IKEA FIXA 14.4V Hammer Drill Instructions
- June 12, 2024
- Ikea
Table of Contents
FIXA 14.4V Hammer Drill
Instructions
FIXA 14.4V
EU Declaration of Conformity
The product satisfies the provision for CE-marking according to the following
directive(s):
— Low Voltage Directive (LVD) 2014/35/EU
— EMC Directive 2014/30/EU
— RoHS Directive 2011/65/EU + 2015/863
— Machinery Directive 2006/42/EC
Type of equipment: Cordless drill
Brand name or trade mark: IKEA
Type designation: FIXA 14.4V
Manufacturer: IKEA of Sweden AB
Address: Box 702 SE-343 81 Älmhult SWEDEN
Telephone No. : +46(0)476-648500
The following harmonized European standards or technical specifications, which
comply with good engineering practice in safety matters in force within the
EEA, have been applied.
| Tool | Charger |
|---|
EN 62841-1 : 2015
EN 62841-2-1 : 2018 + A11 : 2019
EN IEC 55014-1 : 2021
EN IEC 55014-2 : 2021
EN 50581 : 2012| EN 60335-1 : 2012 + A2 : 2019
EN 60335-2-29 : 2004 + A11 : 2018
EN 62233 : 2008
EN IEC 61000-3-2 : 2019 + A1 : 2021
EN 61000-3-3 : 2013 + A2 : 2021
EN IEC 55014-1 : 2021
EN IEC 55014-2 : 2021
EN 50581 : 2012
Additional information
The product is CE-marked 2019.
We have product surveillance according to IKEA product description.
As the manufacturer/manufacturers authorised representative established within
the EEA, we declare under our sole responsibility that the equipment follows
the provisions of the Directives stated above.
Certificate_Machinery Directive
EC type-Examination No.: AM 50515190 0001
Notified Body: TÜV Rhineland LGA Products GmbH
Address: Tillystraße 2 90431 Nurnberg Germany
Notified Body ident cation no. : 0197
Älmhult, 2022-11-14
Ivan Sisak
Product Engineering Manager BA CHILI iOS
IKEA of Sweden AB
IKEA of Sweden
SE-343 81 Älmhult
© Inter IKEA Systems B.V. 2020
AA-2236106-4