carmanah MX Series Passive Sensor Kit Installation Guide

June 12, 2024
carmanah

carmanah-logo

carmanah MX Series Passive Sensor Kit

Product Information

The MX Series is a passive sensor kit designed for pedestrian safety. It includes two sensor models: SmartWalk Sensor and TC26-B Sensor. The SmartWalk Sensor is compatible with solar systems and can be used with pedestrian push buttons for manual activation.

Note

  • This guide only covers interfacing the sensor to power and flasher modules. Sensor must be configured per manufacturer’s documentation to operate properly.
  • Ensure correct sensor model is used for each application:
    • SmartWalk XP-S: crosswalk pedestrian sensing
    • SmartWalk TX-S: trail user sensing
    • TC26-B: vehicle sensing
  • Pedestrian push buttons should be used in parallel with SmartWalk sensors to provide manual activation option.

Caution: Only SmartWalk model numbers ending in “-S” can be used with solar systems.

Installing Instructions

  1. Prepare pole and install bracket and sensor per manufacturer’s instructions.
  2. Ensure SmartWalk DIP switch #4 (Fail Safe) is set to OFF position.
  3. Fish sensor cable through pole. Cap (or cut at end of jacket if permitted by local regulations) unused white wire.carmanah-MX-Series-Passive-Sensor-Kit-fig-1
  4. Except when connecting directly to MX 400 (which has screw terminals to accept spade/ring terminals), cut off terminals from wire ends and strip insulation 0.35″.
  5. Connect sensor wires to power or flasher module trigger terminals per table below.
  6. Configure sensor per manufacturer’s instructions and perform a walk/drive-by test to confirm proper operation.

Sensor Terminal

|

Wire Color

| Power or Flasher

Module Trigger Input Terminal

|
---|---|---|---
N.O. (Normally Open)| Brown or Orange| A| Input +
COM| Green| B| Input −
N.C. (Normally Closed)| White| Not Connected
PWR +| Red| C| 12V OUT +
PWR −| Black| D| 12V OUT −

NOTE: READ ALL INCLUDED INSTALL GUIDES BEFORE SYSTEM INSTALLATION

Carmanah Technologies Corp.
Address: 250 Bay St, Victoria, BC V9A 3K5, Canada
Phone: 1.250.380.0052
Email: customersupport@carmanah.com
Website: carmanah.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals