renkforce RF-PM-190 LED Metal Monitor 48.1 cm 19 Inch Instruction Manual

RF-PM-190 LED Metal Monitor 48.1 cm 19 Inch
Instruction Manual
Item No. 2616623

Introduction

Dear customer,
Thank you for purchasing this product.
If there are any technical questions, please contact: www.conrad.com/contact

Intended use

This product is a 48.1 cm (19″) monitor for desktop or wall mounting, with built-in speakers and remote control. The product is equipped with HDMI, VGA, BNC (CVBS), and RCA video input ports, a 3.5 mm audio input jack, a 3.5 mm audio output jack, and a USB (2.0) port to play supported photo, music, or video files from a USB storage device. The product includes mounting kits for desktop or wall installation. The product is also compatible with standard 75 mm and 100 mm VESA mounts (not included).
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances. The product is designed for industrial and commercial use.
If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.

Delivery content

• Monitor
• Power adapter
• Remote control
• 1 x Desk mounting stand
• 2 x L-shaped wall mounting strips (left and right sides)
• 59 x Mounting screws
• 1 x VGA cable
• 1 x BNC cable
• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

www.conrad.com/downloads

Description of symbols

The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
7.1 General information

• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

7.2 Handling

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Before cleaning or handling cable connections, always turn off and unplug the monitor and all connected (to be connected) devices.
• Do not scratch or poke the screen with your fingernails or any hard or sharp objects to avoid damage.

7.3 Operating environment
Do not place any objects filled with liquids near the device (such as drinks or flower vases) to avoid electric shock or hazards.

• Protect the product from high humidity and moisture.
• Do not install the product on an unstable desk or hollow wall that cannot support the weight of the product.
• Do not block or cover the ventilation holes or any openings on the product with foreign objects.
• Do not cover or place any object on the product to avoid possible damage or personal injury.
• Do not place the product under any mechanical stress.
• Protect the product from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from direct sunlight.
• Do not switch the product on after it has been taken from a cold to a warm environment. The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
• Never operate the product in direct proximity of strong magnetic or electromagnetic fields or transmitter aerials or HF generators. Doing so can prevent the product from functioning properly.

7.4 Operation

• Consult an expert when in doubt about the operation, safety or connection of the appliance.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  – is visibly damaged,
  – is no longer working properly,
  – has been stored for extended periods in poor ambient conditions or
  – has been subjected to any serious transport-related stresses.

7.5 Power adapter
Do not modify or repair mains supply components including mains plugs, mains cables, and power supplies. Do not use damaged components. Risk of death by electric shock!

• Connect the appliance to a wall socket that can be accessed easily.

• As power supply, only use the supplied mains adaptor.

• Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.

• Never connect or disconnect power adaptors if your hands are wet.

• Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on the plug.

• For safety reasons, disconnect the power adaptor from the mains socket during storms.

• Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
  – Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
  – Unplug the power adapter from the mains socket.
  – Use a new power adapter of the same design. Do not use the damaged adapter again.

• Ensure that cables are not pinched, kinked or damaged by sharp edges.

• Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.

7.6 Connected devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

Product overview

8.1 Monitor

1. Power indicator light
2. IR receiver (for remote control signal)
3. DC power input
4. VGA input port
5. HDMI input port
6. RCA input jacks (AV)
7. 3.5 mm Audio input jack
8. 3.5 mm Audio output jack
9. USB (2.0) port| 10. BNC
11. /OK  button / – Vol
12. button / + Vol
13. Power button
14. Down button
15. Menu button
16. Speakers
17. 75 mm and 100 mm VESA hole patterns
---|---

8.2 Remote control

A. Power button
B. Fast backward: Music/Video usage in USB channel
C. Arrow keys
D. Input selection
E. Volume +/
F. Return| G. Fast forward: Music/Video usage in USB channel
H. Menu
I. OK
– Confirm selection
– Display the status bar when playing pictures, music, and videos in the USB channel
J. Display current channels
K. Sleep mode
---|---

Installing the batteries in the remote control

1. Open the battery compartment cover on back of the remote control.
2. Insert the new batteries (2x 1.5 V AAA batteries, not included), following the + and – ends indicated inside the battery compartment.
3. Close the battery compartment cover.

