JVC KD-R992BT CD Receiver Instruction Manual

: June 17, 2024
: JVC

Table of Contents

JVC KD-R992BT CD Receiver
Product Information
Product Usage Instructions
Getting Started
Frequently Asked Questions (FAQ)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JVC KD-R992BT CD Receiver

JVC-KD-R992BT-CD-Receiver

Product Information

Specifications

Product Model: KD-R992BT / KD-R899BT / KD-R891BT / KD-R794BT / KD-R792BT
Type: CD Receiver

Product Usage Instructions

Before Use

Cancel the demonstration:

Press and hold the [SEL] button to enter the menu.
Turn the volume knob to select “DEMO,” and then press the volume knob.
Turn the volume knob to select “DEMO OFF,” and then press the volume knob.
Press the [SEL] button to exit the menu.

Basics

To use the CD receiver, follow these basic steps:

Installation: Mount the CD receiver in your vehicle following the instructions provided in the installation manual.
Power On/Off: Press the [SRC] button to turn on/off the CD receiver.
Volume Control: Rotate the volume knob clockwise or counterclockwise to adjust the volume level.
Source Selection: Press the [SRC] button to select the desired audio source (CD, USB, Bluetooth, etc.).
Tuning: Use the seek/track buttons or turn the tuning knob to navigate through radio stations or tracks on a CD.
Audio Settings: Access the audio settings menu by pressing and holding the [SEL] button. Use the volume knob to make adjustments.

Getting Started

Follow these steps to get started with the CD receiver:

Connect the CD receiver to a power source according to the provided instructions.
Connect your audio sources (CD player, USB device, etc.) to the CD receiver using the appropriate cables.
Turn on the CD receiver by pressing the [SRC] button.
Select the desired audio source using the [SRC] button.
Adjust the volume level using the volume knob.
You are now ready to enjoy your music!

Frequently Asked Questions (FAQ)

Q: How do I pair my smartphone with the CD receiver via Bluetooth?
A: To pair your smartphone with the CD receiver via Bluetooth, follow these steps:

Press the [SRC] button to select the Bluetooth audio source.
Enable Bluetooth on your smartphone and make it discoverable.
On the CD receiver, press and hold the [PAIRING] button until the Bluetooth indicator starts flashing.
On your smartphone, search for available Bluetooth devices and select “KD-R992BT” (or corresponding model).
Enter the PIN code displayed on the CD receiver into your smartphone when prompted.
Your smartphone is now paired with the CD receiver. You can play music wirelessly via Bluetooth.

Q: How do I change the display color of the CD receiver?
A: To change the display color of the CD receiver, follow these steps:

Press and hold the [SEL] button to enter the menu.
Turn the volume knob to select “DISPLAY,” and then press the volume knob.
Turn the volume knob to select “COLOR,” and then press the volume knob.
Turn the volume knob to select the desired color, and then press the volume knob.
Press the [SEL] button to exit the menu.

KD-R992BT / KD-R899BT / KD-R891BT / KD-R794BT / KD-R792BT

B5A-2126-10 [E]

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama- shi, Kanagawa, 221-0022, JAPAN EU Representative: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
Declaración de conformidad con respecto a la Directiva RE 2014/53/EU Declaración de conformidad con respecto a la Directiva RoHS 2011/65/EU Fabricante: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama- shi, Kanagawa, 221-0022, JAPAN Representante en la UE: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese Unie (2014/53/EU) Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese Unie (2011/65/EU) Fabrikant: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN EU- vertegenwoordiger: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
Declaração de conformidade relativa à Directiva RE 2014/53/EU Declaração de conformidade relativa à Directiva RoHS 2011/65/EU Fabricante: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Representante na UE: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
iii

English Hereby, JVCKENWOOD declares that the radio equipment “KD-R992BT/KD- R899BT/KD-R891BT/KD-R794BT/ KD-R792BT” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.jvc.net/cs/car/eudoc/
Français Par la présente, JVCKENWOOD déclare que l’équipement radio « KD- R992BT/KD-R899BT/KD-R891BT/KD-R794BT/ KD-R792BT » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.jvc.net/cs/car/eudoc/
Deutsch Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KD-R992BT/KD-R899BT /KD-R891BT/KD-R794BT/ KD-R792BT” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.jvc.net/cs/car/eudoc/
Nederlands Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KD-R992BT/KD- R899BT/KD-R891BT/KD-R794BT/ KD-R792BT” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.jvc.net/cs/car/eudoc/
Italiano Con la presente, JVCKENWOOD dichiara che lapparecchio radio “KD- R992BT/KD-R899BT/KD-R891BT/KD-R794BT/ KD-R792BT” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.jvc.net/cs/car/eudoc/

Español Por la presente, JVCKENWOOD declara que el equipo de radio “KD-R992BT /KD-R899BT/KD-R891BT/KD-R794BT/ KD-R792BT” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.jvc.net/cs/car/eudoc/
Português Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KD- R992BT/KD-R899BT/KD-R891BT/KD-R794BT/ KD-R792BT” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.jvc.net/cs/car/eudoc/
Polska Niniejszym, JVCKENWOOD deklaruje, e sprzt radiowy “KD-R992BT/KD-R899BT /KD-R891BT/KD-R794BT/ KD-R792BT” jest zgodny z dyrektyw 2014/53/UE. Pelny tekst deklaracji zgodnoci EU jest dostpny pod adresem: http://www.jvc.net/cs/car/eudoc/
Ceský Spolecnost JVCKENWOOD tímto prohlasuje, ze rádiové zaízení “KD-R992BT /KD-R899BT/KD-R891BT/KD-R794BT/ KD-R792BT” spluje podmínky smrnice 2014/53/EU. Plný text EU prohlásení o shod je dostupný na následující internetové adrese: http://www.jvc.net/cs/car/eudoc/
Magyar JVCKENWOOD ezennel kijelenti, hogy a ,,KD-R992BT/ KD-R899BT/KD-R891BT /KD-R794BT/KD-R792BT” rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhet el: http://www.jvc.net/cs/car/eudoc/

Svenska Härmed försäkrar JVCKENWOOD att radioutrustningen “KD-R992BT/KD- R899BT/ KD-R891BT/KD-R794BT/KD-R792BT” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress : http://www.jvc.net/cs/car/eudoc/
Suomi JVCKENWOOD julistaa täten, että radiolaite “KD-R992BT/KD-R899BT/KD- R891BT/KD-R794BT/ KD-R792BT” on direktiivin 2014/53/EU mukainen. EU- vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.jvc.net/cs/car/eudoc/
Slovensko S tem JVCKENWOOD izjavlja, da je radijska oprema »KD-R992BT/KD- R899BT/KD-R891BT/KD-R794BT/ KD-R792BT« v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.jvc.net/cs/car/eudoc/
Slovensky Spolocnos JVCKENWOOD týmto vyhlasuje, ze rádiové zariadenie ,,KD- R992BT/KD-R899BT/ KD-R891BT/KD-R794BT/KD-R792BT” vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.jvc.net/cs/car/eudoc/

Dansk Herved erklærer JVCKENWOOD, at radioudstyret “KD-R992BT/KD-R899BT/KD- R891BT/KD-R794BT/ KD-R792BT” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.jvc.net/cs/car/eudoc/
, JVCKENWOOD «KD-R992BT/KD-R899BT/ KD-R891BT/KD-R794BT/KD-R792BT» 2014/53/. : http://www.jvc.net/cs/car/eudoc/
Eesti Käesolevaga JVCKENWOOD kinnitab, et ,,KD-R992BT/KD-R899BT/KD-R891BT/KD- R794BT/ KD-R792BT” raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.jvc.net/cs/car/eudoc/
Latviesu JVCKENWOOD ar so deklar, ka radio aparatra ,,KD-R992BT/KD-R899BT/KD- R891BT/KD-R794BT/ KD-R792BT” atbilst direktvas 2014/53/ES prasbm. Pilns ES atbilstbas deklarcijas teksts ir pieejams sd tmeka adres: http://www.jvc.net/cs/car/eudoc/

Lietuviskai Siuo JVCKENWOOD pazymi, kad radijo ranga ,,KD-R992BT/KD-R899BT/KD- R891BT/KD-R794BT/ KD-R792BT” atitinka 2014/53/EB direktyvos reikalavimus. Vis EB direktyvos atitikties deklaracijos tekst galite rasti siuo internetiniu adresu: http://www.jvc.net/cs/car/eudoc/
Malti B’dan, JVCKENWOOD jiddikjara li t-tagmir tar-radju “KD-R992BT/KD-R899BT /KD-R891BT/ KD-R794BT/KD-R792BT” huwa konformi madDirettiva 2014/53/UE. It- test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ej: http://www.jvc.net/cs/car/eudoc/
HRVATSKI / SRPSKI JEZIK JVCKENWOOD ovim izjavljuje da je radio oprema “KD- R992BT/KD-R899BT/KD-R891BT/KD-R794BT/ KD-R792BT” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklaenosti dostupan je na sljedeoj internet adresi: http://www.jvc.net/cs/car/eudoc/
ROMÂN Prin prezenta, JVCKENWOOD declar c echipamentul radio “KD-R992BT/KD- R899BT/ KD-R891BT/KD-R794BT/KD-R792BT” este în conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei de conformitate UE este disponibil la urmatoarea adres de internet: http://www.jvc.net/cs/car/eudoc/

JVCKENWOOD , “KD-R992BT/KD-R899BT/ KD-R891BT/KD-R794BT/KD-R792BT” 2014/53/. : http://www.jvc.net/cs/car/eudoc/
Turkish Burada, JVCKENWOOD “KD-R992BT/KD-R899BT/ KD-R891BT/KD-R794BT/KD- R792BT” radyo ekipmaninin 2014/53/AB Direktifine uygun olduunu bildirir. AB uyumluluk deklarasyonunun tam metni aaidaki internet adresinde mevcuttur. http://www.jvc.net/cs/car/eudoc/
JVCKENWOOD , «KD-R992BT/KD-R899BT/ KD-R891BT/KD-R794BT/KD-R792BT» 2014/53/EU. : http://www.jvc.net/cs/car/eudoc/
, JVCKENWOOD , «KD-R992BT/KD-R899BT/ KD-R891BT/KD-R794BT/KD-R792BT» 2014/53/EU. : http://www.jvc.net/cs/car/eudoc/

CONTENTS

BEFORE USE

BASICS

GETTING STARTED

1 Cancel the demonstration

2 Set the clock and date

3 Set the basic settings

RADIO

AUX

CD/USB/iPod/ANDROID

Spotify

BLUETOOTH®

AUDIO SETTINGS

DISPLAY SETTINGS

REFERENCES

Maintenance

More information

TROUBLESHOOTING

INSTALLATION/

CONNECTION

SPECIFICATIONS

2 ENGLISH

BEFORE USE
IMPORTANT · To ensure proper use, please read through this manual before using this product. It is especially important
that you read and observe Warning and Caution in this manual. · Please keep the manual in a safe and accessible place for future reference.
Warning · Do not operate any function that takes your attention away from safe driving.
Caution Volume setting: · Adjust the volume so that you can hear sounds outside the car to prevent accidents. · Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level. General: · Avoid using the external device if it might hinder safe driving. · Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data. · Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short
circuit. · If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
How to read this manual · Operations are explained mainly using buttons on the faceplate of KD-R992BT and KD-R891BT. · English indications are used for the purpose of explanation. You can select the display language from the
menu. ( 6) · [XX] indicates the selected items. · ( XX) indicates references are available on the stated page.

BASICS
Faceplate for KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT

Display window

Attach

Loading slot

KD-R899BT/KD-R794BT/KD-R792BT

Detach

Source button

Detach button

Volume knob

How to reset

Reset the unit within 5 seconds after detaching the faceplate.

To Turn on the power Adjust the volume
Select a source Change the display information Select an item

On the faceplate

Press

· Press and hold to turn off the power.

Turn the volume knob.

Press the volume knob to mute the sound or pause playback. · Press again to cancel. The volume level returns to the previous level before muting or pause.

· Press · Press

repeatedly. , then turn the volume knob within 2 seconds.

Press

repeatedly. ( 29, 30)

1 Turn the volume knob to select an item. 2 Press the knob to confirm.

ENGLISH 3

BASICS
Faceplate for KD-R891BT
Source button

Loading slot

Display window

Attach Detach

Detach button

How to reset

Reset the unit within 5 seconds after detaching the faceplate.

To Turn on the power Adjust the volume
Select a source Change the display information Select an item 4 ENGLISH

On the faceplate

Press

· Press and hold to turn off the power.

Press

· Press and hold

to continuously increase the volume to 15.

Press

to mute the sound or pause playback.

· Press again to cancel. The volume level returns to the previous level before muting or pause.

· Press · Press

repeatedly. , then press

within 2 seconds.

Press

repeatedly. ( 29, 30)

1 Press 2 Press

to select an item. to confirm.

GETTING STARTED

For key layout on the faceplate, see page 3 or page 4.

1 Cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to [YES]), the display shows:
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1 Press the volume knob. [YES] is selected for the initial setup.
2 Press the volume knob again. “DEMO OFF” appears.

KD-R891BT:

“CANCEL DEMO” “PRESS ENTER”

1 Press

[YES] is selected for the initial setup.

2 Press

again.

“DEMO OFF” appears.

2 Set the clock and date

1 Press and hold

2 Perform `select an item ( 3 or 4)’ operation to select [CLOCK].

3 Perform `select an item ( 3 or 4)’ operation to adjust the clock.

[CLOCK ADJUST] set the hour and minute [CLOCK FORMAT] [12H] or [24H]

4 Perform `select an item ( 3 or 4)’ operation to set the date.

[DATE SET] set the day, month and year

5 Press

to exit.

To return to the previous setting item, press

3 Set the basic settings

1 Press and hold

2 Perform ‘select an item ( 3 or 4)’ operation to select an

item (see the following table).

3 Repeat step 2 until the desired item is selected or activated.

4 Press

to exit.

To return to the previous setting item, press

Default: XX

SYSTEM

KEY BEEP

(Not applicable when 3-way crossover is selected.) ON: Activates the keypress tone. ; OFF: Deactivates

SOURCE SELECT

AM SRC*

ON: Enables AM in source selection. ; OFF: Disables. ( 6)

SPOTIFY SRC* ON: Enables SPOTIFY in source selection. ; OFF: Disables. ( 11)

BUILT-IN AUX* ON: Enables AUX in source selection. ; OFF: Disables. ( 8)

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: http://www.jvc.net/cs/car/.

FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.

Not displayed when the corresponding source is selected.

ENGLISH 5

GETTING STARTED

CLOCK

TIME SYNC

ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Data System signal. ; OFF: Cancels.

CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels.

ENGLISH ESPANOL

Select the display language for menu and music information if applicable. By default, ENGLISH is selected.

