ANKER 535 67W Car Charger User Manual
- June 12, 2024
- Anker
Table of Contents
ANKER 535 67W Car Charger
Using Your Product
Important Safety Instructions
For the fastest and safest charge, use an Anker® cable, your device’s original cable, or another certified cable (such as MFi). Important Safety Instructions.
- SAVE THESE INSTRUCTIONS– This manual contains important safety and operating instructions for car charger Model A2731.
- Before using a car charger, read all instructions and cautionary markings on the car charger.
- Do not expose the charger to rain, moisture, or snow.
- Use of an attachment not recommended or sold by the car charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
- To reduce the risk of damage to the cigarette lighter connector and cord, pull by the cigarette lighter connector rather than the cord when disconnecting the charger.
- Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
- Do not operate the charger with a damaged cord or cigarette lighter connector – replace it immediately.
- Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
- Do not disassemble the charger; take it to a qualified serviceperson when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire
- To reduce the risk of electric shock, unplug the charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
- To reduce the risk of fire or electric shock, do not interconnect output terminations
- CAUTION – For continued protection against the risk of fire, replace only with the same type and ratings of the fuse. Input fuse F1 Rating 48Vdc, 15A,output fuse F2 Rating 48Vdc, 15A.
- The maximum ambient temperature during the use of the appliance must not exceed 25°C.
- Do not hang any type of accessory or accessory bracket from the plug.
SAVE THESE INSTRUCTIONS
Specification
- Input: 12V-24V 7.2A
- Output: Total Output 67W USB-C1/C2: 5V 3A/9V 3A/12V 3A/ 15V 3A/20V 3.35A (67W Max) USB-A: 5V 3A/9V 2A/10V 2.25A/ 12V 1.5A (22.5W Max)
- Size: 60×32×32mm
- Weight: 28.8g
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Declaration of Conformity
- Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.anker.com.
GB Declaration of Conformity
- Hereby, Anker Innovations Limited declares that this product is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.
- This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Anker Innovations Limited
- Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
- Hong Kong
- The following importers are the responsible parties (contract for EU
- and UK matters):
- Anker Technology (UK) Ltd
- GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United
- Kingdom
- Anker Innovations Deutschland GmbH
- Georg-Muche-Strasse 3, 80807 Munich, Germany
warranty
- 18-month limited warranty.
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Lifetime technical support
- (US/CA) +1 (800)988 7973
- (UK) +44 (0) 1604 936200
For tutorial videos, FAQs, manuals, and more
information, please visit: Or scan the QR code below:
https://support.anker.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>