Installing the monitor

• Tool needed: Cross-head screwdriver.
• Turn the screws clockwise to tighten and anti-clockwise to loosen.

A| | Butterfly screw for desk stand| x 2
B| | Screw for desk stand| x 2
C| | Screw for desk (The table has been drilled)| x 13
D| | Screw for wooden desk| x 5
E| | Screw for wall mounting| x 13
F| | Self-tapping screw for wall| x 12
G| | Plastic wall anchor| x 12
H| | Desk mounting stand| x 1
I| | L-shaped wall mounting strip (left and right)| x 2

10.1 Desktop installation

1. Turn off the monitor and all connected (to be connected) devices, and unplug them from the mains socket.
2. Align the holes on the arms of the desk mounting stand with the corresponding holes on both sides of the back of the monitor, as illustrated.
3. Tighten the screws (B) in the centre hole of the arms to attach the stand to the monitor.
4. Adjust the monitor to the desired angle and tighten the butterfly screws (A) into the curved slot, as illustrated, to fix the monitor at that angle. The butterfly screws allow you to adjust and fix the angle of the monitor.
5. Place the monitor on a sturdy, level, and stable desk. Secure the stand to the desk with 4 mounting screws (C or D), as illustrated.
   WARNING! The desk mounting stand of the monitor is designed to be secured to the desk with the 4 mounting screws (C or D). Do not use the monitor without securing the stand with the 4 mounting screws as the monitor will be unstable and can fall.

10.2 Wall installation
Install the monitor on a flat, stable wall that is strong enough to support its weight.

1. Turn off the monitor and all connected (to be connected) devices, and unplug them from the mains socket.
2. You can choose between recessed mount (OPTION A) or flushed mount (OPTION B), depending on how you orient the L-shaped strips.
3. Align the L-shaped strips (I) on both sides of the monitor frame (OPTION A or B) and mark the desired positions on the wall before installing. Take into account the cable lengths.
4. Use 8 screws (E) to attach the strips to the sides of the monitor, 12 self-tapping screws and 12 plastic wall anchors (F and G) to install the strips on the wall following the corresponding illustrations.

10.3 Installation with VESA mount (not included)
The monitor is designed with 75 mm and 100 mm VESA hole patterns.
If you prefer, mount the monitor on a suitable VESA mount.

Connecting the monitor

1. Connect a video source device to the VGA, HDMI, RCA, or BNC inputs on the bottom of the monitor using a suitable cable. The VGA and BNC cables are included with the product.
2. Connect the included power adapter to the DC input (12 V/DC) on the monitor and to the mains socket.

Using the monitor

PRECONDITION:
Monitor is securely installed on the desk or wall.

1. Turn on the video source device.

2. Turn on the monitor by pressing the Power button on the remote control or back of the monitor.
   Æ The monitor will display the Renkforce logo welcome screen.

3. If required, press the INPUT button on the remote control to select the source device connected to the monitor.

4. Use the buttons and directional arrows on the remote control to quickly access functions and navigate through menu options. Five control buttons are also available on the back of the monitor:
   /OK : – button/– volume/confirmation button
   : + button/+ volume
   : Turns the monitor on/off
   : Navigates down the screen menu
   : Accesses the Main Menu/Return button

5. To set the monitor to your preferred settings, press the Menu button on the remote control or monitor to access the Main Menu:
   – PICTURE
   – SOUND
   – TIME
   – OPTION

6. You can switch the on-screen display (OSD) language to English (default) or German in OPTION.

7. To enjoy your photos, music, or video files saved in a USB storage device, plug the USB device into the USB (2.0) port on the monitor and press the INPUT button on the remote control to select USB as the source.
   Note: Before connecting your USB storage device to the monitor, always backup your files to protect them from damage or loss.

8. After use, press the Power button to turn the monitor off. Unplug the power adapter from the mains outlet if the monitor will not be used for a long period of time.