RADIO
For key layout on the faceplate, see page 3 or page 4.

Search for a station

1 Press source button repeatedly to select FM or AM.

2 Press

to search for a station automatically.

(or)

Press and hold

until “M” flashes, then press repeatedly to search for a

station manually.

· “ST” or “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Settings in memory You can store up to 18 stations for FM and 6 stations for AM.

Store a station
While listening to a station…. Press and hold one of the number buttons (1 to 6).
(or) 1 Press and hold the following button until “PRESET MODE” flashes.
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: volume knob KD-R891BT:
2 Perform `select an item ( 3 or 4)’ operation to select a preset number. The preset number flashes and “MEMORY” appears.

Select a stored station

Press one of the number buttons (1 to 6).

(or)

1 Press

2 Perform `select an item ( 3 or 4)’ operation to select a preset number.

6 ENGLISH

RADIO

Other settings

1 Press and hold

2 Perform ‘select an item ( 3 or 4)’ operation to select an item

(see the following table). 3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

Default: XX

TUNER SETTING

RADIO TIMER

Turns on the radio at a specific time regardless of the current source. 1 ONCE/DAILY/WEEKLY/OFF: Select how often the timer will be turned
on. 2 FM/AM: Select the band. 3 01 to 18 (for FM)/01 to 06 (for AM): Select the preset station. 4 Set the activation day*1 and time. “” lights up when complete.
Radio Timer will not activate for the following cases. · The unit is turned off. · [OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer for
AM is selected. ( 5)

SSM

SSM 0106/SSM 0712/SSM 1318: Automatically presets up to 18

stations for FM. “SSM” stops flashing when the first 6 stations are stored.

Select SSM 0712/SSM 1318 to store the following 12 stations.

LOCAL SEEK

ON: Searches only FM stations with good reception. ; OFF: Cancels. · Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.

IF BAND

AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain.

MONO SET

ON: Improves the FM reception, but the stereo effect will be lost. ; OFF: Cancels.

NEWS SET*2 ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.

REGIONAL*2 ON: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.

AF SET*2

ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; OFF: Cancels.

ON: Allows the unit to temporarily switch to Traffic Information if available

(“TI” lights up) while listening to all sources except in AM. ; OFF: Cancels.

PTY SEARCH*2 Select a PTY code (see below). If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in.

1 Selectable only when [ONCE] or [WEEKLY] is selected in step 1. 2 Only for FM source.

PTY code NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT

ENGLISH 7

AUX
Use a portable audio player 1 Connect a portable audio player (commercially available).
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: 3.5 mm stereo mini plug with “L” shaped connector (commercially available)
Portable audio player
Auxiliary input jack KD-R891BT:
Auxiliary input jack
Portable audio player

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

CD KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: KD-R891BT:

Eject disc

Label side

Eject disc

Label side

USB input terminal
KD-R992BT/ KD-R899BT/ KD-R794BT/ KD-R792BT

USB USB 2.0 cable*1 (commercially available) iPod/iPhone

3.5 mm stereo mini plug with “L” shaped connector (commercially available)
2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 5) 3 Press source button repeatedly to select AUX. 4 Turn on the portable audio player and start playback.

USB input terminal KD-R891BT

Accessory of the iPod/iPhone1 ANDROID2

Use a 3-core plug head stereo mini plug for optimum audio output.
8 ENGLISH

USB cable1 (commercially available)
1 Do not leave the cable inside the car when not using. *2 When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown.
Follow the instructions to install the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting. For more information, visit http://www.jvc.net/cs/car/.

CD/USB/iPod/ANDROID

For key layout on the faceplate, see page 3 or page 4.

· Selectable sources:

KD-R992BT/KD-R899BT/KD-R891BT: CD/USB/iPod USB/ANDROID

KD-R794BT/KD-R792BT:

CD/USB/ANDROID

On the faceplate

Reverse/

Press and hold

Fast-forward*3

Select a track/ Press

file

Select a folder*4 Press

Repeat play*5

Press repeatedly.

TRACK REPEAT/ALL REPEAT

: Audio CD

TRACK REPEAT/FOLDER REPEAT/ALL REPEAT : MP3/WMA/AAC/WAV/

FLAC file

ONE REPEAT/ALL REPEAT/REPEAT OFF : iPod or ANDROID

Random play*5

Press repeatedly.

ALL RANDOM/RANDOM OFF

: Audio CD

FOLDER RANDOM/ALL RANDOM/RANDOM OFF : MP3/WMA/AAC/WAV/

FLAC file

SONG RANDOM/ALL RANDOM/RANDOM OFF : iPod or ANDROID

3 For ANDROID: Applicable only when [AUTO MODE] is selected. 4 For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID. *5 For iPod/ANDROID: Applicable only when [HEAD MODE]/[AUTO MODE] is selected.

Select control mode

While in iPod USB source, press

repeatedly.

HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you
can still play/pause or file skip from this unit.

While in ANDROID source, press

repeatedly.

AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device.
AUDIO MODE: Control Android device using the Android device itself via other media player applications installed in the Android device. However, you can still play/pause or file skip from this unit.

Select music drive

While in USB source, press

repeatedly.

Stored songs in the following drive will be played back. · Selected internal or external memory of a smartphone (Mass

Storage Class). · Selected drive of a multiple drives device.

ENGLISH 9

CD/USB/iPod/ANDROID
Settings to use JVC Remote application (for KD-R992BT/KD-R899BT/KD-R891BT)
JVC Remote application is designed to control the JVC car receiver’s operations from the iPhone/iPod (via USB input terminal). Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit http://www.jvc.net/cs/car/. You can make the settings in the same way as connection via Bluetooth. ( 19)

Select a file from a folder/list

For iPod/ANDROID, applicable only when [HEAD MODE]/[AUTO MODE] is

selected.

1 Press

2 Perform `select an item ( 3 or 4)’ operation to select a folder/

list. 3 Perform `select an item ( 3 or 4)’ operation to select a file.

Quick search (applicable only for CD, USB and ANDROID source) If you have many files, you can search through them quickly.

Perform the following operation to browse through the list quickly.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: Turn the volume knob quickly

KD-R891BT:

Press and hold

Alphabet search (applicable only for iPod USB and ANDROID source) You can search for a file according to the first character.

For iPod USB source Perform the following operation to select the desired character (A to Z, 0 to 9, OTHERS).

KD-R992BT/KD-R899BT: Press

quickly

KD-R891BT:

Press

or turn the volume knob

· Select “OTHERS” if the first character is other than A to Z, 0 to 9.

For ANDROID source

1 Press

to enter character search.

2 Perform the following operation to select the desired

character.

KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: KD-R891BT:

Turn the volume knob Press

^A^

-0-

-OTHERS- :

Upper case (A to Z) Lower case (a to z) Numbers (0 to 9) Character other than A to Z, 0 to 9

3 Press the following to start searching.

KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: KD-R891BT:

volume knob

· To return to the previous setting item, press

· To cancel, press and hold

10 ENGLISH

Spotify

Preparation: Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify. · Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 5)
KD-R794BT/KD-R792BT: You can only listen to Spotify via Bluetooth connection with an Android device. ( 20)
Start listening 1 Open the Spotify application on your device. 2 Connect your device to the USB input terminal.
KD-R992BT/KD-R899BT: USB input terminal Accessory of the iPod/iPhone*

KD-R891BT: USB input terminal

Accessory of the iPod/iPhone*

3 Press source button repeatedly to select SPOTIFY. Broadcast starts automatically

Do not leave the cable inside the car when not using.

To Playback/pause
Skip a track Thumbs up or thumbs down 2 Start radio Repeat play3
Random play*3

On the faceplate

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Press the volume knob.

KD-R891BT: Press

Press S*1 / T.

Press

Press and hold 5.

Press

repeatedly.

ALL REPEAT, ONE REPEAT*1, REPEAT OFF

Press

repeatedly *1.

ALL RANDOM, RANDOM OFF

1 Available for premium account users only. 2 This feature is available for tracks in Radio only. If thumbs down is selected, the current
track is skipped. *3 Available for tracks in Playlists only.

Save favorite song information
While listening to the Radio on Spotify…
Press and hold the following button to save the song information. KD-R992BT /KD-R899BT/KD-R794BT/KD-R792BT: volume knob KD-R891BT:
“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.
To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

ENGLISH 11

Spotify

Search for a song or station

1 Press

2 Perform `select an item ( 3 or 4)’ operation to select a list

type.
The list types displayed differ depending on the information sent
from Spotify. 3 Perform `select an item ( 3 or 4)’ operation to select the

desired song or station.

Perform the following operation to browse through the list quickly.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT:

Turn the volume knob quickly

KD-R891BT:

Press and hold

To cancel, press and hold

BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles Hands-Free Profile (HFP) Advanced Audio Distribution Profile (A2DP) Audio/Video Remote Control Profile (AVRCP) Serial Port Profile (SPP) Phonebook Access Profile (PBAP) Supported Bluetooth codecs Sub Band Codec (SBC) Advanced Audio Coding (AAC)
Connect the microphone

Rear panel

Microphone input jack

Microphone (supplied)

12 ENGLISH

Adjust the microphone angle

Secure using cord clamps (not supplied) if necessary.

BLUETOOTH®
Pair and connect a Bluetooth device for the first time
1 Press source button to turn on the unit. 2 Search and select “KD-R9 BT”/”KD-R8 BT”/”KD-R7 BT” on the Bluetooth device.
“BT PAIRING” flashes on the display. · For some Bluetooth devices, you may need to enter the Personal Identification Number
(PIN) code immediately after searching. 3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below. (A) KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:
“[Device Name]” “XXXXXX” “VOL YES” “BACK NO” KD-R891BT: “[Device Name]” “XXXXXX” “ENTER YES” “BACK NO” “XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device are the same. Press the following operation to confirm the passkey. KD-R992BT/KD-R899BT/KD- R794BT/KD-R792BT: volume knob KD-R891BT: Operate the Bluetooth device to confirm the passkey. (B) KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: “[Device Name]” “VOL YES” “BACK NO” KD-R891BT: “[Device Name]” “ENTER YES” “BACK NO” Press the following to start pairing. KD-R992BT/KD-R899BT/KD-R794BT/KD- R792BT: volume knob KD-R891BT: · If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the
Bluetooth device. You can change to a desired PIN code before pairing. ( 17) · If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.
“PAIRING COMPLETED” appears when pairing is completed and ” ” will light up when the Bluetooth connection is established.
· This unit supports Secure Simple Pairing (SSP). · Up to five devices can be registered (paired) in total. · Once the pairing is completed, the Bluetooth device will remain registered in the unit even if
you reset the unit. To delete the paired device, 17, [DEVICE DELETE].

· A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. ( 19)
· Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.
· Refer to the instruction manual of the Bluetooth device for more information.

Auto Pairing

When you connect the following devices to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

KD-R992BT/KD-R899BT/KD-R891BT: iPhone/iPod touch/

Android device

KD-R794BT/KD-R792BT:

Android device

Press the following to pair once you have
confirmed the device name. KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: volume knob KD-R891BT:

Automatic pairing request is activated only if: Bluetooth function of the connected devcie is
turned on. [AUTO PAIRING] is set to [ON]. ( 18) JVC MUSIC PLAY application is installed on
the Android device ( 8) and [AUTO MODE] is selected ( 9).

ENGLISH 13

BLUETOOTH®
BLUETOOTH — Mobile phone For key layout on the faceplate, see page 3 or page 4.
Receive a call
When there is an incoming call: · KD-R992BT:
The buttons will blink in the color you have selected in [RING COLOR]. ( 15) KD-R891BT: The symbolic button will blink in the color you have selected in [RING COLOR]. ( 15) KD-R899BT/KD-R794BT/KD-R792BT: The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 15) · The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 15)
During a call: · KD-R992BT:
The buttons stop blinking and illuminate in the color you have selected in [RING COLOR]. ( 15) KD-R891BT: The symbolic button stop blinking and illuminate in the color you have selected in [RING COLOR]. ( 15) KD-R899BT/KD- R794BT/KD-R792BT: The buttons stop blinking. · If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.

The following operations may differ or not available depending on the connected phone.

On the faceplate

First incoming call…

Answer a call

Press

or the following button.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: volume knob

KD-R891BT:

Reject a call

Press and hold

or the following

button.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: volume knob

KD-R891BT:

End a call

Press and hold

or the following

button.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: volume knob

KD-R891BT:

While talking on the first incoming call…

Answer another incoming Press

or the following button.

call and hold the current call KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: volume knob

KD-R891BT:

Reject another incoming call Press and hold

or the following

button.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: volume knob

KD-R891BT:

14 ENGLISH

BLUETOOTH®

On the faceplate

While having two active calls…

End current call and activate Press and hold

or the following button.

held call

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: volume knob

KD-R891BT:

Swap between the current call and held call
Adjust the phone volume*1 [00] to [35] (Default: [15])

Press .

Perform the following operation during a call.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Turn the volume knob

KD-R891BT: Press

Switch between hands-free Press and private talk modes*3

during a call.

1 This adjustment will not affect the volume of the other sources. 2 Press and hold VOL + to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device.

Improve the voice quality

While talking on the phone….

1 Press and hold

2 Perform `select an item ( 3 or 4)’ operation to select an item (see the

following table).

3 Repeat step 2 until the desired item is selected or activated.

4 Press

to exit.

To return to the previous setting item, press

MIC GAIN NR LEVEL ECHO CANCEL

Default: XX
LEVEL 10 to LEVEL +10 (LEVEL 04): The sensitivity of the microphone increases as the number increased.
LEVEL 05 to LEVEL +05 (LEVEL 00): Adjust the noise reduction level until the least noise is being heard during a phone conversation.
LEVEL 05 to LEVEL +05 (LEVEL 00): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

Make the settings for receiving a call

1 Press

to enter Bluetooth mode.

2 Perform `select an item ( 3 or 4)’ operation to select

an item (see the following table).

3 Repeat step 2 until the desired item is selected or

activated.

To return to the previous setting item, press

SETTINGS AUTO ANSWER RING COLOR
RING ILLUMI

Default: XX
01 SEC to 30 SEC: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels.
KD-R992BT/KD-R891BT: COLOR 01 to COLOR 49 (COLOR 08): Selects the illumination color for the buttons or symbolic button as notification when there is an incoming call and during a call. ; OFF: Cancels.
KD-R899BT/KD-R794BT/KD-R792BT: BLINK 01 to BLINK 05 (BLINK 02): Selects the blinking pattern for the buttons as notification when there is an incoming call. ; OFF: Cancels.

ENGLISH 15

BLUETOOTH®

BATT/SIGNAL*

KD-R992BT/KD-R891BT: AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels.

Functionality depends on the type of the phone used.

