with the face of the bezel. Some resistance is normal because the foam gasket on the perimeter of the touchscreen monitor must compress to fit into the bezel.
Starting at the bottom and working toward the top, carefully press along the perimeter of the touchscreen monitor to slide it gradually and evenly into the bezel until it is flush with the face of the bezel.
Adjust the touchscreen monitor position to align the screw holes on the four sides of the rack-mount bezel with the screw holes in the touchscreen monitor. Use eight of the screws supplied with the touchscreen monitor to fasten it.
Note: Refer to Figure 3 in the user manual for visual instructions.
Connect the power supply output cable to the input power connector on the touchscreen monitor (see Table 1 for hardwired connec-tions). Secure the power supply and cables to the power supply bracket by using cable ties (not provided).
Note: For hardwired power connections, cut the NEMA 5-15 plug off of the line cord, strip approximately 2 inches of the outer cable jacket to expose the wires, crimp appropriate terminals onto the wires, and connect to the power source, as indicated in Table 1. Wire Color| Connection (AC/DC)
---|---
Black| Hot/positive (+)
White| Neutral/negative (-)
Green| Ground
Connect the touchscreen monitor to the computer by using the included display and USB cables. Connect the supplied on-screen display (OSD) remote to the RJ45 port on the rear of the touchscreen monitor.
Turn on the computer and verify that the touchscreen monitor operates correctly. If the image is distorted and/or not centered on the screen, use the OSD remote controls to adjust the display (see the User Guide included with the touchscreen monitor for details).
Optionally, for additional touchscreen functions and calibration, download and install the touchscreen drivers and software from elotouch.com.

Table 1 – Hardwired Power Connections Power Source| Wire Color| Terminal Type| Terminal Size| Terminal Part Number
---|---|---|---|---
Line| Black| Ring| 1/4″| P/N 999999-0000
Neutral| White| Ring| 1/4″| P/N 999999-0001
Ground| Green| Fork| 1/4″| P/N 999999-0002

Specifications

Temperature Range: 0° to 40° C (0° to 104° F) operating –20° to +60° C (-4° to +140° F) storage
Power Supply Input Voltage: 120/240 Vac, 50/60 Hz 125/250 Vdc*
Note: Power supply labeling may only indicate Vac range. SEL has worked closely with the manufacturer to verify compatibility with both ac and dc power sources.

Touchscreen Monitor

Model: Elo 2094L, PCAP, P/N E331214
Display : 19.5″ diagonal 16:9 (widescreen), active matrix TFT LCD (LED)
Resolution : 1920 x 1080 @ 60 Hz
Brightness : 225 nits
Input Power : 12 Vdc, 17 W
Video Inputs: HDMI, VGA, DisplayPort
Touch Interface: USB
Cables Included: HDMI, VGA, USB, RJ45 OSD remote
MTBF: 50,000 hours
Details: https://www.elotouch.com/open-frame-touchscreens-2094l.html

Warranty
The touchscreen monitor carries the manufacturer’s 3-year warranty. Contact the manufacturer, Elo Touch Solutions, for the warranty.

Technical Support
We appreciate your interest in SEL products and services. If you have questions or comments, please contact us at: Schweitzer Engineering Laboratories, Inc. 2350 NE Hopkins Court Pullman, WA 99163-5603 U.S.A.

Tel : +1.509.338.3838
Fax : +1.509.332.7990
Internet : selinc.com/support
Email : info@selinc.com

WARNING
Operator safety may be impaired if the device is used in a manner not specified by SEL.

CAUTION
Equipment components are sensitive to electrostatic discharge (ESD). Undetectable permanent damage can result if you do not use proper ESD procedures. Ground yourself, your work surface, and this equipment before removing any cover from this equipment. If your facility is not equipped to work with these components, contact SEL about returning this device and related SEL equipment for service. 2023 by Schweitzer Engineering Laboratories, Inc. All rights reserved.

All brand or product names appearing in this document are the trademark or registered trademark of their respective holders. No SEL trademarks may be used without written permission.
SEL products appearing in this document may be covered by U.S. and Foreign patents. Schweitzer Engineering Laboratories, Inc. reserves all rights and benefits afforded under federal and international copyright and patent laws in its products, including without limitation software, firmware, and documentation.
The information in this document is provided for informational use only and is subject to change without notice. Schweitzer Engineering Laboratories, Inc. has approved only the English language document.

SCHWEITZER ENGINEERING LABORATORIES, INC.