Troubleshooting

■ Make sure the power adapter is firmly connected to the monitor and mains socket.
■ Check that the mains outlet has power.
No image is shown on the screen.| ■ Check the power and cable connections.
■ The input source selected is incorrect. If the “No Signal” message is shown on the screen, change the source by pressing the INPUT button on the remote control and press OK to confirm.
Contrast, Brightness, Colour, Sharpness and Tint options are disabled.| Set the Picture Mode to “User”.
Screen image is not centered or sized properly.| Adjust the Aspect Ratio in PICTURE via the Menu button.
Image colours do not seem correct.| Adjust the Colour Temperature in PICTURE via the Menu button.
Image bounces, flickers, or has wave patterns.| Move electrical or wireless devices that may cause interference away from the monitor.
Image is blurry, or has a ghosting or shadowing problem.| ■ Adjust the Contrast and Brightness in PICTURE > Picture Mode via the Menu button.
■ Make sure you are not using an extension video cable or switch box.

Cleaning and care

Important:
– Do not use harsh cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
– Do not rinse the product under the tap or expose to moisture.
– Do not immerse the product in water.

1. Disconnect the product and connected devices from the mains outlet before cleaning.
2. Clean the monitor with a soft, dry cloth.
3. Wipe the screen with a soft, clean and dry cloth. If necessary, add a few drops of lens cleaning solution to the cloth, or use a lens cleaning tissue.
4. Store the product in a shaded, cool and dry place.

Disposal

15.1 Product
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
15.2 (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them separately from the product. According to the Battery Directive, end users are legally obliged to return all spent batteries/rechargeable batteries; they must not be disposed of in the normal household waste.
Batteries/rechargeable batteries containing hazardous substances are labelled with this symbol to indicate that disposal in household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever (rechargeable) batteries are sold. You thus fulfil your statutory obligations and contribute to environmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit and their exposed terminals should be covered completely with insulating tape before disposal. Even empty batteries/rechargeable batteries can contain residual energy that may cause them to swell, burst, catch fire or explode in the event of a short circuit.

Technical data

16.1 Power supply
Input voltage/current ……………………………………..12 V/DC, 4 A
Power consumption ………………………………………48 W
Standby power consumption ………………………….<0.5 W
16.2 Power adapter
Input voltage/current ……………………………………..100–240 V/AC, 50/60 Hz, max. 1.5 A
Output voltage/current …………………………………..12 V/DC, 4 A, 48 W
16.3 Remote control
Battery ……………………………………………………….. 3.0 V, 2x 1.5 V AAA batteries (batteries not included)
16.4 Display
Energy efficiency rating …………………………………F
Display size (diagonal) ………………………………….48.1 cm (19″)
Display size (W x H) ……………………………………..377 x 302 mm
Resolution ……………………………………………………1280 x 1024 pixels
Image format ……………………………………………….5:4
Horizontal viewing angle ………………………………..170°
Vertical viewing angle ……………………………………160°
Contrast ratio ……………………………………………….1000:1
Brightness ……………………………………………………250 cd/m²
Response time ……………………………………………..5 ms
Refresh rate …………………………………………………75 Hz
Opening screen ……………………………………………Renkforce
OSD language ……………………………………………..English (default)/German
16.5 Ports
Built-in ports/jacks ……………………………………… VGA, HDMI, RCA, BNC (CVBS), USB (2.0), 3.5 mm Audio input, 3.5 mm Audio output
USB (2.0) port supported formats …………………… MP4, AVI, MOV, MPG, MP3, JPG, JPEG, PNG Supports USB storage devices up to 64 GB
16.6 Environment
Operating/Storage conditions …………………………0 to +40 °C, 20 – 85 % RH (non- condensing)
16.7 Other
Supported installation …………………………………… Desktop or wall mounted
VESA compatibility ……………………………………….75 x 75 mm/100 x 100 mm
Product dimensions (W x H x D) …………………….422 x 352 x 51 mm
Weight ………………………………………………………..7.4 kg

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.

Item No. 2616623

References

• Conrad Electronic » Alle Teile des Erfolgs
• Conrad Electronic – Alle Teile des Erfolgs
• Conrad Electronic » All parts of success
• Contact
• Download center
• Conrad Electronic Online Shop » Alle Teile des Erfolgs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>