Make a call

You can make a call from the call history, phonebook, or dialing the

number. Call by voice is also possible if your mobile phone has the

feature.

1 Press

to enter Bluetooth mode.

“(First device name)” appears.

· If two Bluetooth phones are connected, press

again to switch

to another phone.

“(Second device name)” appears. 2 Perform `select an item ( 3 or 4)’ operation to select an item
(see the following table). 3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

To return to the previous setting item, press

RECENT CALL

(Applicable only if the phone supports PBAP.) 1 Press the following button to select a name or a phone number.
KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: volume knob KD-R891BT: · “<” indicates call received, “>” indicates call made, “M” indicates
call missed. · “NO HISTORY” appears if there is no recorded call history or call
number. 2 Press the following to call.
KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: volume knob KD-R891BT:

PHONEBOOK DIAL NUMBER VOICE

(Applicable only if the phone supports PBAP.)

1 Press

to select the desired letter (A to Z, 0 to 9, and

OTHERS).

· “OTHERS” appears if the first character is other than A to Z, 0 to 9.

2 Perform `select an item ( 3 or 4)’ operation to select a name.

3 Perform `select an item ( 3 or 4)’ operation to select a phone

number and to call.

· The phonebook of the connected phone is automatically transferred to the unit when pairing.
· This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)

1 Perform the following operation to select a number (0 to 9) or character

( , #, +).

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Turn the volume knob

KD-R891BT: Press

2 Press

to move the entry position.

Repeat steps 1 and 2 until you finish entering the phone number.

3 Press the following to call.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

volume knob

KD-R891BT:

Speak the name of the contact you want to call or the voice command to control the phone functions. ( Make a call using voice recognition)

Make a call using voice recognition

1 Press and hold

to activate the connected phone.

2 Speak the name of the contact you want to call or the voice

command to control the phone functions.

· Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.
· This unit also supports the intelligent personal assistant function of iPhone.

16 ENGLISH

BLUETOOTH®

Settings in memory
Store a contact in memory You can store up to 6 contacts into the number buttons (1 to 6).

1 Press

to enter Bluetooth mode.

2 Perform `select an item ( 3 or 4)’ operation to select

[RECENT CALL], [PHONEBOOK] or [DIAL NUMBER]. 3 Perform `select an item ( 3 or 4)’ operation to select a

contact or enter a phone number.

If a contact is selected, press the following to show the phone

number.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: volume knob

KD-R891BT: 4 Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact is

stored.

To erase a contact from the preset memory, select [DIAL NUMBER] in step 2

and store a blank number.

Make a call from memory

1 Press

to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

3 Press the following to call.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: volume knob

KD-R891BT:

“NO PRESET” appears if there is no contact stored.

Bluetooth mode settings

1 Press and hold

2 Perform `select an item ( 3 or 4)’ operation to select an item

(see the following table). 3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

Default: XX

BT MODE

PHONE SELECT AUDIO SELECT

Selects the phone or audio device to connect or disconnect. ” ” appears in front of the device name when connected. ” ” appears in front of the current playback audio device.

DEVICE DELETE

1 Perform select an item ( device to delete. 2 Performselect an item ( or [NO].

3 or 4)’ operation to select a 3 or 4)’ operation to select [YES]

PIN CODE EDIT (0000)

Changes the PIN code (up to 6 digits).

1 Perform the following operation to select a number.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Turn the volume knob

KD-R891BT: Press

2 Press

to move the entry position.

Repeat steps 1 and 2 until you finish entering the PIN code.

3 Press the following to confirm.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

volume knob

KD-R891BT:

You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.

ENGLISH 17

BLUETOOTH®

RECONNECT AUTO PAIRING
INITIALIZE INFORMATION

ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ; OFF: Cancels.
ON: The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/Android device) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; OFF: Cancels.
YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; NO: Cancels.
MY BT NAME: Displays the unit name (“KD-R9 BT”/ “KD-R8 BT”/”KD-R7 BT”). ; MY ADDRESS: Shows address of this unit.

Bluetooth compatibility check mode

You can check the connectivity of the supported profile between the

Bluetooth device and the unit.

· Make sure there is no Bluetooth device paired.

1 Press and hold

“BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW USING

PHONE” “PIN IS 0000” scrolls on the display. 2 Search and select “KD-R9 BT”/”KD-R8 BT”/”KD-R7 BT” on the

Bluetooth device within 3 minutes. 3 Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey): Ensure that the same

passkey appears on the unit and Bluetooth device, then operate

the Bluetooth device to confirm the passkey.

(B) “PAIRING” “PIN IS 0000”: Enter “0000” on the Bluetooth device.

After pairing is successful, “PAIRING OK” “[Device Name]” appears and Bluetooth compatibility check starts. If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device to allow phonebook access to continue. “TESTING” flashes on the display.
The connectivity result flashes on the display. “PAIRING OK” and/or “HANDS- FREE OK”1 and/or “AUD.STREAM OK”2 and/or “PBAP OK”3 : Compatible
1 Compatible with Hands-Free Profile (HFP) 2 Compatible with Advanced Audio Distribution Profile (A2DP) 3 Compatible with Phonebook Access profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been deleted, and the unit exits check mode.
· To cancel, press and hold source button to turn off the power, then turn on the power again.

18 ENGLISH

BLUETOOTH®
BLUETOOTH — Audio For key layout on the faceplate, see page 3 or page 4. While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Audio player via Bluetooth
1 Press source button repeatedly to select BT AUDIO. · Pressing enters BT AUDIO directly.
2 Operate the Bluetooth audio player to start playback.

On the faceplate

Playback/pause

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Press the volume knob.

KD-R891BT: Press

Select group or folder

Press

Reverse skip/Forward skip Press

Reverse/Fast-forward

Press and hold

Repeat play

Press

repeatedly.

TRACK REPEAT, ALL REPEAT, REPEAT OFF

Random play

Press repeatedly. GROUP RANDOM, ALL RANDOM, RANDOM OFF

Select a file from a folder/ Refer to “Select a file from a folder/list” on page 10. list
Switch between connected Press 5.* Bluetooth audio devices

Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.
Operations and display indications may differ according to their availability on the connected device.

Settings to use JVC Remote application

JVC Remote application is designed to control the JVC car receiver’s operations from the following devices.

KD-R992BT/KD-R899BT/KD-R891BT: iPhone/iPod (via Bluetooth

or via USB input terminal)

or Android smartphone (via

Bluetooth)

KD-R794BT/KD-R792BT:

Android smartphone (via

Bluetooth)

Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit http:// www.jvc.net/cs/car/.

1 Press and hold

2 Perform `select an item ( 3 or 4)’ operation to

select an item. ( 20)

3 Repeat step 2 until the desired item is selected or

activated.

4 Press

to exit.

To return to the previous setting item, press

ENGLISH 19

BLUETOOTH®

Default: XX

REMOTE APP

SELECT IOS

Select the device (IOS or ANDROID) to use the application.
YES: Selects iPhone/iPod to use the application via Bluetooth or connected via USB input terminal. ; NO: Cancels. If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected via USB input terminal) to activate the application. · The connectivity of the application will be interrupted or disconnected if:
You change from iPod BT source to any playback source connected via the USB input terminal.
You change from iPod USB source to iPod BT source.

ANDROID YES: Selects Android smartphone to use the application via Bluetooth. ; NO: Cancels.

ANDROID LIST*

Selects the Android smartphone to use from the list.

STATUS

Shows the status of the selected device. IOS CONNECTED: You are able to use the application using the iPhone/iPod connected via Bluetooth or USB input terminal. IOS NOT CONNECTED: No IOS device is connected to use the application. ANDROID CONNECTED: You are able to use the application using the Android smartphone connected via Bluetooth. ANDROID NOT CONNECTED: No Android device is connected to use the application.

Displayed only when [ANDROID] of [SELECT] is set to [YES].

Listen to iPhone/iPod via Bluetooth (for KD-R992BT/KD-R899BT/ KD-R891BT)
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
Press source button repeatedly to select iPod BT. · You can operate the iPod/iPhone in the same way as iPod/iPhone via
USB input terminal. ( 8) · If you plug in an iPhone/iPod to the USB input terminal while listening
to iPod BT source, the source automatically change to iPod USB. Press source button to select iPod BT if the device is still connected via Bluetooth.
Internet radio via Bluetooth
You can listen to Spotify on the iPhone/iPod touch/Android device via Bluetooth on this unit. · Make sure the USB input terminal is not connected to any device.
Listen to Spotify
Preparation: Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 5) 1 Open the Spotify application on your device. 2 Connect your device via Bluetooth connection. ( 13) 3 Press source button repeatedly to select SPOTIFY (for iPhone/iPod)
or SPOTIFY BT (for Android device). The source switches and broadcast starts automatically. · You can operate Spotify in the same way as Spotify via USB input terminal. ( 11)

20 ENGLISH

AUDIO SETTINGS

For key layout on the faceplate, see page 3 or page 4.

1 Press and hold

2 Perform `select an item ( 3 or 4)’ operation to select an item

(see the following table). 3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

Default: XX

EQ SETTING

PRESET EQ

Select a preset equalizer suitable to the music genre. · Select [USER] to use the settings made in [EASY EQ] or [PRO EQ]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/ USER/CLASSICAL Drive equalizer (DRVN 3/DRVN 2/DRVN

boosts specific frequencies in the audio signal to reduce the noise heard from outside the car or running noise of the tyres

EASY EQ

Adjust your own sound settings.

· The settings are stored to [USER].

· The settings made may affect the current settings of [PRO EQ].

SUB.W SP12: 00 to +06

(Default: +03

SUB.W 13:

50 to +10

BASS:

LVL09 to LVL+09

LVL 00

MID:

LVL09 to LVL+09

LVL 00

TRE:

LVL09 to LVL+09

LVL 00)

PRO EQ

Adjust your own sound settings. · The settings are stored to [USER]. · The settings made may affect the current settings of [EASY EQ].

62.5HZ

LEVEL 09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

ON: Turns on the extended bass. ; OFF: Cancels.

100HZ/160HZ/250HZ/400HZ/630HZ/1KHZ/1.6KHZ/2.5KHZ/4KHZ/6.3KHZ/10KHZ/ 16kHZ

LEVEL 09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

Q FACTOR

1.35/1.50/2.00: Adjust the quality factor.

AUDIO CONTROL

BASS BOOST

LEVEL +01 to LEVEL +05: Selects your preferred bass boost level. ; OFF: Cancels.

LOUDNESS SUB.W LEVEL*1

LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a wellbalanced sound at low volume. ; OFF: Cancels.

SPK-OUT *2

(Not applicable when 3-way crossover is selected.) SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the output level of the subwoofer connected via speaker lead. ( 35)

PRE-OUT *3

SUB.W 50 to SUB.W +10 (SUB.W 00): Adjusts the output level of the subwoofer connected to the lineout terminals (SW or REAR/SW) through an external amplifier. ( 35)

SUBWOOFER SET *3

ON: Turns on the subwoofer output. ; OFF: Cancels.

FADER

(Not applicable when 3-way crossover is selected.) POSITION R15 to POSITION F15 (POSITION 00): Adjusts the front and rear speaker output balance.

1, 2, *3: ( 22)

ENGLISH 21

AUDIO SETTINGS

BALANCE *4

POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and right speaker output balance.

VOLUME ADJUST LEVEL 15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust.

AMP GAIN

LOW POWER: Limits the maximum volume level to 25. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) ; HIGH POWER: The maximum volume level is 35.

SPK/PRE OUT

(Not applicable when 3-way crossover is selected.) Depending on the speaker connection method, select the appropriate setting to get the desired output. ( Speaker output settings)

SPEAKER SIZE X ‘ OVER

Depending on the crossover type you have selected ( [X ‘ OVER TYPE]), 2-way crossover or 3-way crossover setting items will be shown. ( 23, Crossover settings) By default, 2-way crossover type is selected.

DTA SETTINGS CAR SETTINGS

For settings, 25, Digital Time Alignment settings.

X ‘ OVER TYPE Caution: Adjust the volume before changing the [X ‘ OVER TYPE] to avoid the sudden increase or decrease of the output level.

2-WAY

(Displayed only when [3-WAY] is selected.) YES: Selects two way crossover type. ; NO: Cancels.

3-WAY

(Displayed only when [2-WAY] is selected.) YES: Selects three way crossover type. ; NO: Cancels.

1 Displayed only when [SUBWOOFER SET] is set to [ON]. ( 21) 2 For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
( 23) 3 For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W]. ( 23) 4 This adjustment will not affect the subwoofer output.

SOUND EFFECT SPACE ENHANCE
SND RESPONSE SOUND LIFT VOL LINK EQ K2 TECHNOLOGY

(Not applicable for TUNER source.) SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ; OFF: Cancels.
LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ; OFF: Cancels.
LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels.
(Not applicable for TUNER source and AUX source.) ON: Improve the sound quality of compressed music. ; OFF: Cancels.

Speaker output settings [SPK/PRE OUT] (Applicable only if [X ` OVER TYPE] is set to [2-WAY]) Select the output setting for the speakers [SPK/PRE OUT], based on the speaker connection method.

Connection via lineout terminals For connections through an external amplifier. ( 35) KD-R992BT:

Setting on [SPK/PRE OUT]

Audio signal through lineout terminal

FRONT

REAR

REAR/REAR (default) Front speakers output Rear speakers output Subwoofer output

REAR/SUB.W

( Not available )

( Not available ) ( Not available )

SUB.W/SUB.W

Front speakers output L (left): Subwoofer output R (right): (Mute)

Subwoofer output

22 ENGLISH

AUDIO SETTINGS

KD-R899BT/KD-R891BT:

Setting on [SPK/PRE OUT]

Audio signal through lineout terminal

FRONT

REAR/SW

REAR/REAR

Front speakers output

Rear speakers output

REAR/SUB.W (default) Front speakers output

Subwoofer output

SUB.W/SUB.W

Front speakers output

Subwoofer output

KD-R794BT/KD-R792BT:
Setting on [SPK/PRE OUT] REAR/REAR REAR/SUB.W (default) SUB.W/SUB.W

Audio signal through lineout terminal REAR/SW
Rear speakers output Subwoofer output Subwoofer output

Connection via speaker leads
For connections without using an external amplifier. However, with this settings you can also enjoy the subwoofer output. ( 35)

Setting on [SPK/PRE OUT]

Audio signal through rear speaker lead

L (left)

R (right)

REAR/REAR

Rear speakers output

REAR/SUB.W

Rear speakers output

SUB.W/SUB.W

Subwoofer output

(Mute)

If [SUB.W/SUB.W] is selected: [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available.
( 24) [POSITION R02] is selected in [FADER] and selectable range is [POSITION
R15] to [POSITION 00]. ( 21)

Crossover settings
Below are the available setting items for 2-way crossover and 3-way crossover.
Caution Select a crossover type according to how the speakers are connected. ( 35) If you select a wrong type: · The speakers may damage. · The output sound level may be extremely high or low.
SPEAKER SIZE Selects according to the connected speaker size for optimum performance. · The frequency and slope settings are automatically set for the crossover
of the selected speaker. · When 2-way crossover is selected, if [NONE] is selected for [TWEETER] of
[FRONT], [REAR] and [SUBWOOFER] for [SPEAKER SIZE], the [X OVER] setting of the selected speaker is not available. · When 3-way crossover is selected, if [NONE] is selected for [WOOFER] of [SPEAKER SIZE], the [X OVER] setting of [WOOFER] is not available.
X ` OVER (crossover) · [FRQ]/[F-HPF FRQ]/[R-HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]/[LPF FRQ]: Adjusts the
crossover frequency for the selected speakers (high pass filter or low pass filter). If [THROUGH] is selected, all signals are sent to the selected speakers. · [SLOPE]/[F-HPF SLOPE]/[R-HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]/[LPF SLOPE]: Adjusts the crossover slope. Selectable only if a setting other than [THROUGH] is selected for the crossover frequency. · [SW LPF PHASE]/[PHASE]: Selects the phase of the speaker output to be in line with the other speaker output. · [GAIN LEFT]/[GAIN RIGHT]/[F-HPF GAIN]/[R-HPF GAIN]/[SW LPF GAIN]/[GAIN]: Adjusts the output volume of the selected speaker.

