jura 68116 Stainless Steel Vacuum Milk Container Instruction Manual
- June 12, 2024
- Jura
Table of Contents
jura 68116 Stainless Steel Vacuum Milk Container
Product Information
The stainless steel vacuum milk container is a durable and efficient container designed for storing and dispensing milk. It is available in two sizes, with fill volumes of 0.4 liters and 0.6 liters. The container is made of high- quality stainless steel material, ensuring its longevity and resistance to heat sources.
Important Information
- Always store the container open when not in use to prevent health risks and damage.
- Avoid filling the container with ice cubes or carbonated liquids.
- Do not continuously refill the container with milk, as it may go sour over time.
- If there is leftover milk in the container after use, transfer it to another receptacle.
- Do not wash the stainless steel vacuum milk container and its individual parts in the dishwasher.
- Protect the container from direct sources of heat.
First-time Use
- Rinse the stainless steel vacuum milk container thoroughly before using it for the first time.
- If desired, use the long milk pipe to position the milk container further away from the machine. Alternatively, you can cut the pipe into three replacement pipes, each measuring 120 mm in length.
- Assemble the milk pipe (1), connector (2), and black rubber seal (3), then connect them to the cover (4).
- Insert the transparent rubber seal (6) into the cover (5).
- Insert the straight side of the metal pipe (7) into the rubber seal (6).
- Fill the container with milk and close the cover. The closed container will keep the milk cool for approximately 8 hours.
- Connect the milk pipe (1) to your coffee machine by attaching the end of the milk pipe (without the connector) to the connector provided with your coffee machine.
Cleaning and Maintenance
- Do not use harsh or abrasive cleaning agents or hard objects that may damage the coating of the stainless steel vacuum milk container.
- For hygiene purposes, it is recommended to change the milk pipe approximately every 3 months. Replacement pipes can be obtained from specialized dealers.
- Rinse the stainless steel vacuum milk container and its individual parts thoroughly under running water.
- If there are stubborn milk residues, immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
Stainless steel vacuum milk container
WARNING: These instructions apply to stainless steel vacuum milk containers with fill volumes of 0.4 l and 0.6 l.
Important information
Proper use
The stainless steel vacuum milk container is designed to keep milk cool. Use
for any other purpose will be deemed improper. JURA cannot accept any
responsibility for the consequences of improper use. Before using the con-
tainer read these instructions for use thoroughly and completely and comply
with the instructions they contain. A warranty service is not applicable for
damage or defects caused by non-compliance with the instructions for use. Keep
these instructions for use close to the container and pass them on to the next
user.
For your safety
To prevent a health risk and damage to the container:
- Always store the container open when not in use.
- Do not fill the container with ice cubes or carbonated liquids.
- Do not keep filling the container with milk. Milk that has been in the container for a long time can go sour.
- If there is still milk in the container after use, store the milk in another receptacle, not in this container.
- Do not wash the stainless steel vacuum milk container and individual parts in the dishwasher.
- Protect the container from sources of heat.
**First-time use
**
- Rinse the stainless steel vacuum milk container thoroughly before using it for the first time.
- Using the long milk pipe allows you to position the milk container further away from the machine. You can however cut the pipe to make three replacement pipes, each 120 mm in length.
- Assemble the milk pipe (1), the connector (2) and the black rubber seal (3) and connect the parts to the cover (4).
- Insert the transparent rubber seal (6) into the cover (5).
- Then insert the straight side of the metal pipe (7) into the rubber seal (6). T Fill the container with milk and close the cover. The closed container will keep the milk cool for about 8 hours.
- Connect the milk pipe (1) to your coffee machine. To do this, attach the end of the milk pipe (without the connector) to the connector supplied with your coffee machine.
Cleaning and maintenance
- Do not use harsh or abrasive cleaning agents or hard objects for cleaning. These can damage the coating of the stainless steel vacuum milk container.
- In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approx. every 3 months). Replacement pipes are available from specialised dealers.
- T Rinse the stainless steel vacuum milk container and individual parts thoroughly under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>