carmanah MX Series Integrated Beacon Mount Kit Installation Guide
- June 12, 2024
- carmanah
Table of Contents
carmanah MX Series Integrated Beacon Mount Kit Installation Guide
Installation Guide
Note:
Assembly order depicted may be modified to suit preference and does not
include cable routing steps.
Note:
Top of pole mount and beacon may differ from those shown.
- Side of pole only: drill holes if through-bolting and/or cable hole required. Install mount onto pole with suitable fasteners or banding (not included). Remove mount cap and insert nut into channel.
- Install lock ring (top of pole) or gasket (side of pole) onto mount.
- Orient and fasten beacon onto mount with nipple and load spreader plate (12″ only, comes with beacon).
- Assemble power module loosely with lock ring, gasket and nut as shown.
- Orient solar panel to face south (in North America) and tighten nut.
- Side of pole only: replace end cover.
Failure to install gasket could result in water entry and product damage.
NOTE: READ ALL INCLUDED INSTALL GUIDES BEFORE SYSTEM INSTALLATION
Carmanah Technologies Corp.
250 Bay St, Victoria, BC V9A 3K5, Canada
1.250.380.0052
customersupport@carmanah.com
carmanah.com
References
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>