ENGLISH 23

AUDIO SETTINGS

2-way crossover setting items

3-way crossover setting items

SPEAKER SIZE

FRONT

SIZE

8CM/10CM/12CM/13CM/16CM/17CM/18CM/

4×6/5×7/6×8/6×9/7×10

TWEETER

SMALL/MIDDLE/LARGE/NONE (not connected)

REAR*1

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/ 6×9/7×10/NONE (not connected)

SUBWOOFER23 16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)

X ‘ OVER

TWEETER

FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/ 8KHZ/10KHZ/12.5KHZ

GAIN LEFT 08DB to 00DB

GAIN RIGHT 08DB to 00DB

FRONT HPF

F-HPF FRQ

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/ THROUGH

F-HPF SLOPE 06DB/12DB/18DB/24DB

F-HPF GAIN 08DB to 00DB

REAR HPF*1

R-HPF FRQ

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/ THROUGH

R-HPF SLOPE 06DB/12DB/18DB/24DB

R-HPF GAIN 08DB to 00DB

SUBWOOFER LPF23

SW LPF FRQ

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/ THROUGH

SW LPF SLOPE 06DB/12DB/18DB/24DB

SW LPF PHASE REVERSE (180°)/ NORMAL (0°)

SW LPF GAIN 08DB to 00DB

TWEETER

SMALL/MIDDLE/LARGE

MID RANGE WOOFER*3

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9 16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)

X ‘ OVER

TWEETER

HPF FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ 10KHZ/12.5KHZ

SLOPE

06DB/12DB

PHASE

REVERSE (180°)/NORMAL (0°)

GAIN

08DB to 00DB

MID RANGE HPF FRQ

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/ 120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

HPF SLOPE 06DB/12DB

LPF FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ 10KHZ/12.5KHZ/THROUGH

LPF SLOPE 06DB/12DB

PHASE

REVERSE (180°)/NORMAL (0°)

WOOFER*3

GAIN LPF FRQ

08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/ 120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

SLOPE

06DB/12DB

PHASE

REVERSE (180°)/NORMAL (0°)

GAIN

08DB to 00DB

1 Displayed only when [SPK/PRE OUT] is set to [REAR/REAR] or [REAR/SUB.W].
( 22, 23) 2 Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].
( 22, 23) *3 Displayed only when [SUBWOOFER SET] is set to [ON]. ( 21)

24 ENGLISH

AUDIO SETTINGS

Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. · For more information, Determining the value for [DISTANCE] and [GAIN] of
[DTA SETTINGS].

DTA SETTINGS POSITION
DISTANCE 1 GAIN1 DTA RESET CAR SETTINGS CAR TYPE
R-SP LOCATION*2

Selects your listening position (reference point). ALL: Not compensating ; FRONT RIGHT: Front right seat ; FRONT LEFT: Front left seat ; FRONT ALL: Front seat · [FRONT ALL] is displayed only when [X ‘ OVER TYPE] is set to
[2-WAY]. ( 22)
0CM to 610CM: Fine adjust the distance to compensate.
8DB to 0DB: Fine adjust the output volume of the selected speaker.
YES: Resets the settings ([DISTANCE] and [GAIN]) of the selected [POSITION] to default. ; NO: Cancels.
Identify your car type and rear speaker location in order to make the adjustment for [DTA SETTINGS].
COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV/ MINIVAN(LONG): Selects the type of vehicle. ; OFF: Not compensating.
Selects the location of the rear speakers in your vehicle to calculate the furthest distance from the listening position selected (reference point). · DOOR/REAR DECK: Selectable only when [CAR TYPE] is selected
as [OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV]. · 2ND ROW/3RD ROW: Selectable only when [CAR TYPE] is
selected as [MINIVAN] or [MINIVAN(LONG)].

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS] If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determine the center of the currently set
listening position as the reference point. 2 Measure the distances from the reference
point to the speakers. 3 Calculate the differences between the distance
of the furthest speaker (rear speaker) and other speakers. 4 Set the [DISTANCE] calculated in step 3 for individual speakers. 5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the listening position
1 Before making an adjustment, select the speaker: When 2-way crossover is selected: FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER: [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 24)
When 3-way crossover is selected: TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER: [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 24) 2 Displayed only when [X ‘ OVER TYPE] is set to [2-WAY] ( 22) and if a setting other
than [NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 24)

ENGLISH 25

DISPLAY SETTINGS
Zone identification for brightness setting KD-R992BT

KD-R899BT/ KD-R794BT/ KD-R792BT
KD-R891BT

(Symbolic button)

Zone identification for color setting KD-R992BT

KD-R891BT

Symbolic button

26 ENGLISH

1 Press and hold

2 Perform `select an item ( 3 or 4)’ operation to select an

item (see the following table). 3 Repeat step 2 until the desired item is selected/activated or

follow the instructions stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

Default: XX

DISPLAY

DIMMER

Dim the illumination. OFF: Dimmer is turned off. Brightness changes to [DAY] setting. ON: Dimmer is turned on. Brightness changes to [NIGHT] setting. ( [BRIGHTNESS]) DIMMER TIME: Set the dimmer on and off time. 1 Perform select an item ( 3 or 4)’ operation to adjust the [ON] time. 2 Performselect an item ( 3 or 4)’ operation to adjust the

DIMMER AUTO: Dimmer turns on and off automatically when you turn off or on the car headlights.*1

BRIGHTNESS

Set the brightness for day and night separately. 1 DAY/NIGHT: Select day or night. 2 Select a zone. (See the illustration.) 3 LEVEL 00 to LEVEL 31: Set the brightness level.

TEXT SCROLL*2 SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels.

1 The illumination control wire connection is required. ( 35) 2 Some characters or symbols will not be shown correctly (or will be blanked).

DISPLAY SETTINGS

COLOR (for KD-R992BT)

PRESET

Select illumination colors for the buttons on different zones separately. 1 Select a zone. (See the illustration on page 26.) 2 Select a color for the selected zone.
· COLOR 01 to COLOR 49
· USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
· COLOR FLOW01 to COLOR FLOW03: Color changes at different
speeds.
· CRYSTAL/FLOWER/FOREST/GRADATION/OCEAN/SUNSET/ RELAX: The selected color pattern is shown.*3 (Selectable only when [ALL ZONE] is selected in step 1.)

DAY COLOR NIGHT COLOR

Store your own day and night illumination colors for different zones. 1 Select a zone. (See the illustration on page 26.) 2 RED/GREEN/BLUE: Select a primary color. 3 00 to 31: Select the level. Repeat steps 2 and 3 for all the primary colors. · Your setting is stored to [USER] in [PRESET]. · [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your
car’s headlight.

COLOR GUIDE

ON: Changes the button illumination when settings are performed on menu and list search. ; OFF: Cancels.

*3 If one of these color pattern is selected, the [ZONE 1] and [ZONE 2] illumination colors will change to the default colors.

COLOR (for KD-R891BT: Symbolic button only)

PRESET

Select an illumination color for the symbolic button. (See the illustration on page 26.)
· COLOR 01 to COLOR 49 · USER: The color you have created for [DAY COLOR] or [NIGHT COLOR] is
shown. · COLOR FLOW01 to COLOR FLOW03: Color changes at different speeds. · Preset color: CRYSTAL, FLOWER, FOREST, GRADATION, OCEAN, SUNSET,
RELAX

DAY COLOR NIGHT COLOR

Store your own day and night illumination colors for the symbolic button.
1 RED/GREEN/BLUE: Select a primary color. 2 00 to 31: Select the level. Repeat steps 1 and 2 for all primary colors. · Your setting is stored to [USER] in [PRESET]. · [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car’s
headlight.

MENU COLOR ON: The color of symbolic button illumination changes to white color when in menu mode or when selecting a music file from a folder/list. ; OFF: Cancels.

ENGLISH 27

REFERENCES

Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to

damage the connector.

Handling discs: · Do not touch the recording surface of the disc.

Connector (on the reverse side of the faceplate)

· Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

· Do not use any accessories for the disc.

· Clean from the center of the disc and move outward.

· Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

· When removing discs from this unit, pull them out horizontally.

· Remove burrs from the center hole and disc edge before inserting a disc.

More information For: Latest firmware updates and latest compatible item list
JVC original application Any other latest information Visit http://www.jvc.net/cs/car/.

General · This unit can only play the following CDs:

· DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product cannot be recommended.
· For detailed information and notes about the playable audio files, visit http://www.jvc.net/cs/car/.

Playable files

· Playable audio file:

For disc:

KD-R992BT/KD-R899BT/KD-R891BT: MP3 (.mp3), WMA (.wma), AAC (.aac)

KD-R794BT/KD-R792BT:

MP3 (.mp3), WMA (.wma)

For USB mass storage class device:

KD-R992BT/KD-R899BT/KD-R891BT: MP3 (.mp3), WMA (.wma), AAC (.aac),

AAC (.m4a), WAV (.wav), FLAC (.flac)

KD-R794BT/KD-R792BT:

MP3 (.mp3), WMA (.wma), WAV (.wav),

FLAC (.flac)

· Playable disc media: CD-R/CD-RW/CD-ROM

· Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name

· Playable USB device file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible

depending on the types or conditions of media or device.

The AAC (.m4a) file in a CD encoded by iTunes cannot be played on this unit.

Unplayable discs · Discs that are not round. · Discs with coloring on the recording surface or discs that are dirty. · Recordable/ReWritable discs that have not been finalized. · 8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices · You cannot connect a USB device via a USB hub. · Connecting a cable whose total length is longer than 5 m may result in abnormal playback. · This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.

About iPod/iPhone (except for KD-R794BT/KD-R792BT) · Via USB input terminal:
Made for iPod touch (5th and 6th generation) iPod nano (7th generation) iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus

28 ENGLISH

REFERENCES

· Via Bluetooth: Made for iPod touch (5th and 6th generation) iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus
· It is not possible to browse video files on the “Videos” menu in [HEAD MODE]. · The song order displayed on the selection menu of this unit may differ from that of the iPod/
iPhone. · Depending on the version of the operating system of the iPod/iPhone, some functions may
not operate on this unit.

Available Cyrillic letters
Available characters Display indications

About Android device · This unit supports Android OS 4.1 and above. · Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory
(AOA) 2.0. · If the Android device supports both mass storage class device and AOA 2.0, this unit always
playback via AOA 2.0 as priority.
About Spotify · Spotify application supports:
iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus (iOS 8 or above) iPod touch (5th and 6th generation) Android OS 4.0.3 or above · Spotify is a third party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. · Some functions of Spotify cannot be operated from this unit. · For issues using the application, please contact Spotify at <www.spotify.com>.
About Bluetooth · Depending on the Bluetooth version of the device, some Bluetooth devices may not be able
to connect to this unit. · This unit may not work with some Bluetooth devices. · Signal conditions vary, depending on the surroundings.

Change the display information Each time you press , the display information changes. · If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other
information (eg. station name) appears or display will be blank.

Source name FM or AM
CD or USB

Display information (for KD-R992BT/KD-R891BT)
Frequency (Date/Clock)1 Frequency (Date) with music synchronisation2 (back to the beginning)
(For FM Radio Data System stations only) Station name (PS)/Program type (PTY) (Date/Clock)1 Radio text (Date/Clock)1 Radio text+ (Radio text+) Song title (Artist) Song title (Date/Clock)1 Frequency (Date/Clock)1 Station name (PS)/Program type (PTY) (Date) with music synchronisation2 (back to the beginning)
(For CD-DA) Track title (Artist) Track title (Disc name) Track title (Date/ Clock)1 Playing time (Date/Clock)1 Track title (Artist) with music synchronisation2 (back to the beginning)
(For MP3/WMA/AAC/WAV/FLAC files) Song title (Artist) Song title (Album name) Song title (Date/ Clock)1 File name (Folder name) File name (Date/Clock)1
Playing time (Date/Clock)1 Song title (Artist) with music synchronisation2 (back to the beginning)

1, 2: ( 30)

ENGLISH 29

REFERENCES

Source name

Display information (for KD-R992BT/KD-R891BT)

iPod USB/iPod BT or ANDROID

When [HEAD MODE]/[AUTO MODE] is selected ( 9):
Song title (Artist) Song title (Album name) Song title (Date/ Clock)1 Playing time (Date/Clock)1 Song title (Artist) with music synchronisation*2 (back to the beginning)

SPOTIFY/SPOTIFY BT

Context title (Date/Clock)1 Song title (Artist) Song title (Album name) Song title (Date/Clock)1 Playing Time (Date/ Clock)1 Context title (Date) with music synchronisation2
(back to the beginning)

BT AUDIO

Song title (Artist) Song title (Album name) Song title (Date/ Clock)1 Playing time (Date/Clock)1 Song title (Artist) with music synchronisation*2 (back to the beginning)

AUX

AUX (Date/Clock)1 AUX (Date) with music synchronisation2

(back to the beginning)

1 Battery and signal strength of the Bluetooth device will be shown if [BATT/SIGNAL] is set to [AUTO]. ( 16)
2 KD-R992BT: The illumination color of the buttons change and synchronise with the music. KD-R891BT: The illumination color of the symbolic button changes and synchronises with the music.

Source name

Display information (for KD-R899BT/KD-R794BT/KD-R792BT)

FM or AM

Frequency Clock Frequency with music synchronisation* (back to the beginning)

(For FM Radio Data System stations only) Station name (PS)/Program type (PTY) Radio text Radio text+ Radio text+ title/Radio text+ artist Frequency Clock Station name (PS)/Program type (PTY) with music synchronisation* (back to the beginning)

CD or USB

(For CD-DA) Disc title/Artist Track title/Artist Playing time Clock Disc title/Artist with music synchronisation* (back to the beginning))

(For MP3/WMA/AAC/WAV/FLAC files) Song title/Artist Album name/Artist Folder name
File name Playing time Clock Song title/Artist with music synchronisation* (back to the beginning)

iPod USB/iPod BT or ANDROID

When [HEAD MODE]/[AUTO MODE] is selected ( 9): Song title/Artist Album name/Artist Playing time Clock Song title/Artist with music synchronisation* (back to the beginning)

SPOTIFY/ SPOTIFY BT

Context title Song title Artist name Album name Playing Time Clock Context title with music synchronisation* (back to the beginning)

BT AUDIO

Song title/Artist Album name/Artist Playing time Clock Song title/Artist with music synchronisation* (back to the
beginning)

AUX

AUX Clock AUX with music synchronisation* (back to the

beginning)

The brightness of the button illumination changes and synchronises with the music.

30 ENGLISH

TROUBLESHOOTING

Symptom

Remedy

Sound cannot be heard.

· Adjust the volume to the optimum level. · Check the cords and connections.

General

“MISWIRING CHECK WIRING THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

“PROTECTING SEND SERVICE” appears.

Send the unit to the nearest service center.

Source cannot be selected. Check the [SOURCE SELECT] setting. ( 5)

Radio

· Radio reception is poor. · Static noise while
listening to the radio.

Connect the antenna firmly.

Disc cannot be ejected.

Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected.

“IN DISC” appears.

Make sure nothing is blocking the loading slot when you eject the disc.

“PLEASE EJECT” appears.

Press , then insert the disc correctly.

CD/USB/iPod

Playback order is not as intended.

The playback order is determined by the file name (USB) or the order in which files were recorded (disc).

Elapsed playing time is not This depends on the recording process earlier. correct.

“NOT SUPPORT” appears and track skips.

Check whether the track is a playable format. ( 28)

“READING” keeps flashing. · Do not use too many hierarchical levels and folders. · Reload the disc or reattach the USB device.

Symptom

Remedy

“UNSUPPORTED DEVICE” appears.

· Check whether the connected device is compatible with this unit and ensure the file systems are in supported formats. ( 28)
· Reattach the device.

“UNRESPONSIVE DEVICE” appears.

Make sure the device is not malfunction and reattach the device.

“USB HUB IS NOT SUPPORTED” appears.

This unit cannot support a USB device connected via a USB hub.

“CANNOT PLAY” appears. Connect a USB device that contains playable audio files.

CD/USB/iPod

· The source does not change to “USB” when you connect a USB device while listening to another source.
· “USB ERROR” appears

The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device.

The iPod/iPhone does not · Check the connection between this unit and iPod/ turn on or does not work. iPhone.
· Disconnect and reset the iPod/iPhone using hard reset.

“LOADING” appears when

you enter search mode by

pressing

This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.

Correct characters are not displayed.

· This unit can only display uppercase letters, numbers, and a limited number of symbols.
· Depending on the display language you have selected ( 6), some characters may not be displayed correctly.

ENGLISH 31

TROUBLESHOOTING

Symptom

Remedy

· Sound cannot be heard during playback.
· Sound output only from the Android device.

· Reconnect the Android device. · If in [AUDIO MODE], launch any media player
application on the Android device and start playback. · If in [AUDIO MODE], relaunch the current media player
application or use another media player application. · Restart the Android device. · If this does not solve the problem, the connected
Android device is unable to route the audio signal to unit. ( 29)

ANDROID

Cannot playback at [AUTO MODE].

· Make sure JVC MUSIC PLAY APP is installed on the Android device. ( 8)
· Reconnect the Android device and select the appropriate control mode. ( 9)
· If this does not solve the problem, the connected Android device does not support [AUTO MODE]. ( 29)

“NO DEVICE” or “READING” keeps flashing.

· Switch off the developer options on the Android device. · Reconnect the Android device. · If this does not solve the problem, the connected
Android device does not support [AUTO MODE]. ( 29)

Playback is intermittent or Turn off the power saving mode on the Android device. sound skips.

“CANNOT PLAY”

· Make sure Android device contains playable audio files. · Reconnect the Android device. · Restart the Android device.

Symptom

Remedy

“DISCONNECTED”

USB is disconnected from the head unit. Please make sure the device is connected properly through USB.

Spotify

“CONNECTING”

· Connected via USB input terminal: The device is connecting to the head unit. Please wait.
· Connected via Bluetooth: The Bluetooth is disconnected. Please check Bluetooth connection and make sure both the device and unit are paired and connected.

“CHECK APP”

The Spotify application is not connected properly, or user is not login. End the Spotify application and restart, then log in to your Spotify account.

No Bluetooth device is detected.

· Search from the Bluetooth device again. · Reset the unit. ( 3 or 4)

Pairing cannot be made.

· Make sure you have entered the same PIN code to both the unit and Bluetooth device.
· Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. ( 13)

Bluetooth®

Echo or noise occurs.

· Adjust the microphone unit’s position. ( 12) · Check the [ECHO CANCEL] setting. ( 15)

Phone sound quality is poor.

· Reduce the distance between the unit and the Bluetooth device.
· Move the car to a place where you can get a better signal reception.

Sound is being interrupted · Reduce the distance between the unit and the Bluetooth

or skipped during playback audio player.

of a Bluetooth audio

· Turn off, then turn on the unit and try to connect again.

player.

· Other Bluetooth devices might be trying to connect to

the unit.

32 ENGLISH

TROUBLESHOOTING

INSTALLATION/CONNECTION

Bluetooth®

Symptom The connected Bluetooth audio player cannot be controlled. “PLEASE WAIT”
“NOT SUPPORT” “ERROR” “H/W ERROR”
“SWITCHING NG”

Remedy
· Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)
· Disconnect and connect the Bluetooth player again.
The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again.
The connected phone does not support Voice Recognition feature.
Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
Reset the unit and try the operation again. If “H/W ERROR” appears again, consult your nearest service center.
The connected phones might not support phone switching feature.

If you still have troubles, reset the unit. ( 3 or 4)

Warning · The unit can only be used with a 12 V DC power supply, negative ground. · Disconnect the battery’s negative terminal before wiring and mounting. · Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire
(black) to prevent a short circuit. · To prevent short circuit:
Insulate unconnected wires with vinyl tape. Be sure to ground this unit to the car’s chassis again after installation. Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into
contact with metal parts to protect the wires.
Caution · For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. · Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and
shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. · Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect
them in parallel. · Connect speakers with a maximum power of more than 50 W. If the maximum power of the
speakers is lower than 50 W, change the [AMP GAIN] setting to avoid damaging the speakers. ( 22) · Mount the unit at an angle of less than 30º. · If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. · Keep all cables away from heat dissipate metal parts. · After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. · If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse
with one that has the same rating.

Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car
battery. 2 Connect the wires properly.
See Wiring connection. ( 35) 3 Install the unit to your car.
See Installing the unit (in-dash mounting). ( 34) 4 Connect the terminal of the car battery. 5 Press source button to turn on the power.
6 Detach the faceplate and reset the unit within 5 seconds. ( 3 or 4) ENGLISH 33

INSTALLATION/CONNECTION

Part list for installation

(A) Faceplate

(B) Trim plate

(D) Wiring harness

(E) Extraction key

Output terminals For 2-way crossover setting

3 pairs
2 pairs 1 pair

REAR FRONT SW
FRONT REAR/SW
REAR/SW

: Rear output : Front output : Subwoofer output
: Front output : Rear/subwoofer output
: Rear/subwoofer output

For 3-way crossover setting

3 pairs
2 pairs 1 pair

REAR FRONT SW
FRONT REAR/SW
REAR/SW

: Tweeter output : Mid Range output : Woofer output
: Mid Range output : Woofer output
: Woofer output

34 ENGLISH

Installing the unit (in-dash mounting)

Do the required wiring. ( 35)

Hook on the top side
Orientate the trim plate as illustrated before fitting.

Dashboard of your car

Bend the appropriate tabs to hold the sleeve firmly in place.

When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws
(commercially available).

How to remove the unit

Use only the specified screws. Using wrong screws might damage the unit.

INSTALLATION/CONNECTION
Wiring connection
Output terminals ( 34)

KD-R992BT KD-R899BT/KD-R891BT KD-R794BT/KD-R792BT

Antenna terminal

Microphone input jack ( 12) Fuse (10 A)

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below.

A7 (Red)

Ignition wire (Red)

Vehicle

Unit

A4 (Yellow) Default wiring

Battery wire (Yellow)

If your car does not have an ISO terminal We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.

Yellow (Battery wire) Red (Ignition wire)

Light blue/yellow (Steering remote control wire)

Red (A7) Yellow (A4)

ISO connectors

To the steering wheel remote control adapter

Pin A4 Yellow A5 Blue/White A6 Orange/white A7 Red A8 Black B1 Purple ] B2 Purple/black [ B3 Gray ] B4 Gray/black [ B5 White ] B6 White/black [ B7 Green ] B8 Green/black [

Color and function : Battery : Power control (12 V 350 mA) : Car light control switch : Ignition (ACC) : Earth (ground) connection
: Rear speaker (right) For 3-way crossover: Tweeter (right)
: Front speaker (right) For 3-way crossover: Mid range speaker (right)
: Front speaker (left) For 3-way crossover: Mid range speaker (left)
: Rear speaker (left)* For 3-way crossover: Tweeter (left)

You can also connect a subwoofer speaker directly without an external subwoofer amplifier. For setting, 23.

ENGLISH 35

SPECIFICATIONS

Tuner

FM Frequency Range
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity (DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
AM Frequency Range (MW) Usable Sensitivity (S/N = 20 dB)
AM Frequency Range (LW) Usable Sensitivity (S/N = 20 dB)

87.5 MHz — 108.0 MHz (50 kHz step) 0.71 V/75 (8.2 dBf) 2.0 V/75
30 Hz — 15 kHz 64 dB 40 dB 531 kHz — 1 611 kHz (9 kHz step) 28.2 V (29 dB) 153 kHz — 279 kHz (9 kHz step) 50 V (33.9 dB)

Laser Diode Digital Filter (D/A) Spindle Speed Wow & Flutter Frequency Response (±1 dB) Total Harmonic Distortion (1 kHz) Signal-to-Noise Ratio (1 kHz) Dynamic Range Channel Separation MP3 Decode WMA Decode AAC Decode

GaAIAs 8 times over sampling 500 rpm — 200 rpm (CLV) Below measurable limit 20 Hz — 20 kHz 0.01 % 105 dB 90 dB 85 dB Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio AAC-LC “.aac” files (Except KD-R794BT/KD- R792BT)

CD player

Bluetooth

USB

USB Standard Compatible Devices File System Maximum Supply Current Digital Filter (D/A) Converter Frequency Response (±1 dB) Signal-to-Noise Ratio (1 kHz) Dynamic Range Channel Separation MP3 Decode WMA Decode AAC Decode
WAV Decode FLAC Decode
Version Frequency Range Output Power Maximum Communication Range Pairing Profile

36 ENGLISH

Subject to change without notice
USB 1.1, USB 2.0 (Full speed) Mass storage class FAT12/16/32 DC 5 V 1.5 A 24 Bit 20 Hz — 20 kHz 105 dB 90 dB 85 dB Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio AAC-LC “.aac”, “.m4a” files (Except KD- R794BT/KD-R792BT) Linear-PCM FLAC file, up to 24 bit/96 kHz
Bluetooth 3.0 2.402 GHz — 2.480 GHz +4 dBm (MAX), 0 dBm (AVE) Power Class 2 Line of sight approx. 10 m (32.8 ft) SSP (Secure Simple Pairing) HFP1.6 (Hands-Free Profile) A2DP (Advanced Audio Distribution Profile) AVRCP1.5 (Audio/Video Remote Control Profile) PBAP (Phonebook Access Profile) SPP (Serial Port Profile)

General

Audio

Auxiliary

SPECIFICATIONS
Frequency Response (±3 dB) Input Maximum Voltage Input Impedance Maximum Output Power
Full Bandwidth Power (at less than 1 % THD) Speaker Impedance Preout Level/Load
Preout Impedance Operating Voltage (10.5 V — 16 V allowable) Maximum Current Consumption Operating Temperature Range Installation Size (W × H × D) Net Weight (includes Trimplate, Mounting Sleeve)

20 Hz — 20 kHz 1 000 mV 30 k
50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 ) 22 W × 4
4 — 8 KD-R992BT: 4 000 mV/10 k load KD-R899BT/KD-R891BT/ KD-R794BT/KD-R792BT: CD/USB: 2 500 mV/10 k load 600
14.4 V
10 A 10°C — +60°C 182 mm × 53 mm × 158 mm 1.2 kg

ENGLISH 37

CONTENIDO

ANTES DEL USO

PUNTOS BÁSICOS

PROCEDIMIENTOS INICIALES 5
1 Cancele la demostración 2 Ajuste del reloj y la fecha 3 Realice los ajustes básicos

RADIO

AUX

CD/USB/iPod/ANDROID

Spotify

BLUETOOTH®

AJUSTES DE AUDIO

AJUSTES DE VISUALIZACIÓN 26

REFERENCIAS

Mantenimiento Más información

LOCALIZACIÓN Y SOLUCIÓN

DE PROBLEMAS

INSTALACIÓN/CONEXIÓN 33

ESPECIFICACIONES

ANTES DEL USO
IMPORTANTE · Antes de utilizar este producto y para asegurar su uso correcto, lea completamente este manual. En especial, lea y observe las
Advertencias y Precauciones incluidas en este manual. · Guarde el manual en un lugar seguro y accesible para futuras consultas.
Advertencia · No utilice ninguna función que pueda desviar su atención mientras está conduciendo el vehículo.
Precaución Ajuste del volumen: · Ajuste el volumen a un nivel que le permita oír los ruidos del exterior para impedir accidentes. · Antes de reproducir fuentes digitales, baje el volumen para evitar que el repentino aumento del nivel de salida cause daños a
los altavoces. General: · Evite el uso de dispositivos externos cuando puedan afectar la seguridad de conducción. · Asegúrese de tener una copia de respaldo de todos los datos importantes. No aceptamos responsabilidad alguna por la pérdida
de los datos grabados. · Para evitar cortocircuitos, nunca coloque ni deje objetos metálicos (por ejemplo, monedas o herramientas metálicas) dentro de
la unidad. · Si ocurre un error de disco debido a la condensación en el lente láser, extraiga el disco y espere hasta que se evapore la
humedad.

2 ESPAÑOL

Cómo leer este manual · Las operaciones se explican utilizando principalmente los botones de la placa frontal del KD-R992BT y KD-R891BT. · Se utilizan indicaciones en inglés para las explicaciones. Puede seleccionar el idioma de visualización desde el menú. ( 6) · [XX] indica los elementos seleccionados. · ( XX) significa que hay información disponible en la página indicada.

PUNTOS BÁSICOS

Placa frontal para KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT

Fijar

Ventanilla de visualización

Botón fuente

Ranura de carga

KD-R899BT/KD-R794BT/KD-R792BT

Desmontar

Botón de liberación

Rueda de volumen

Cómo reinicializar
Reinicialice la unidad en menos de 5 segundos después de haber extraído el placa frontal.

Para Encender la unidad Ajustar el volumen
Seleccionar una fuente Cambiar la información en pantalla Seleccionar un elemento

En la placa frontal

Pulse

· Pulse y mantenga pulsado para apagar la unidad.

Gire la rueda de volumen.

Pulse la rueda de volumen para enmudecer el sonido o pausar la reproducción. · Pulse otra vez para cancelar. El nivel de volumen vuelve al nivel anterior antes del silenciamiento o la pausa.

· Pulse · Pulse

repetidamente. y, a continuación, gire la rueda de volumen antes de que transcurran 2 segundos.

Pulse

repetidamente. ( 29, 30)

1 Gire la rueda de volumen para seleccionar un elemento. 2 Pulse la rueda para confirmar.

ESPAÑOL 3

PUNTOS BÁSICOS
Placa frontal para KD-R891BT
Botón fuente

Ranura de carga

Ventanilla de visualización

Fijar Desmontar

Botón de liberación

Cómo reinicializar
Reinicialice la unidad en menos de 5 segundos después de haber extraído el placa frontal.

Para Encender la unidad Ajustar el volumen
Seleccionar una fuente Cambiar la información en pantalla Seleccionar un elemento

En la placa frontal

Pulse

· Pulse y mantenga pulsado para apagar la unidad.

Pulse

· Pulse y mantenga pulsado

para aumentar continuamente el volumen a 15.

Pulse

para enmudecer el sonido o pausar la reproducción.

· Pulse otra vez para cancelar. El nivel de volumen vuelve al nivel anterior antes del silenciamiento o la pausa.

· Pulse · Pulse

repetidamente. y, a continuación, pulse

en el lapso de 2 segundos.

Pulse

repetidamente. ( 29, 30)

1 Pulse 2 Pulse

para seleccionar un elemento. para confirmar.

4 ESPAÑOL

PROCEDIMIENTOS INICIALES

Con respecto a la disposición de las teclas en la placa frontal, consulte la página 3 o la página 4.

1 Cancele la demostración
Cuando enciende la unidad por primera vez (o [FACTORY RESET] está ajustado a [YES]), en la pantalla se muestra: KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Pulse la rueda de volumen.
Se selecciona [YES] para la configuración inicial. 2 Pulse de nuevo la rueda de volumen.
Aparece “DEMO OFF”.

KD-R891BT:

“CANCEL DEMO” “PRESS ENTER”

1 Pulse

Se selecciona [YES] para la configuración inicial.

2 Pulse

otra vez.

Aparece “DEMO OFF”.

2 Ajuste del reloj y la fecha

1 Pulse y mantenga pulsado

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar

[CLOCK].

3 Realice la operación `seleccionar un elemento ( 3 o 4)’ para poner en hora

el reloj.

[CLOCK ADJUST] ajustar la hora y los minutos [CLOCK FORMAT] [12H] o [24H]

4 Realice la operación `seleccionar un elemento ( 3 o 4)’ para ajustar la

fecha.

[DATE SET] ajustar el día, mes y año

5 Pulse

para salir.

Para volver al elemento de ajuste anterior, pulse

3 Realice los ajustes básicos

1 Pulse y mantenga pulsado

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para realizar el

ajuste (consulte la siguiente tabla).

3 Repita el paso 2 hasta que se seleccione o active el elemento deseado.

4 Pulse

para salir.

Para volver al elemento de ajuste anterior, pulse

Predeterminado: XX

SYSTEM

KEY BEEP

(No aplicable si se ha seleccionado crossover de 3 vías.) ON: Activa el tono de pulsación de teclas. ; OFF: Se desactiva

SOURCE SELECT

AM SRC*

ON: Habilita AM en la selección de la fuente. ; OFF: Se deshabilita. ( 6)

SPOTIFY SRC* ON: Habilita SPOTIFY en la selección de la fuente. ; OFF: Se deshabilita. ( 11)

BUILT-IN AUX* ON: Habilita AUX en la selección de la fuente. ; OFF: Se deshabilita. ( 8)

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx YES: Se empieza a actualizar el firmware. ; NO: Se cancela (la actualización no se activa). Para obtener información sobre cómo actualizar el firmware, consulte:
http://www.jvc.net/cs/car/.

FACTORY RESET YES: Se restablecen los ajustes predeterminados (excepto la emisora memorizada). ; NO: Se cancela.

No se visualiza cuando se ha seleccionado la fuente correspondiente.

ESPAÑOL 5

PROCEDIMIENTOS INICIALES

CLOCK TIME SYNC
CLOCK DISPLAY
ENGLISH ESPANOL

ON: La hora del reloj se ajusta automáticamente con los datos de la hora del reloj (CT) de la señal FM Radio Data System. ; OFF: Se cancela. ON: La hora del reloj siempre se visualiza en la pantalla cuando la unidad está apagada. ; OFF: Se cancela.
Seleccione el idioma de visualización para el menú y la información de la música, si corresponde. Por defecto, se selecciona ENGLISH.

RADIO
Con respecto a la disposición de las teclas en la placa frontal, consulte la página 3 o la página 4.

Búsqueda de una emisora

1 Pulse repetidas veces el botón fuente para seleccionar FM o AM.

2 Pulse

para la búsqueda automática de emisoras.

(o)

Pulse y mantenga pulsado

hasta que parpadee “M” y, a continuación,

pulse repetidamente para realizar la búsqueda manual de emisoras.

· “ST” o “STEREO” se enciende cuando se recibe una radiodifusión FM estéreo con una intensidad de señal suficiente.

Ajustes en la memoria Puede almacenar hasta 18 emisoras de FM y 6 emisoras de AM en la memoria.

Almacene una emisora
Mientras escucha una emisora…. Pulse y mantenga pulsado uno de los botones numéricos (1 a 6).
(o) 1 Pulse y mantenga pulsado el siguiente botón hasta que “PRESET MODE” parpadee.
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: Rueda de volumen KD-R891BT: 2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar un número de preajuste. El número de preajuste parpadea y aparece “MEMORY”.

Seleccione una emisora almacenada

Pulse uno de los botones numéricos (1 a 6).

(o)

1 Pulse

2 Realice la operación `seleccionar un elemento (

de preajuste.

3 o 4)’ para seleccionar un número

6 ESPAÑOL

RADIO

Otros ajustes

1 Pulse y mantenga pulsado

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para realizar el

ajuste (consulte la siguiente tabla).

3 Repita el paso 2 hasta que se seleccione o active el elemento que desee

o siga las instrucciones indicadas en el elemento seleccionado.

4 Pulse

para salir.

Para volver al elemento de ajuste anterior, pulse

Predeterminado: XX

TUNER SETTING

RADIO TIMER

Enciende la radio a una hora específica, independientemente de la fuente actual. 1 ONCE/DAILY/WEEKLY/OFF: Selecciona la frecuencia de activación del temporizador. 2 FM/AM: Selecciona la banda. 3 01 a 18 (para FM)/01 a 06 (para AM): Seleccione la emisora preajustada. 4 Define el día*1 la hora de activación. Se ilumina””al finalizar.
El temporizador de la radio no se activará en los siguientes casos. · La unidad está apagada. · Se ha seleccionado [OFF] para [AM SRC] en [SOURCE SELECT] después de haber
seleccionado AM para el temporizador de la radio. ( 5)

SSM

SSM 0106/SSM 0712/SSM 1318: Configura automáticamente hasta

18 emisoras para FM. “SSM” deja de destellar cuando se almacenan las primeras 6 emisoras.

Seleccione SSM 0712/SSM 1318 para almacenar las 12 emisoras siguientes.

LOCAL SEEK

ON: Busca solo emisoras FM con buena recepción de señal. ; OFF: Se cancela. · Los ajustes realizados se aplican solo a la fuente/emisora seleccionada. Una vez que se
cambie la fuente/emisora, es necesario volver a realizar los ajustes.

IF BAND

AUTO: Aumenta la selectividad del sintonizador para reducir las interferencias con emisoras FM adyacentes. (Se puede perder el efecto estéreo.) ; WIDE: Sujeto a interferencias de las emisoras FM adyacentes, pero la calidad del sonido no se degrada y se conserva el efecto
estereofónico.

MONO SET ON: Mejora la recepción de FM pero se puede perder el efecto estéreo. ; OFF: Se cancela.

NEWS SET*2 ON: Si estuviera disponible, la unidad cambiará temporalmente al Noticiero. ; OFF: Se cancela.

REGIONAL*2 ON: Cambia a otra emisora sólo en la región específica que utiliza el control”AF”. ; OFF: Se cancela.

AF SET*2

ON: Cuando la recepción actual es deficiente, busca automáticamente otra emisora que transmita el mismo programa en la misma red Radio Data System con mejor recepción de señal. ; OFF: Se cancela.

ON: Permite que la unidad cambie temporalmente a Información sobre el tráfico si está

disponible (“TI”se enciende) mientras escucha todas las fuentes, excepto AM. ; OFF: Se cancela.

PTY SEARCH*2 Seleccione un código PTY (véase más abajo). Si hay una emisora que esta difundiendo un programa que tenga el mismo código PTY que el seleccionado por usted, se sintonizará esa emisora.

1 Puede seleccionarse solo si se selecciona [ONCE] o [WEEKLY] en el paso 1. 2 Solo para la fuente de FM.

Código PTY NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (música), ROCK M (música), EASY M (música), LIGHT M (música), CLASSICS, OTHER M (música), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (música), OLDIES, FOLK M (música), DOCUMENT

ESPAÑOL 7

AUX

CD/USB/iPod/ANDROID

Uso de un reproductor de audio portátil 1 Conecte un reproductor de audio portátil (disponible en el mercado).
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: Miniclavija estéreo de 3,5 mm con conector en “L” (disponible en el mercado)
Reproductor de audio portátil

Inicie la reproducción

La fuente cambia automáticamente y se inicia la reproducción.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: KD-R891BT:

Expulsa el disco

Lado de la etiqueta

Expulsa el disco

Lado de la etiqueta

Toma de entrada auxiliar
KD-R891BT: Toma de entrada auxiliar

Reproductor de audio portátil

Terminal de entrada USB
KD-R992BT/ KD-R899BT/ KD-R794BT/ KD-R792BT

Miniclavija estéreo de 3,5 mm con conector en “L” (disponible en el mercado) 2 Seleccione [ON] para [BUILT-IN AUX] en [SOURCE SELECT]. ( 5) 3 Pulse repetidas veces el botón fuente para seleccionar AUX. 4 Encienda el reproductor de audio portátil e inicie la reproducción.
Para una salida de audio óptima, utilice una miniclavija estéreo auricular de 3 contactos.

Terminal de entrada USB KD-R891BT

USB Cable USB 2.01 (disponible en el mercado) iPod/iPhone Accesorio del iPod/iPhone1 ANDROID2
Cable USB1 (disponible en el mercado)

8 ESPAÑOL

1 No deje el cable dentro del vehículo cuando no lo esté utilizando. 2 Cuando conecte un dispositivo Android, se mostrará”Press [VIEW] to install JVC MUSIC PLAY APP”. Siga
las instrucciones para instalar la aplicación. Antes de la conexión, también puede instalar la versión más reciente de la aplicación JVC MUSIC PLAY en su dispositivo Android. Para obtener más información, visite http://www.jvc.net/cs/car/.

CD/USB/iPod/ANDROID

Con respecto a la disposición de las teclas en la placa frontal, consulte la página 3 o la página 4.

· Fuentes seleccionables:

KD-R992BT/KD-R899BT/KD-R891BT: CD/USB/iPod USB/ANDROID

KD-R794BT/KD-R792BT:

CD/USB/ANDROID

Para Retroceder/ avanzar rápidamente3 Seleccionar una pista/archivo Seleccionar una carpeta4 Repetir reproducción5
Reproducción aleatoria5

En la placa frontal

Pulse y mantenga pulsado

Pulse

repetidamente.

TRACK REPEAT/ALL REPEAT

: CD de audio

TRACK REPEAT/FOLDER REPEAT/ALL REPEAT : Archivo MP3/WMA/AAC/

WAV/FLAC

ONE REPEAT/ALL REPEAT/REPEAT OFF

: iPod o ANDROID

Pulse

repetidamente.

ALL RANDOM/RANDOM OFF

: CD de audio

FOLDER RANDOM/ALL RANDOM/RANDOM OFF : Archivo MP3/WMA/AAC/

WAV/FLAC

SONG RANDOM/ALL RANDOM/RANDOM OFF : iPod o ANDROID

3 Para ANDROID: Aplicable sólo cuando se selecciona [AUTO MODE]. 4 Para CD: Sólo para archivos MP3/WMA/AAC. Esto no funciona para iPod/ANDROID. *5 Para iPod/ ANDROID: Aplicable sólo cuando se selecciona [HEAD MODE]/[AUTO MODE].

Seleccionar modo de control

Pulse iPod USB.

repetidamente mientras está en una fuente

HEAD MODE: Controla el iPod desde esta unidad. IPHONE MODE: Controla el iPod desde el propio iPod. No obstante, podrá
seguir controlando la reproducción/pausa o el salto de archivos desde esta unidad.

Pulse ANDROID. AUTO MODE:
AUDIO MODE:

repetidamente mientras está en una fuente
Controla el dispositivo Android desde esta unidad a través de la aplicación JVC MUSIC PLAY instalada en el dispositivo Android. Controla el dispositivo Android desde el propio Android a través de otras aplicaciones del reproductor de medios instalado en el dispositivo Android. No obstante, podrá seguir controlando la reproducción/pausa o el salto de archivos desde esta unidad.

Seleccionar Music drive

Pulse

repetidamente mientras está en una fuente USB.

Se reproducirán las canciones almacenadas en la siguiente unidad. · Memoria interna o externa seleccionada de un smartphone (Clase de
almacenamiento masivo). · Unidad seleccionada de un dispositivo de múltiples unidades.

ESPAÑOL 9

CD/USB/iPod/ANDROID

Ajustes para utilizar la JVC Remote aplicación (para KD-R992BT/KD-R899BT/KD- R891BT)
La aplicación JVC Remote ha sido diseñada para controlar las operaciones del receptor para automóvil JVC desde un iPhone/iPod (a través del terminal de entrada USB).
Preparativos: Antes de la conexión, instale la versión más reciente de la aplicación JVC Remote en su dispositivo. Para obtener más información, visite http://www.jvc.net/cs/car/.
Puede realizar los ajustes de la misma manera que a través de la conexión Bluetooth. ( 19)

Seleccionar un archivo de una carpeta/lista

Para iPod/ANDROID, aplicable solo cuando se selecciona [HEAD MODE]/[AUTO MODE].

1 Pulse

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar

una carpeta/lista. 3 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar

un archivo.

Búsqueda rápida (aplicable solo para fuentes CD, USB y ANDROID) Si existen numerosos archivos, puede realizar una búsqueda rápida.

Realice la siguiente operación para navegar por la lista con rapidez.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: Gire rápidamente la rueda de volumen

KD-R891BT:

Pulse y mantenga pulsado

Búsqueda alfabética (aplicable solo para fuentes iPod USB y ANDROID) Puede realizar la búsqueda de un archivo por el primer carácter.

Para fuente iPod USB Realice la siguiente operación para seleccionar el carácter que desee (A a Z, 0 a 9, y OTHERS).

KD-R992BT/KD-R899BT: Pulse

volumen

KD-R891BT:

Pulse

o gire rápidamente la rueda de

· Seleccione “OTHERS” si el primer carácter no es una letra (A a Z) ni un número (0 a 9).

Para fuente ANDROID

1 Pulse

para ingresar a la búsqueda de caracteres.

2 Realice la siguiente operación para seleccionar el carácter que

desee.

KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: KD-R891BT:

Gire la rueda de volumen Pulse

^A^

: Mayúscula (A a Z)

: Minúscula (a a z)

-0-

: Números (0 a 9)

-OTHERS- : Carácter distinto de A a Z y 0 a 9

3 Pulse lo siguiente para iniciar la búsqueda.

KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: KD-R891BT:

Rueda de volumen

· Para volver al elemento de ajuste anterior, pulse

· Para cancelar, pulse y mantenga pulsado

10 ESPAÑOL

Spotify
Preparativos: Instale la última versión de la aplicación Spotify en su dispositivo (iPhone/iPod touch) y, a continuación, cree una cuenta e inicie sesión en Spotify. · Seleccione [ON] para [SPOTIFY SRC] en [SOURCE SELECT]. ( 5)
KD-R794BT/KD-R792BT: Solo puede escuchar Spotify en un dispositivo Android a través de la conexión Bluetooth. ( 20)
Comience a escuchar 1 Abra la aplicación Spotify en su dispositivo. 2 Conecte su dispositivo al terminal de entrada USB.
KD-R992BT/KD-R899BT: Terminal de entrada USB Accesorio del iPod/iPhone*

KD-R891BT: Terminal de entrada USB

Accesorio del iPod/iPhone*

3 Pulse repetidas veces el botón fuente para seleccionar SPOTIFY. El programa de difusión se inicia automáticamente.

No deje el cable dentro del vehículo cuando no lo esté utilizando.

Para Reproducción/pausa
Saltar una pista Pulgar arriba o pulgar abajo 2 Iniciar la radio Repetir reproducción3
Reproducción aleatoria*3

En la placa frontal

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Pulse la rueda de volumen.

KD-R891BT: Pulse

Pulse S*1 / T.

Pulse

Pulse y mantenga pulsado 5.

Pulse

repetidamente.

ALL REPEAT, ONE REPEAT*1, REPEAT OFF

Pulse

repetidamente.*1

ALL RANDOM, RANDOM OFF

1 Disponible solamente para usuarios de cuenta premium. 2 Esta función está disponible solamente para las pistas de Radio. Si selecciona pulgar abajo, se omitirá la pista
actual. *3 Disponible solamente para las pistas en listas de reproducción.

Guardar información sobre canciones favoritas
Mientras escucha la Radio en Spotify…
Pulse y mantenga pulsado el siguiente botón para guardar la información de la canción. KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: rueda de volumen KD-R891BT:
Aparece “SAVED” y la información se guarda en “Your Music (Tu Música)” o “Your Library (Tu Biblioteca)” de su cuenta de Spotify.
Para no guardar, repita el mismo procedimiento. Aparece “REMOVED” y la información se elimina de “Your Music (Tu Música)” o “Your Library (Tu Biblioteca)” de su cuenta de Spotify.

ESPAÑOL 11

Spotify

Buscar una canción o una emisora

1 Pulse

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar

un tipo de lista.

Los tipos de listas visualizados difieren dependiendo de la información enviada por

Spotify.

3 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar

la canción o la emisora deseada.

Realice la siguiente operación para navegar por la lista con rapidez.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT:

Gire rápidamente la rueda de volumen

KD-R891BT:

Pulse y mantenga pulsado

Para cancelar, pulse y mantenga pulsado

BLUETOOTH®
BLUETOOTH — Conexión
Perfiles Bluetooth compatibles Perfil manos libres (HFP) Perfil Avanzado de Distribución de Audio (A2DP) Perfil de mando a distancia de Audio/Video (AVRCP) Perfil del puerto en serie (SPP) Perfil de acceso a la guía telefónica (PBAP) Códecs Bluetooth compatibles Códec de sub-banda (SBC) Codificador avanzado de audio (AAC)
Conecte el micrófono

Panel trasero

Jack de entrada de micrófono

Micrófono (suministrado)

12 ESPAÑOL

Ajuste el ángulo del micrófono

Asegúrelo mediante abrazaderas para cable (no suministradas) si fuera necesario.

BLUETOOTH®
Emparejar y conectar por primera vez un dispositivo Bluetooth
1 Pulse botón fuente para encender la unidad. 2 Busque y seleccione “KD-R9 BT”/”KD-R8 BT”/”KD-R7 BT” en el dispositivo Bluetooth.
“BT PAIRING” parpadea en la pantalla. · En el caso de algunos dispositivos Bluetooth, puede ser necesario ingresar el número de identificación
personal (código PIN) inmediatamente después de la búsqueda. 3 Realice (A) o (B) dependiendo de los datos mostrados en la pantalla.
En el caso de algunos dispositivos Bluetooth, la secuencia de emparejamiento puede diferir de lo descrito en los siguientes pasos. (A) KD-R992BT/KD-R899BT /KD-R794BT/KD-R792BT:
“[Nombre del dispositivo]” “XXXXXX” “VOL YES” “BACK NO” KD-R891BT: “[Nombre del dispositivo]” “XXXXXX” “ENTER YES” “BACK NO” “XXXXXX” es una clave de 6 dígitos que se genera aleatoriamente durante cada emparejamiento.
Asegúrese de que las claves que aparecen en la unidad coincidan con las que aparecen en el dispositivo Bluetooth. Pulse lo siguiente para confirmar la clave. KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: rueda de volumen KD-R891BT: Opere el dispositivo Bluetooth para confirmar la clave. (B) KD-R992BT/KD- R899BT/KD-R794BT/KD-R792BT: “[Nombre del dispositivo]” “VOL YES” “BACK NO” KD-R891BT: “[Nombre del dispositivo]” “ENTER YES” “BACK NO” Pulse lo siguiente para iniciar el emparejamiento. KD-R992BT/KD-R899BT/KD-R794BT/KD- R792BT: rueda de volumen KD-R891BT: · Si “PAIRING” “PIN 0000” aparece en la pantalla, ingrese el código PIN “0000” en el dispositivo
Bluetooth. Puede cambiar el código PIN deseado antes del emparejamiento. ( 17) · Si solo aparece “PAIRING”, opere el dispositivo Bluetooth para confirmar el emparejamiento.
El mensaje “PAIRING COMPLETED” aparece cuando ha finalizado el emparejamiento; ” ” se iluminará cuando se establezca la conexión Bluetooth.
· Esta unidad es compatible con Emparejamiento Simple y Seguro (SSP). · Pueden registrarse (emparejarse) hasta cinco dispositivos en total. · Una vez finalizado el procedimiento, el dispositivo Bluetooth quedará registrado en la unidad aunque la
reinicialice. Para borrar el dispositivo emparejado, 17, [DEVICE DELETE].

· Pueden conectarse dos teléfonos Bluetooth y un dispositivo de audio Bluetooth a la vez. No obstante, mientras está activada la fuente BT AUDIO, es posible conectar a cinco dispositivos de audio Bluetooth y cambiar entre los cinco dispositivos. ( 19)
· Algunos dispositivos Bluetooth pueden no conectarse automáticamente a la unidad después del emparejamiento. Conecte el dispositivo a la unidad manualmente.
· Si desea más información, consulte el manual de instrucciones del dispositivo Bluetooth.

Emparejamiento automático

La solicitud de emparejamiento (a través de Bluetooth) se activa automáticamente al conectar los siguientes dispositivos al terminal de entrada USB.

KD-R992BT/KD-R899BT/KD-R891BT: Dispositivo iPhone/

iPod touch/Android

KD-R794BT/KD-R792BT:

Dispositivo Android

Pulse lo siguiente para emparejar una vez confirmado el nombre del dispositivo. KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: rueda de volumen KD- R891BT:

La solicitud de emparejamiento automático se activa únicamente si: Está activada la función Bluetooth del dispositivo conectado. [AUTO PAIRING] está ajustado a [ON]. ( 18) La aplicación JVC MUSIC PLAY está instalada en el dispositivo
Android ( 8) y la opción [AUTO MODE] seleccionada ( 9).

ESPAÑOL 13

BLUETOOTH®
BLUETOOTH — Teléfono móvil Con respecto a la disposición de las teclas en la placa frontal, consulte la página 3 o la página 4.
Recibir una llamada
Cuando se recibe una llamada entrante: · KD-R992BT:
Los botones parpadean en el color que ha seleccionado en [RING COLOR]. ( 15) KD-R891BT: El botón simbólico parpadea en el color que ha seleccionado en [RING COLOR]. ( 15) KD-R899BT/KD-R794BT/KD-R792BT: Los botones parpadean en el patrón de parpadeo que ha seleccionado en [RING ILLUMI]. ( 15) · Si [AUTO ANSWER] está ajustado al tiempo seleccionado, la unidad contesta automáticamente la llamada. ( 15) Durante una llamada: · KD-R992BT: Los botones dejan de parpadean y se iluminan en el color que ha seleccionado en [RING COLOR]. ( 15) KD-R891BT: El botón simbólico deja de parpadear y se ilumina en el color que ha seleccionado en [RING COLOR]. ( 15) KD-R899BT/KD- R794BT/KD-R792BT: Los botones dejan de parpadear. · Si apaga la unidad o extrae el placa frontal, la conexión Bluetooth se interrumpe.

Las siguientes operaciones pueden diferir o no estar disponibles dependiendo del teléfono que se haya conectado.

Para

En la placa frontal

Primera llamada entrante…

Contestar una llamada

Pulse

o el siguiente botón.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

Rechazar una llamada

Pulse y mantenga pulsado

o el

siguiente botón.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

Finalizar una llamada

Pulse y mantenga pulsado

o el

siguiente botón.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

Mientras habla con la primera llamada entrante…

Responder a otra llamada entrante y dejar en espera la llamada actual

Pulse

o el siguiente botón.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

Rechazar otra llamada entrante

Pulse y mantenga pulsado

o el

siguiente botón.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

14 ESPAÑOL

BLUETOOTH®

Para

En la placa frontal

Mientras tiene dos llamadas activas…

Finalizar la llamada actual y activar la llamada en espera

Pulse y mantenga pulsado

o el siguiente

botón.

KD-R992BT/KD-R899BT/

KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

Pase de la llamada actual a la Pulse

llamada en espera y viceversa

Ajustar el volumen del teléfono*1 [00] a [35] (Predeterminado: [15])

Realice la siguiente operación durante una

llamada.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Gire la rueda de volumen

KD-R891BT: Pulse

Cambiar entre los modos manos Pulse libres y conversación privada*3

durante una llamada.

1 Este ajuste no influirá en el volumen del resto de las fuentes. 2 Pulse y mantenga pulsado VOL + para aumentar continuamente el volumen a 15. *3 Las operaciones pueden variar dependiendo del dispositivo Bluetooth conectado.

Mejorar la calidad de voz

Mientras habla por teléfono….

1 Pulse y mantenga pulsado

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para realizar el ajuste

(consulte la siguiente tabla).

3 Repita el paso 2 hasta que se seleccione o active el elemento deseado.

4 Pulse

para salir.

Para volver al elemento de ajuste anterior, pulse

MIC GAIN NR LEVEL ECHO CANCEL

Predeterminado: XX
LEVEL 10 a LEVEL +10 (LEVEL 04): La sensibilidad del micrófono aumenta a medida que aumenta el número.
LEVEL 05 a LEVEL +05 (LEVEL 00): Ajuste el nivel de reducción de ruido hasta que el ruido que se escucha durante una conversación telefónica sea mínimo.
LEVEL 05 a LEVEL +05 (LEVEL 00): Ajuste el tiempo de retardo de cancelación de eco hasta que el eco que escucha durante una conversación telefónica sea mínimo.

Realice los ajustes para recibir una llamada

1 Pulse

para ingresar al modo Bluetooth.

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para

realizar el ajuste (consulte la siguiente tabla).

3 Repita el paso 2 hasta que se seleccione o active el elemento

deseado.

Para volver al elemento de ajuste anterior, pulse

Predeterminado: XX

SETTINGS AUTO ANSWER RING COLOR
RING ILLUMI

01 SEC a 30 SEC: La unidad contesta automáticamente las llamadas entrantes en el tiempo seleccionado (en segundos). ; OFF: Se cancela.
KD-R992BT/KD-R891BT: COLOR 01 a COLOR 49 (COLOR 08): Selecciona el color de iluminación de los botones o del botón simbólico como notificación cuando se recibe una llamada entrante y durante la llamada. ; OFF: Se cancela.
KD-R899BT/KD-R794BT/KD-R792BT: BLINK 01 a BLINK 05 (BLINK 02): Selecciona el patrón de parpadeo de los botones como notificación cuando se recibe una llamada entrante. ; OFF: Se cancela.

ESPAÑOL 15

BLUETOOTH®

BATT/SIGNAL*

KD-R992BT/KD-R891BT: AUTO: Muestra el estado de la carga y la intensidad de la señal cuando la unidad detecta un dispositivo Bluetooth y se conecta el dispositivo Bluetooth. ; OFF: Se cancela.

La funcionalidad depende del tipo de teléfono en uso.

Realizar una llamada

Puede realizar una llamada desde el historial de llamadas, la guía telefónica o mediante marcación del número. La llamada con marcación por voz también es posible si su teléfono móvil dispone de esta función.

1 Pulse

para ingresar al modo Bluetooth.

Aparece “(nombre del primer dispositivo)”.

· Si hay dos teléfonos Bluetooth conectados, pulse nuevamente

para

cambiar al otro teléfono.

Aparece “(nombre del segundo dispositivo)”.

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para realizar el

ajuste (consulte la siguiente tabla).

3 Repita el paso 2 hasta que se seleccione o active el elemento que desee

o siga las instrucciones indicadas en el elemento seleccionado.

Para volver al elemento de ajuste anterior, pulse

RECENT CALL

(Solo si el teléfono es compatible con PBAP.) 1 Pulse el siguiente botón para seleccionar un nombre o un número de teléfono.
KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: rueda de volumen KD-R891BT: · “<” indica llamada recibida, “>” indica llamada realizada, “M” indica llamada perdida. · El mensaje “NO HISTORY” aparece si no existe un historial de llamadas o número de
llamada registrado. 2 Pulse lo siguiente para hacer una llamada.
KD-R992BT/KD-R899BT/ KD-R794BT/KD-R792BT: rueda de volumen KD-R891BT:

PHONEBOOK DIAL NUMBER VOICE

(Solo si el teléfono es compatible con PBAP.)

1 Pulse

para seleccionar la letra que desee (A a Z, 0 a 9, y OTHERS).

· Aparece”OTHERS”si el primer carácter no es una letra (A a Z) ni un número (0 a 9).

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar un nombre.

3 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar el número de

teléfono que desea llamar.

· La guía telefónica del teléfono conectado se transfiere automáticamente a la unidad cuando se realiza el emparejamiento.
· Esta unidad puede visualizar solamente letras sin acento. (Las letras acentuadas tal como la “Ú” se muestra como “U”.)

1 Realice la siguiente operación para seleccionar un número (0 a 9) o un carácter ( , #, +).

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Gire la rueda de volumen

KD-R891BT: Pulse

2 Pulse

para mover la posición de ingreso.

Repita los pasos 1 y 2 hasta finalizar el ingreso del número telefónico.

3 Pulse lo siguiente para hacer una llamada.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

rueda de volumen

KD-R891BT:

Pronuncie el nombre del contacto al que desea llamar o el comando de voz para controlar las funciones del teléfono. ( Realice una llamada mediante reconocimiento de voz)

Realice una llamada mediante reconocimiento de voz

1 Pulse y mantenga pulsado

para activar el teléfono conectado.

2 Pronuncie el nombre del contacto al que desea llamar o el comando de

voz para controlar las funciones del teléfono.

· Las características de reconocimiento de voz compatibles varían según el teléfono. Si desea más información, consulte el manual de instrucciones del teléfono conectado.
· Esta unidad también es compatible con las funciones de asistente personal inteligente de iPhone.

16 ESPAÑOL

BLUETOOTH®

Ajustes en la memoria

Almacenar un contacto en la memoria Puede guardar hasta 6 contactos en los botones numéricos (1 a 6).

1 Pulse

para ingresar al modo Bluetooth.

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar

un número de preajuste [RECENT CALL], [PHONEBOOK] o [DIAL NUMBER].

3 Realice la operación `seleccionar un elemento ( 3 o 4)’ para seleccionar

un contacto o ingrese un número de teléfono.

Si se ha seleccionado un contacto, pulse lo siguiente para que aparezca el número

de teléfono.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

4 Pulse y mantenga pulsado uno de los botones numéricos (1 a 6).

Aparece “MEMORY P(número de preajuste seleccionado)” cuando se guarda el

contacto.

Para borrar un contacto de la memoria preajustada, seleccione [DIAL NUMBER] en el paso 2 y almacene un número en blanco.

Realizar una llamada desde la memoria

1 Pulse

para ingresar al modo Bluetooth.

2 Pulse uno de los botones numéricos (1 a 6).

3 Pulse lo siguiente para hacer una llamada.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: rueda de volumen

KD-R891BT:

Aparece “NO PRESET” si no hay ningún contacto guardado.

Ajustes del modo Bluetooth

1 Pulse y mantenga pulsado

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para realizar el

ajuste (consulte la siguiente tabla).

3 Repita el paso 2 hasta que se seleccione o active el elemento que desee

o siga las instrucciones indicadas en el elemento seleccionado.

4 Pulse

para salir.

Para volver al elemento de ajuste anterior, pulse

Predeterminado: XX

BT MODE

PHONE SELECT AUDIO SELECT

Selecciona el teléfono o el dispositivo de audio que desea conectar o desconectar. Al conectarse, aparece” “delante del nombre del dispositivo. Aparece” “delante del actual dispositivo de audio para reproducción.

DEVICE DELETE

1 Realice la operación seleccionar un elemento ( dispositivo que desea borrar. 2 Realice la operaciónseleccionar un elemento ( [NO].

3 o 4)’ para seleccionar el 3 o 4)’para seleccionar [YES] o

PIN CODE EDIT (0000)

Cambia el código PIN (hasta 6 dígitos).

1 Realice la siguiente operación para seleccionar un número.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Gire la rueda de volumen

KD-R891BT: Pulse

2 Pulse

para mover la posición de ingreso.

Repita los pasos 1 y 2 hasta terminar de ingresar el código PIN.

3 Para confirmar, pulse lo siguiente.

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

rueda de volumen

KD-R891BT:

Solo se pueden conectar un máximo de dos teléfonos con Bluetooth y un dispositivo de audio con Bluetooth a la vez.

ESPAÑOL 17

BLUETOOTH®

RECONNECT AUTO PAIRING
INITIALIZE INFORMATION

ON: La unidad restablecerá automáticamente la conexión cuando el dispositivo Bluetooth conectado en último término vuelva dentro del rango. ; OFF: Se cancela.
ON: La unidad empareja automáticamente el dispositivo Bluetooth compatible (iPhone/ iPod touch/dispositivo Android) cuando se lo conecta a través del terminal de entrada USB. Esta función podrá no estar disponible, dependiendo del sistema operativo del dispositivo conectado. ; OFF: Se cancela.
YES: Inicializa todos los ajustes Bluetooth (incluyendo el emparejamiento almacenado, directorio telefónico y etc.). ; NO: Se cancela.
MY BT NAME: Muestra el nombre de la unidad (“KD-R9 BT”/”KD-R8 BT”/ “KD-R7 BT”). ; MY ADDRESS: Muestra la dirección de la unidad.

Modo de comprobación de compatibilidad Bluetooth

Puede comprobar la conectividad del perfil compatible entre el dispositivo Bluetooth

y la unidad.

· Asegúrese de que no haya ningún dispositivo Bluetooth emparejado.

1 Pulse y mantenga pulsado

Aparece “BLUETOOTH” “CHECK MODE”. “SEARCH NOW USING PHONE”

“PIN IS 0000” se desplazan en la pantalla. 2 Busque y seleccione “KD-R9 BT”/”KD-R8 BT”/”KD-R7 BT” en el

dispositivo Bluetooth en el lapso de 3 minutos. 3 Realice (A), (B) o (C) dependiendo de los datos mostrados en la pantalla.

(A) “PAIRING” “XXXXXX” (Clave de paso de 6 dígitos): Asegúrese de que

la clave de paso que aparece en la unidad coincida con la que aparece en el

dispositivo Bluetooth y, a continuación, opere el dispositivo Bluetooth para

confirmar la clave de paso.

(B) “PAIRING” “PIN IS 0000”: Ingrese “0000” en el dispositivo Bluetooth.

Una vez realizado el emparejamiento, aparece “PAIRING OK” “[Nombre del dispositivo]” y se inicia la comprobación de compatibilidad con Bluetooth. Si aparece “CONNECT NOW USING PHONE”, opere el dispositivo Bluetooth para que se pueda continuar el acceso al directorio telefónico. “TESTING” parpadea en la pantalla.
El resultado de la conectividad parpadea en la pantalla. “PAIRING OK” y/o “HANDS-FREE OK”1 y/o “AUD.STREAM OK”2 y/o “PBAP OK”3 : Compatible 11Compatible con el Perfil Manos Libres (HFP, Hands-Free Profile) 2 Compatible con el Perfil Avanzado de Distribución de Audio (A2DP, Advanced Audio Distribution Profile) 3 Compatible con el Perfil de acceso a la guía telefónica (PBAP, Phonebook Access Profile)
Después de 30 segundos, aparece “PAIRING DELETED” para indicar que se ha eliminado el emparejamiento y la unidad sale del modo de comprobación.
· Para cancelar, pulse y mantenga pulsado botón fuente para apagar la unidad y luego vuélvala a encender.

18 ESPAÑOL

BLUETOOTH®
BLUETOOTH — Audio Con respecto a la disposición de las teclas en la placa frontal, consulte la página 3 o la página 4. Mientras está activada la fuente BT AUDIO, es posible conectar a cinco dispositivos de audio Bluetooth y cambiar entre los cinco dispositivos.

Reproductor de audio a través de Bluetooth 1 Pulse repetidas veces el botón fuente para seleccionar BT AUDIO.
· Si pulsa se accede directamente a BT AUDIO. 2 Opere el reproductor de audio Bluetooth para comenzar la reproducción.

Para

En la placa frontal

Reproducción/pausa

KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:

Pulse la rueda de volumen.

KD-R891BT: Pulse

Seleccione un grupo o

Pulse

carpeta

Omisión hacia atrás/omisión Pulse

hacia delante

Retroceder/avanzar

Pulse y mantenga pulsado

rápidamente

Repetir reproducción

Pulse

repetidamente.

TRACK REPEAT, ALL REPEAT, REPEAT OFF

Reproducción aleatoria

Pulse

repetidamente.

GROUP RANDOM, ALL RANDOM, RANDOM OFF

Seleccionar un archivo de una carpeta/lista

Consulte el apartado “Seleccionar un archivo de una carpeta/ lista” que aparece en la página 10.

Cambiar entre los dispositivos de audio Bluetooth conectados

Pulse 5.*

Si pulsa la tecla”Play”en el dispositivo conectado también se cambiará el sonido generado por el dispositivo.
Las operaciones y las indicaciones en pantalla difieren según su disponibilidad en el dispositivo conectado.

Ajustes para utilizar la JVC Remote aplicación

La aplicación JVC Remote ha sido diseñada para controlar las operaciones del receptor para automóvil JVC desde los siguientes dispositivos.

KD-R992BT/KD-R899BT/KD-R891BT: iPhone/iPod (a través de Bluetooth

o a través del terminal de entrada

USB) o smartphone Android (a

través de Bluetooth)

KD-R794BT/KD-R792BT:

Smartphone Android (a través de

Bluetooth)

Preparativos: Antes de la conexión, instale la versión más reciente de la aplicación JVC Remote en su dispositivo. Para obtener más información, visite http://www.jvc.net/cs/car/.

1 Pulse y mantenga pulsado

2 Realice la operación `seleccionar un elemento ( 3 o 4)’ para

realizar el ajuste. ( 20)

3 Repita el paso 2 hasta que se seleccione o active el elemento

deseado.

4 Pulse

para salir.

Para volver al elemento de ajuste anterior, pulse

ESPAÑOL 19

BLUETOOTH®

Predeterminado: XX

REMOTE APP

SELECT

Seleccione el dispositivo (IOS o ANDROID) en el que desea ejecutar la aplicación.

IOS

YES: Seleccione iPhone/iPod para usar la aplicación a través de Bluetooth o a través del terminal de

entrada USB conectado. ; NO: Se cancela.

Si se selecciona IOS, seleccione la fuente iPod BT (o iPod USB si su iPhone/iPod está conectado a

través del terminal de entrada USB) para activar la aplicación.

· La conectividad de la aplicación será interrumpida o desconectada si:

Se cambia de la fuente iPod BT a cualquier fuente de reproducción conectada a través del

terminal de entrada USB.

Se cambia de la fuente iPod USB a la fuente iPod BT.

ANDROID YES: Seleccione smartphone Android para usar la aplicación a través de Bluetooth. ; NO: Se cancela.

ANDROID LIST*

Seleccione en la lista el smartphone Android a usar.

STATUS

Muestra el estado del dispositivo seleccionado. IOS CONNECTED: Puede utilizar la aplicación mediante el iPhone/iPod conectado a través de Bluetooth o del terminal de entrada USB. IOS NOT CONNECTED: No se ha conectado ningún dispositivo IOS para usar la aplicación. ANDROID CONNECTED: Puede usar la aplicación mediante el smartphone Android conectado a través de Bluetooth. ANDROID NOT CONNECTED: No se ha conectado ningún dispositivo Android para usar la aplicación.

Se visualiza sólo cuando [ANDROID] de [SELECT] se ajusta a [YES].

Escuchar el iPhone/iPod a través de Bluetooth (para KD-R992BT/KD-R899BT/KD- R891BT)
Puede escuchar las canciones en el iPhone/iPod a través de la conexión Bluetooth de esta unidad. Pulse repetidas veces el botón fuente para seleccionar iPod BT. · Puede operar el iPod/iPhone de la misma forma en que lo hace cuando el iPod/
iPhone está conectado a través del terminal de entrada USB. ( 8) · Si conecta un iPhone/iPod al terminal de entrada USB mientras escucha una fuente
iPod BT, la fuente cambiará automáticamente a iPod USB. Pulse botón fuente para seleccionar iPod BT si el dispositivo aún está conectado a través de Bluetooth.
Radio Internet a través de Bluetooth
Puede escuchar Spotify en el iPhone/iPod touch/dispositivo Android a través de la conexión Bluetooth de esta unidad. · Asegúrese de que el terminal de entrada USB no esté conectado a ningún
dispositivo.
Escuchar Spotify Preparativos: Seleccione [ON] para [SPOTIFY SRC] en [SOURCE SELECT]. ( 5) 1 Abra la aplicación Spotify en su dispositivo. 2 Conecte su dispositivo a través de la conexión Bluetooth. ( 13) 3 Pulse botón fuente repetidamente para seleccionar SPOTIFY (para
iPhone/iPod) o SPOTIFY BT (para el dispositivo Android). La fuente cambia y la emisión comienza automáticamente. · Puede operar Spotify de la misma forma en que lo hace cuando Spotify está conectada a través del terminal de entrada USB. ( 11)

20 ESPAÑOL

AJUSTES DE AUDIO

Con respecto a la disposición de las teclas en la placa frontal, consulte la página 3 o la página 4.

1 Pulse y mantenga pulsado

2 Realice la operación `s

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual >>

JVC KD-R992BT CD Receiver Instruction Manual

JVC KD-R992BT CD Receiver

Product Information

Product Usage Instructions

Getting Started

Frequently Asked Questions (FAQ)

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

JVC User Manuals

Related Manuals